OPERATING FEATURE 1 DISCRIPTION OF CONTROLS FRONT COVER TOP COVER
1 ANTENNA CONNECTOR 2 EXTERNAL SPEAKER JACK 3 INTERNAL SPEAKER 4 UP KEY 5 DOWN KEY 6 MIC 7 MONITOR KEY 8 MODE KEY 9 SECR KEY 10 T/A KEY 11 HOME KEY 12 SCAN KEY 13 DUAL LED INDICATOR 14 VOLUME SWITCH 15 DISPLAY LCD DISPLAY
FUNCTIONS CTCSS/CDCSS The MT-900 series in the conventional mode will be capable of all 38 TIA/EIA CTCSS tones, plus up to 11 non-standard CTCSS tones. The MT-900 series will be capable of all TIA/EIA CDCSS codes, normal and inverted. Channels The radio will be programmable for up to 32 channels. How the channels are distributed is dependent on Dealer PC Programming. Talk Around Talk around is accomplished via the “T/A” button.
ANI The Automatic Number Identification (ANI) capability shall be done in software and will not require an external option board. The ANI function will be capable of being programmed per each individual conventional System. The ANI DTMF will be up to 16 digits, numbers 0-9 and characters ? , #. The ANI will be programmable to be sent upon PTT or release of PTT. Time-Out Timer The MT-800 series is to have a programmable transmit time out timer.
FCC Information This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC RF Exposure Compliance This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference.