GENIBOT TEST GUIDE FOR CERTIFICATION GB1-ENTGC0219L3 Feb 19, 2020
GENIBOT TEST GUIDE FOR CERTIFICATION Technical Support and Product Information Address: Rm903-2, 9th Fl., HiPlaza Bldg., Jukjeon-ro 7, Giheung-gu, Yongin-si 16897 Korea www.genirobot.com GENIBOT is product and trade name of GENIROBOT Co., Ltd. Other trademarks or trade names of products and company names mentioned herein are: Microsoft Windows, Google Android, Apple iOS, Scratch Foundation and Python Software Foundation. © 2020 GENIROBOT Co., Ltd. All rights reserved.
IMPORTANT WARNING REGARDING USE This device complies with part 15 of the FCC Rules. operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been test and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules.
AT A GLANCE FEATURES OF GENIBOT GB1 Power Source Battery DC Power Adaptor (DC 5V, Current > 1A) Lithium Polymer 3.7V, 1000mAh Connectivity Bluetooth LE 5.
AT A GLANCE BUTTON AND COLOR LED Power Button To turn on GENIBOT press the Power button. To turn off GENIBOT press and hold the Power button for more than two seconds. To start Unplugged coding when coding data set is stored in memory. To advertise Discovery name of GENIBOT while Star robot or a smart device is scanning GENIBOTs.
UNPLUGGED TEST FOR PERIPHERALS 6
TEST1 UNPLUGGED CODING To test Unplugged coding with GENIBOT that the Optical image sensor will automatically detect it and its card name will be notified through the Speaker. GENIBOT can start as simply as make a coding data set. UNPLUGGED CARD 1 TAP Tap Unplugged coding card for programming the robot. Coding data set should be placed between Start and End card. When making coding data set completes GENIBOT will start after 2seconds that last card in data set should be End card.
TEST2 MOTOR To test motor tap on Rest card and then Number 0 card. 1 CHECK SPEAKER, MOTOR AND COLOR LED If you Power on the robot you can hear a short tone generated from speaker and Green will be blinking every 0.5s. The following steps will be sequentially repeated when Power button is pressed. 1. 2. 3. 4. Press Power button and check that the robot move forward and blinking Green. Press Power button and check that the robot move backward and blinking Red.
TEST 3 COLOR LED To change color on LED of the root touch Card Light and then tap Number card that color index is defined as: Red 0, Green 1, Blue 2. Red 0 Green 1 Blue 2 COLOR ON LED 1 SET To change LED color tap Light and Number. Color can be changed in Hue space as Red, Green, Blue.
TEST4 SPEAKER To make Piano chord sound with GENIBO tap Music card to generate Piano sound. Because the Speaker baffle of each GENIBOT will loudly amplify a sound, it will be overlapped or its chord can be easily created.
DEBUGGING PORT Debugging port can be used to test peripherals for development and to download wav zip file for factory mass production. N/A TX RX N/A GND RX TX GND 1 DEBUGGING PORT N/A Its terminal port in details is as left figure and test data for development is shown above.
GENIBOT APPLICATION FOR BLUETOOTH CONNECTION TEST 12
START APPLICATION To start GENIBOT application GENIBOT must be connected to your smart device for Android or iOS. When the Power button of GENIBOT is pressed Discovery name of GENIBOT will be appeared in Bluetooth scan list on screen. After connection you can choose and to start on Home screen.
CONTROLLER JOSTICK CONTROL Tap or drag and hold Joystick icon on the display to control GENIBOT for making a back and forth motion or rotational motion. Select Color to change LED color on GENIBOT.
OPERATION ALERT WARNING ON GENIBOT LOW BATTERY NOTIFICATION Low battery notification appears in a few seconds that Yellow color is blinking 4 times too fast and GENIBOT will be turned off when the battery power gets low as set by its lower limit level. POWER OFF NOTIFICATION AFTER SLEEP TIMEOUT Power off notification appears in a few seconds that White color is blinking 4 times too fast and GENIBOT will be turned off after Sleep timeout 10 minutes.
GENIBOT Test Guide for Certification Document Edition Part Number: GB1-ENTGC0219L3 First Edition, Feb 17, 2020 Further Documentation Additional documentation for your GENIBOT or for the latest documentation, refer to GENIROBOT web site at www.genirobot.
