PROGRAMMING MANUAL FOR THE GX Series Radios
CONTENTS 1. Program Install 2. Construction of GX Series PC Program • Menu Bar, Tool Bar • Model Select • Data Frame Select • Port select • Program • Splash window 3. System Data Frame • Max Channel Number • Tx Delay • Vox Level Select • Scan • TOT (Time Out Timer) 4. Channel Data Frame • Rx Freq • R-Tone • 2Tone • BCL • BCLO • P-SC • SC • Tx Freq • T-Tone • PW • CS • Scr 5.
1. Program Install 1) Insert the Instruction CD into the CD-ROM drive. The following screen appears inserting the CD. 2) Select the following to Install.
3) If a “Replace file” message appears, click check box and click “Yes”. < Picture 1-3 > 4) Click OK button in condition of checked Run application check box .
) Click Start button in windows, GX8090 automatically create in Program Menu .
2. Construction of GX Series PC Programmer ♦ Menu Bar, Tool Bar, Model Select, Frame Select, Port Select, Program Button ♦ System Data Frame ♦ Channel Data Frame ♦ Two Tone Data Frame 1) Menu Bar, Tool Bar : Processing file and Printing Function • It can be set up to initial value from selected all mode value. • It can be open data file ***.dat form. • Save data to ***.dat form. • Print data from indicated form. 2) Model Select : Function of selecting Model.
1. Read : Click READ button, it can be read the data from SET. Term: 1> SET is turn means that press Monitor key and Scan key simultaneously. And then LED lights of SET will be turned to orange color. 2> Programmer cable connect between PC and Set. 3> Press READ button. 4> Error message will show as it below either cable does not connect or does not set PC link mode. 5> When job is done, it shows as it below and disappear.. 2. Write : You can write the data when you click the button.
5> If you click “Yes”, write window will be start. 4> When write to set is done, it will show window as it below.
6) Splash Window : It shows PC program information.
♦ System Data Frame 1) Max Channel Number 2) Tx Delay : End of TX, it protect squelch tail which come out turn off Tone or Code. 3) Vox Level Select : You can select voice function(on/off) for hands free and level.
4) Scan : Automatic scan receiving channel. • Scan Enable : Scan Enable/Disable • Scan Speed : Delay time for No busy channel. Setting 10msec between 50msec ~ 500msec. (Default : 100 msec) • Scan Delay : Delay time of Busy channel. You can set 1sec delay between 1sec to 30sec. (Default : 5sec) • Priority Scan Enable : Priority Scan Enable/Disable • Prio. Scan Ch. No. : Priority Channel • Look Back time : Interval time for checking Priority channel when Non Priority Channel is busy. (0.
• TOT Enable : TOT function (On/Off) • TX Time-Out time : Set between 10sec to 990sec. • TOT Penalty Enable : When TX, if TOT time is exceed, it prohibit(stop) to TX within penalty time.(on/off) Set between 1sec to 100sec.
♦ Channel Data Frame 1) Rx Freq : It can be select receiving frequency. • When you double click or press enter key, it can be state of insert as follows. • If you click other cell and press return key or navigation key with mouse, it automatically check and input data. 2) R-Tone : It is selected CTCSS , DCS, IDCS Tone in state of receiving. • When you double click or press enter key, it comes tone selecting window as follows.
3) 2Tone : Selecting Two Tone • When you double click or press enter key, it comes two tone window. • It is indicated on Cell, when you check tone which you choose, it shows selected tone. • It can be closed to click button. 4) BCL : It is the option for inhibit transmit when occupied channel is busy. • It can be select to double click or press enter key. The state of On is indicated yellow color. 5) BCLO : It is • It can be On in BCL On.
11) CS : It can be set Channel space. ( N/S band control ) 12) Scr : It can be set Scrambler Option. • when you double click or press enter key, it comes scramble channel window. • when you choose scramble channel, it shows chose channel at the cell and it turns yellow lights on. • It can be closed to double click scramble channel or click button.
♦ Two Tone Data Frame • Two tone use of personal call or group call. • For use of each Tone, it can be selected each Tone from channel data. 1) Super Group Tone • Tone 1 Freq. (Hz) : It is Tone 1 Frequency and it can be set from 300Hz to 3KHz. • Freq Margin : It is set margin of Tone 1 Frequency from 0.5% to 10%. (basic value : 1.5%) • Tone 1 Duration : It is mean time of Tone 1 and it can be set from 100msec to 10000msec. It can be set unit of 10msec.
• Freq Margin : It is set margin of Tone 1 Frequency from 0.5% to 10%. (basic value : 1.5%) • Tone 1 Duration : It is mean time of Tone 1 and it can be set from 100msec to 10000msec. It can be set unit of 10msec. • Gap Time : It is set time from Tone 1 to Tone 2. It can be set 0 or from 200msec to 10000msec. • Tone 2 Disable : It can be On/Off set of Tone 2. • Tone 2 Freq. (Hz) : It is Tone 2 Frequency and it can be set from 300Hz to 3KHz.
