User's Manual

ManualsBrandsGenex Telecom ManualsElectronicsGMRS/FRS UHF Transceiver

MK-1996 Basic Operation 03-02-10

1. General Specification

- Power On/Off Key : Top

- PTT Key : Side [ Tact SW ]

- Monitor Key : Side [ Tact SW ]

- UP Key : Top

- Down Key : Top

- SCAN Key : Top

- CALL Key : Top

- Menu Key : Top

- EXT Mic/Speaker Jack[ 3.5ö ]

2. Function Flow Chart

F CTCSS PWR Hi/Low DW VOX BEEP Tone Ringer Tone(CALL) F

3. LCD Display

1 of 7

Summary of content (7 pages)

PAGE 1
MK-1996 Basic Operation 03-02-10 1. General Specification - Power On/Off Key : Top - PTT Key : Side [ Tact SW ] - Monitor Key : Side [ Tact SW ] - UP Key : Top - Down Key : Top - SCAN Key : Top - CALL Key : Top - Menu Key : Top - EXT Mic/Speaker Jack[ 3.5ö ] 2. Function Flow Chart F CTCSS PWR Hi/Low DW VOX BEEP Tone Ringer Tone(CALL) F 3.
PAGE 2
MK-1996 Basic Operation 03-02-10 4.
PAGE 3
MK-1996 Basic Operation 03-02-10 5. Operating Instruction 1) On/Off & Volume control Switch - Radio ON : Press and hold down the Power[P] button for over 1seconds. All indicators will appear momentarily on the LCD and you will hear short beep sound. - Radio Off : Press and hold down the Power[P] button for over 2seconds until all indicators Disappear on the LCD. - Volume setting : Press up[•£] or down[•¥] button to choose the adjust level that is most Comfortable for you.
PAGE 4
MK-1996 Basic Operation 03-02-10 - Press the PTT button or Function[menu ] button to confirm. - DW icon will appear on the LCD. To stop the dual watch(DW) - Press the "S" Scan button, the unit will stop the dual watch and will return to normal operation and DW icon will disappear from the LCD. - DW icon will disappear from the LCD. 6) VOX (Voice Operated Transmission) This option enables you to have hands-free conversation. You do not have to operate the PTT button each time when you want to transmit.
PAGE 5
MK-1996 Basic Operation 03-02-10 10) Transmitting - Press and hold the PTT button (The "TX" icon bar appears on the LCD) - Speak slowly and clearly - To stop the transmission, release the PTT button - If there are no more receiving signal for 5 seconds, the unit will go into power save 11) Receiving The coding feature reduces the possibility of interference and provides enhanced communication. You can only listen to a call that has correct matching code.
PAGE 6
MK-1996 Basic Operation 03-02-10 To disable the Monitor feature - Press and hold the Monitor[M] button for over two seconds. (The monitor[ ] icon will disappear on the LCD.) 15) Backlight Backlight is used to improve the display visibility in dark condition. To activate the Backlight - Press and hold the Monitor[M] button in a moment. To disable the Backlight - Press and hold the Monitor[M] button in a moment once again.
PAGE 7
GMRS / FRS Frequency Chart Channel 1 2 3 4 5 6 7 8 9 10 11 Frequency (MHz) 462.5625 462.5875 462.6125 462.6375 462.6625 462.6875 462.7125 467.5625 467.5875 467.6125 467.6375 Use Power FRS/GMRS FRS/GMRS FRS/GMRS FRS/GMRS FRS/GMRS FRS/GMRS FRS/GMRS FRS/GMRS FRS/GMRS FRS/GMRS FRS/GMRS High/low High/low High/low High/low High/low High/low High/low Low Low Low Low Channel Frequency Use Power (MHz) 12 467.6625 FRS/GMRS Low 13 467.6875 FRS/GMRS Low 14 467.7125 FRS/GMRS Low 15 462.5500 GMRS High/low 16 462.