User's Manual

ManualsBrandsGentex ManualsElectronicsUniversal Garage Door Opener in Mirror

EXHIBIT D: OWNER’S MANUAL [2.1033(A3)]

Recommended Owners Manual for Automatic-Dimming NVS Mirror with Homelink® series

Universal Garage Door Opener, Electronic Compass, Outside Temperature Display and LED Lights.

Automatic-Dimming NVS Mirror with Homelink®, Electronic Compass,

Outside Temperature Display and LED Lights

Suggested Owner’s Manual Text

April 2002

Automatic-Dimming Night Vision Safety (NVS) Mirror

The NVS Mirror in your vehicle is the most advanced way to eliminate dangerous and annoying glare

in the rearview mirror during any driving situation. For more information regarding NVS mirrors and

other applications, please refer to the Gentex website – www.gentex.com.

Precautions

The NVS Mirror automatically reduces glare during driving conditions based upon light levels

monitored in front of the vehicle and from the rear of the vehicle. These light sensors are visible through

openings in the front and rear of the mirror case. Any object that would obstruct either light sensor will

degrade the automatic dimming control feature.

Operation

The NVS Mirror operates automatically whenever the vehicle ignition is ON. The status of the

automatic dimming feature is indicated by a green light on the face of the mirror.

To turn the automatic dimming feature off, press and hold the button with the symbol for more

than 9 seconds but less than 12 seconds. The indicator light will turn off to indicate that the automatic

dimming feature is off.

To turn the automatic dimming feature on, press and hold the button with the symbol for more

than 9 seconds but less than 12 seconds again. The indicator light will also turn on.

If the automatic dimming feature is off when the vehicle ignition is turned off, the automatic dimming

feature will become active when the vehicle ignition is turned back on.

Summary of content (8 pages)

PAGE 1
EXHIBIT D: OWNER’S M ANUAL [2.1033(A3)] Recommended Owners Manual for Automatic-Dimming NVS Mirror with Homelink® series Universal Garage Door Opener, Electronic Compass, Outside Temperature Display and LED Lights.
PAGE 2
Electronic Compass and Outside Temperature Display The NVS Mirror in your vehicle is also equipped with a display the shows the vehicle heading using the 8 basic cardinal headings (N, NE, E, SE, etc.). This NVS Mirror also includes a display of the outside temperature. For more information regarding these features in the NVS mirrors, please refer to the Gentex website – www.gentex.com.
PAGE 3
LED Light Operation The LED lights in the bottom of the mirror provide interior lighting under a variety of different circumstances. In most cases, the LED lights are controlled by the same vehicle control module that operates the other interior lights of the vehicle. However, these LED lights can also be controlled by the operator by simply pressing the button.
PAGE 4
Precautions When programming the HomeLink Universal Transceiver to a garage door opener or entry gate, make sure that people and objects are out of the way to prevent potential harm or damage. Do not use the HomeLink Universal Transceiver with any garage door opener that lacks the safety stop and reverse feature as required by federal safety standards. (This includes any garage door opener model manufactured before April 1, 1982.
PAGE 5
Refer to “Rolling Code Programming” and/or “Canadian Programming/Gate Programming” for additional procedures if necessary.
PAGE 6
To activate the garage door or other programmed device upon successfully completing the steps above, press and hold the HomeLink button - releasing when the device begins to activate. To program the remaining two buttons, follow steps 2 through 4. If you do not successfully program the HomeLink Universal Transceiver to learn the signal of the hand-held transmitter, refer to “Rolling Code Programming” within this text or call toll-free for customer assistance at 1-800355-3515 or on the internet at www.
PAGE 7
www.homelink.jci.com.
PAGE 8
2. Press the “training” button on the garage door opener receiver (which will activate the “training” light). Note: Following step 2, there are 30 seconds in which to initiate step 3. 3. Firmly press and release the programmed HomeLink button. Press and release the HomeLink button a second time to complete the training process. (Some garage door openers may require you to do this procedure a third time to complete the training.