Instructions / Assembly

ManualsBrandsGeneral International ManualsDrill Presses70 in. Drill Press with Electronic Variable Speed

17” ELECTRONIC VARIABLE SPEED DRILL PRESS

75-700 M1

,'(17,),&$7,212)0$,13$576$1'&20321(176

5,*+76,'( VIEW

ELECTRONIC INVERTER

DEPTH STOP

LASER POINTER

TABLE LOCK HANDLE

CHUCK

PULLEY CASE COVER

DIGITAL SPEED DISPLAY

VARIABLE SPEED CONTROLLER

START BUTTON

STOP BUTTON

CHUCK GUARD

TABLE

COLUMN

BASE

COLUMN FLANGE

RACK

TABLE HEIGHT ADJUSTMENT HANDLE

DOWNFEED HANDLES

MOTOR

BELT TENSION ADJUST LEVER

PULLEY CASE COVER SCREW

/()76,'(VIEW

Summary of content (5 pages)

PAGE 1
7” ELECTRONIC VARIABLE SPEED DRILL PRESS 75-700 M1 ,'(17,),&$7,21 2) 0$,1 3$576 $1' &20321(176 5,*+7 6,'( VIEW PULLEY CASE COVER DIGITAL SPEED DISPLAY VARIABLE SPEED CONTROLLER START BUTTON STOP BUTTON CHUCK GUARD TABLE COLUMN BASE COLUMN FLANGE RACK TABLE HEIGHT ADJUSTMENT HANDLE DOWNFEED HANDLES MOTOR BELT TENSION ADJUST LEVER PULLEY CASE COVER SCREW /()7 6,'( VIEW ELECTRONIC INVERTER DEPTH STOP LASER POINTER TABLE LOCK HANDLE CHUCK 7
PAGE 2
BASIC FUNCTIONS This model 75-700 electronic variable speed drill press is designed for precision drilling applications in both wood and metal. This unit includes all the basic functions and features found on most standard drill presses and offers the user the added benefit of variable speed control. Featuring a front mounted digital spindle speed display the unit is equipped with two speed ranges.
PAGE 3
PLACEMENT WITHIN THE SHOP / ESTABLISHING A SAFETY ZONE PLACEMENT WITHIN THE SHOP This machine should be installed and operated only on a solid, flat and stable floor that is able to support the weight of the sander (275 lbs - 125 kg) and the operator. Using the dimensions shown as a guideline, plan for placement within your shop that will allow the operator to work unencumbered and unobstructed by foot traffic (either passing shop visitors or other shop workers) or other tools or machinery.
PAGE 4
INSTALL THE TABLE FIT THE COLUMN RING ONTO THE RACK Insert and hold the rack in the notch in the table bracket and slide the bracket and rack onto the column until the rack bottoms out on the rack seat and fasten two set screws by Allen key. Slide the ring onto the column with the beveled edge facing down to secure the rack to the column. Re-tighten the screw . Note: Do not over-tighten the screw. Note: Position the rack with more teeth towards the bottom .
PAGE 5
,167$// 7+( &+8&. *8$5' REAR VIEW Fit the chuck guard onto the quill and tighten the Phillips screw to secure the chuck guard in place. $'-867,1* $1' 86,1* 7+( &+8&. *8$5' 1. Loosen the wing nuts on both sides of the chuck guard and slide the chuck guard extension down along the two slots to the desired height . 2. Tighten the wing nuts to lock the chuck guard extension in place.