User's Manual

ManualsBrandsGenex Telecom ManualsElectronicsGMRS Transceiver

ROGERS LABS, INC. Genex Electronics

4405 W. 259th Terrace MODEL: FRS 300

Louisburg, KS 66053 Test #: 010419

Phone/Fax: (913) 837-3214 Test to: FCC Parts 2 and 95 Page 1 of 2

FRS300Manual.doc 05/18/2001

MK1995 Owners Operator Manual

MK 1995Basic Operation

_____ ___

1. General Specification

- Power On/Off Volume

- PTT Key : Side [ Tact SW ]

- Monitor Key : Side [ Tact SW ]

- UP Key : Top

- Down Key : Top

- SCAN Key : Top

- CALL Key : Top

- Function Key : Top

- EXT Mic/Charge Jack[ 2.5φ ]

- EXT Speaker Jack[ 3.5φ ]

2. Function Flow Chart

→ CTCSS → PWR Hi/Low → DW → VOX → BEEP → Roger Beep → Ringer Tone→ Vibration

3. LCD Display

Summary of content (5 pages)

PAGE 1
MK1995 Owners Operator Manual MK 1995Basic Operation _____ ___ 1. General Specification - Power On/Off Volume - PTT Key : Side [ Tact SW ] - Monitor Key : Side [ Tact SW ] - UP Key : Top - Down Key : Top - SCAN Key : Top - CALL Key : Top - Function Key : Top - EXT Mic/Charge Jack[ 2.5φ ] - EXT Speaker Jack[ 3.5φ ] 2. Function Flow Chart → CTCSS → PWR Hi/Low → DW → VOX → BEEP → Roger Beep → Ringer Tone→ Vibration 3. LCD Display ROGERS LABS, INC. 4405 W.
PAGE 2
4. Front, Side, Top Overview 5. Operating Instruction 1) On/Off & Volume control Switch - Radio ON : Rotate the switch clockwise until you here a 'click'. All indicators will appear momentarily on the LCD and you will hear short beep sound. - Radio Off : Rotate the switch counter clockwise until all indicators disappear on the LCD. - Volume setting : Rotate On/Off Volume switch to mid position or adjust level that is most comfortable for you. 2) Setting the Channel MK 1995 has 15 main channels.
PAGE 3
) Setting the Tone Code(CTCSS) MK 1995 has 38 CTCSS Codes To set the Tone Codes(CTCSS) - Press Function[F] button once more,[XX oF up to 38] will appear and tone code digit will blink on the LCD. " oF " means no CTCSS code. - Press up[ ↑ ] or down[ ↓ ] button to choose the desired sub-channel to use. - Press the PTT button or Function[F] button to confirm. 4) Setting the Transmit Power HI/LO - HI : 1.
PAGE 4
To activate or disable the Roger tone - Press the Function [F] button until [rb on or oF] and the Roger [ ] icon blink on the LCD. - Press the up[ ↑ ] button or down [ ↓ ] button. - Press the PTT button or Function [F] button to confirm. 9) Setting the Ringer - This feature provides 3 user selectable call ringer signal and vibration. To set your favorite call ringer signal. - Press the Function [F] button until the [ CA 1 or up to 3 ] appears on the LCD.
PAGE 5
To disable the Monitor feature - Press and hold the Monitor[M] button for over two seconds. (The monitor[ ] icon will disappear on the LCD.) 16) Backlight Backlight is used to improve the display visibility in dark condition. To activate the Backlight - Press and hold the Monitor[M] button in a moment. To disable the Backlight Press and hold the Monitor[M] button in a moment once again. 17) Keypad Lock The lock function is to avoid the accidental changes to channel with other radio settings.