User's Manual

ManualsBrandsGeneral Infinity ManualsAudio EquipmentBluetooth Stereo Headset

BHC-2620 QIG

Bluetooth™ Stereo Headset

BHC-2620 is a headset that supports

wireless music streaming with SBC

and apt-X codec. By connecting the

headset to the PC via a Bluetooth

USB audio dongle, the user can

listen to music in streaming mode.

Also, the user can listen to music by

connecting the headset to the MP3

via a Bluetooth audio adapter. The sports design of the headset with its light

headband allow user to enjoy sheer and unsurpassed comfort. It is perfect for

travel entertainment or as an add-on for your home entertainment system.

People can switch to mobile phone automatic or manually when there is an

incoming call headset connect with your cellular phone(with Bluetooth™

function) give you a safety way to none stop communication in driving.

The BHC-2620 build in NFC function easy connect to mobile phone with NFC

function.

1 Headset Features

Summary of content (6 pages)

PAGE 1
BHC-2620 QIG Bluetooth™ Stereo Headset BHC-2620 is a headset that supports wireless music streaming with SBC and apt-X codec. By connecting the headset to the PC via a Bluetooth USB audio dongle, the user can listen to music in streaming mode. Also, the user can listen to music by connecting the headset to the MP3 via a Bluetooth audio adapter. The sports design of the headset with its light headband allow user to enjoy sheer and unsurpassed comfort.
PAGE 2
Function Keys Location Keys Function Volume up Volume up function Volume down Volume down function Forward button Play next song for AVRCP function Backward button Play previous song for AVRCP function MFB button Power on / off / call function LED indicators Color Blue LED Status Status LED lights up steady Status LED flashes Status LED and Charging LED Function Standby(no connection ) Linked Pairing state Flash alternative Red Charging LED flashes slowly Low battery Charging LED lights u
PAGE 3
4 Pairing device with your headset Pairing headset to your Bluetooth™ mobile phone or other Bluetooth™ devices for the first time only. The headset will remember paired device, so you don’t need pair it every time. To put headset into pairing mode, press and hold the MFB button for six seconds to wait for the Blue and red led flash alternative that indicates the headset is into the paring mode. Operate your Bluetooth™ mobile phone or other Bluetooth™ device to start Bluetooth™ function.
PAGE 4
6 Working in headset mode When your headset connect a device like cellular phone or a Bluetooth USB dongle working with Bluetooth PC stack. Your headset can working in headset mode. Working in headset mode, your headset can using 8 KHz channel to transmit and receive voice data? You can use it as a Bluetooth mono headset to talk phone call wirelessly. You also can connect PC with a USB dongle running skype or massager talking with your headset.
PAGE 5
8 Troubleshooting If the Bluetooth Headset does not work, try the following: -Ensure connecting devices are charged -Turn off all devices and then turn them on in order to shown in this guide -Ensure devices are within 10 meter range -Ensure the Headset is connected by check the blue LED flash Note 1: Some A2DP source like 3.5mm interface transmitter cannot support AVRCP profile, so it cannot do remote control function.
PAGE 6
●Reorient of relocate the receiving antenna. ●Increase the separation between the equipment and receiver. ●Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ●Consult the dealer or an experienced radio/TV technician for help. THE CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. This device complies with Part 15 of the FCC Rules.