User Manual

GP5W-Shell and CSView
Overview
GP5W-SHELL is an easy-2-use software interface for our wireless data loggers. Included in
GP5W-Shell is CSView, a graphical viewer. The software can be used for local access of data loggers
as well as remote access (for GSM/GPRS based INTERNET data, only for special version, not
described in this shortform manual)
Requirements
The GP5W-Shell package was tested on WIN 98 SE, XP, VISTA. and Win 7 and Win 8. It was
designed for low CPU load, so it even will run on very small Sub-Notebooks and Netbooks.
Please note: The devices are available with several different radio frequencies, depending on the local
regulations of the country (e.g.: 433 MHz in Europe, parts of Africa and Asia, 905 MHz in USA and
Canada, ...). It is in the responsibility of the user, not to use devices that are not allowed in the country
of usage.
Installation
The latest version can be downloaded for free from our homepage. This manuals describes
GP5W-Shell V2.00.xx
Please start the Setup-Program and follow the instructions before connecting the wireless
USB-Dongle!
The wireless USB-Dongle (here with 433MHz Antenna for use in Europe/Africa/Asia)..
On Request other types of antennas might be available (e.g. beam antennas for longer ranges). The
normal range is between 10 and up to 100 meters (depending on the environment, with special
GP5W-SHELL - Manual - English V2.00 Rev. 26.09.2013
All trademarks are owned by the respective companies
- 1 -
Subject to technical modifications

Summary of content (5 pages)