2018-12 GK1500EX Specification sheet 1 of 10 1. Product summary Universal kiosk EX can use the RF card to check the availability of the RF ID reader and then deposit and withdraw money at the user's discretion and request a transaction detail sheet for the transaction.
018-12 GK1500EX Specification sheet 2 of 10 GK1500EX User Manual 1 2 3 4 5 7 8 6 9 10
2018-12 GK1500EX Specification sheet 3 of 10 1. Speaker : Notify by alarm or voice depending on transaction. 2. Display and Touch screen : Touch the screen to make the desired transaction. 3. Card slot : Users can use magnetic, ID and RFID. 4. Earphone : Connect earphone with alarm or voice support. 5. Transaction Receipt Chart exit : It can be received by user selection. 6. Encryption Pin Pad : Used to enter user card password. 7. Barcode : 1D and 2D barcodes are available. 8.
2018-12 GK1500EX Specification sheet 4 of 10
2018-12 GK1500EX Specification sheet 5 of 10 2. RC Unit (CU ) Item Spec. Processors Intel® i5 – 3570 3.4GHz Chipset H61 Memory DDR3-800/1066 SO-DIMM slot up to 16GB Hard Drive Drives SSD 250GB Optical Disk Drive None Graphics Intel HD Graphics 2500 series Audio Codec Realtek ALC662 5.1 Channel Audio Communication 2*Realtek RTL8111EVL PCI-E Gigabit Ethernet Power unit SH-270(270W) (110/ 220 select support) I/O Ports Operating System Serial * 10, Lan *2, USB2.
2018-12 GK1500EX Specification sheet 6 of 10 3. Receipt Printer ( RPU ) Item Spec. Print type Thermal Line Printer Main CPU 32 bit Cortex-M3 Memory 64 X 16 bit SRAM Remarks -5V (1A) for logic circuitry Input Voltage -24V (2A) for driving motor and thermal head Communication RS232(RJ-45) Graphic 200 DPI Monographic printing Dimension 360(W) X 200(H) X 138(T) mm Weight 2.75kg -Feeding Method: friction -Feeding Speed: Max 150mm/s Feeding (Normal 100mm/s, Low 50mm/s) -Feeding Pitch: 0.
2018-12 GK1500EX Specification sheet 7 of 10 4. Cash Dispenser ( CDU ) Item Spec. Type Presenter Type Maintenance Front Service Type Cassette Capacity Max. 2,000 notes (New Notes) Number of Cassette 2 Cassettes Reject Capacity Reject Bin: Max.
2018-12 GK1500EX Specification sheet 8 of 10 5. Encryption Pin Pad ( EPP ) Item Spec. Remarks Overall Dimension 7.20(W) X 3.62(D) X 1.22 (H) inch 183 (W) X 92 (D) X 31 (H) mm Weight 1.10lbs 500g (Typ.) Input Voltage +5V DC ±5% Currency 80mA Communication RS-232 (38400bps, 8Bit, Nonparty, BCC check) MAXQ1103 secure CPU Access 256kbytes of nonvolatile SRAM CPU for program and/or data storage Encryption using on chip 64/128/196bits key Self Destruct Input (SDI) Certification PCI3.
2018-12 GK1500EX Specification sheet 9 of 10 6. MS & IC CARD READER ( MCR+RF ) Item Card Format Spec. ISO 7810 ISO 7811(TRACK1,TRACK2,TRACK3) Read Capable MS Standard Hico/Loco CapableF2F Reading Method 4,000,000 Pass Capable CIS Canon MA06Z-X06 NFC Mifare® & ISO-14443A&B,FeliCa,ISO 18092 13.56MHz ISO/IEC 7816 IC EMV2000 ver.4.0 Contact Landing Type FEED SPEED 450mm/sec ± 10% Interface Type RS232C Interface Read Track Width : 1.0 mm MS HEAD TRACK WIDTH Write Track Width : 3.
2018-12 GK1500EX Specification sheet 10 of 10 7. Bill Accepter Item Acceptance rate Spec. 98% or greater Notes – up to 48notes, four ways, face up and down Note Insertion Note dimensions – 62~83mm width 120 ~ 166mm length Transaction speed Approximately three seconds to stack Escrow One note Interfaces method RS232C Cashbox capacity 500/900/1200/2200 Weight Approximate 4Kg.
2018-12 GK1500EX Specification sheet 11 of 10 8. LCD Item Spec. Remarks Screen Size 21.5 Wide TFT LCD Resolution 1920 * 1080 Active area 296.46(W) x 527.
2018-12 GK1500EX Specification sheet 12 of 10 9. Power supply ( PSU : PSU-2100 ) Item Input Spec. Input Voltage 90~264VAC (Free voltage) Frequency 50/60Hz (47Hz ~ 63Hz) Current 2.8A Max.(100VAC) or 1.3A max. (240VAC) Efficiency 85% Over (Input: 110/220VAC, Output: Full load) Inrush current 40A max. (At cold start & 110VAC 60Hz) Total Watt 155.5W (Max) Voltage Output Remarks 5V 12V 24V Min: 0.5A Min: 0.0A Min: 0.0A Max: 3.5A Max: 1.5A Max: 5A Peak: 4.0A Peak:2.
2018-12 GK1500EX Specification sheet 13 of 10 10. Barcode Parameter Dimensions Spec. 26mm(H) * 73mm(L) * 51mm(W) Weight: 77g Iumination LED: 633mm Wavelength Aimer LED: 528mm Image Size 844 * 640 pixels Skew Angle ±65° Pitch Angle ±45° Motion Tolerance Up to 240 inches per second for 13mil UPC Enhanced Steaming Presentation Trigger Symbol Contrast Grade 1.0(20% or greater) Voltage Requirements 4 ~ 5.5 VDC at input connector Current Draw @5VDC Scanning: 450mA, 2.
2018-12 GK1500EX Specification sheet 14 of 10 11. Barcode Item Spec. Dimensions 150mm(H) * 85mm(W) * 145mm(D) Coin Payout Up to 8coins per second. Diameter : 15 to 29.5mm Coin Dimension Range mm Thickness : 1.25 to 3.
2018-12 GK1500EX Specification sheet 15 of 10 12. US local contact information a. Main Tel.: (510) 344-6333 b. Tech. Support Tel: (510) 344-6344 c. Address: Genmega, Inc.