Assembly Instructions Caution: You must read this before you proceed Desk Part List Label Picture Description QTY A Desk Top 1 B Leg 4 Hardware Page 1 of 5
Label Picture ① Description QTY Gasket 5 Assembly Preparation Before Beginning Assembly: Assembly Steps Overview Desk Top (A) Leg (B) Page 2 of 5
This Desk has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Desk parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Black Cover Open the carton and place all parts onto a clean, non-marring surface. Remove the Black Cover on the threaded stem of the Legs(B).
Place Desk Top(A) facedown as pictured above. Install Leg(B) into Desk Top(A) by putting a Gasket(①) onto the threaded stem. Then insert the threaded stem of the Leg(B) into the threaded housing at the bottom of the Desk Top(A) as pictured above. Tighten by turning Leg clockwise. Repeat the same process to install the remaining three Legs. Note:The use of the Gaskets are OPTIONAL and are especially useful to help alleviate slight wobbles.
Page 5 of 5