802.11g Wireless LAN SiP Module (WM-BG-MR -01) Data Sheet Apr 14th. 2006 Rev 2.5 www.usi.com.tw Data Sheet of 802.11g WM-BG-MR -01 B2B Wireless Lan +BT Combo Module All rights are reserved by USI. No part of this technical document can be reproduced in any form without permission of USI 1 .
802.11g Wireless LAN+BT SiP combo Module V2.2 Introduction The 802.11 Wireless SiP module WM-BG-MR-01 which refers as “SiP-g combo module” is a small size module that provides full function of 802.11g/b and Bluetooth class 2 on a tiny module via 60 pins board to board connector. This multi- functionality and board to board physical interface provides 16 bit PC Card /CF+ bus interface for WiFi and UART for Bluetooth.
802.11g Wireless LAN+BT SiP combo Module V2.2 Change Sheet Rev. Date Description of change Approval & Date Page Par Change(s) 1.0 10/1/04 All All Draft version for Review 2.0 04/11/05 6,15, 1. Executive summary for target available 17,22 date from “the middle of 1Q 2005” to ,23, “ the end of 2Q” 25~2 2. Output power for 11g is 13 +/- 1dBm 7 3. Update the mech. Drawing . 4. Modify the function description for Marvell Transceiver from ”8010” to “8015” 5.
802.11g Wireless LAN+BT SiP combo Module V2.2 TABLE OF CONTENTS 1. EXECUTIVE SUMMARY................................................................................................................ 6 2. DELIVERABLES ............................................................................................................................. 6 3. REFERENCE DOCUMENTS......................................................................................................... 7 4. TECHNICAL SPECIFICATION .....
802.11g Wireless LAN+BT SiP combo Module V2.2 9.2.3. BLUETOOTH INTERFACE .............................................................................................. 28 9.3. SOFTWARE.............................................................................................................................. 28 10. DESIGN FOR EXCELLENCE (DFX)...................................................................................... 28 10.1. 10.2. TESTABILITY .................................................
802.11g Wireless LAN+BT SiP combo Module V2.2 1. EXECUTIVE SUMMARY The WM-BG-MR-01 module - is one of the product families in USI’s product offering, targeting for system integration requiring a smaller form factor. It also provides the standard migration to high data rate to USI’s current SIP customers. The WM-BG-MR-01 module providing B to B type connector is provided as option for customers, who want to have Board to board type assembly.
802.11g Wireless LAN+BT SiP combo Module V2.2 3. REFERENCE DOCUMENTS C.I.S.P.R. Pub. 22 "Limits and methods of measurement of radio interference characteristics of information technology equipment." International Special Committee on Radio Interference (C.I.S.P.R.), Third Edition, 1997. CB Bulletin No. 96A "Adherence to IEC Standards: “Requirements for IEC 950, 2nd Edition and Amendments 1 (1991), 2(1993), 3 (1995) and 4(1996). Product Categories: Meas, Med, Off, Tron.
02.11g Wireless LAN+BT SiP combo Module V2.2 4. TECHNICAL SPECIFICATION The WM-BG-MR-01 is a B2B type assembly part, technical supporting, package requirement needs to be taken into consideration. 4.1. ABSOLUTE MAXIMUM RATING Supply Power Non Operating Temperature Voltage ripple Max +3.6 Volt - 40° to 85° Celsius +/- 2% Max. Values not exceeding Operating voltage 4.2. RECOMMENDABLE OPERATION CONDITION 4.2.1.
802.11g Wireless LAN+BT SiP combo Module V2.2 Current Transmit Receive Deep Sleep 50 mA 40 mA 100 uA Typical Typical Max 4.3. COMPACTFLASH SPECIFICATION 4.3.1. DC ELECTRICALS The DC specification is under 3.3 voltage. Over full range of values specified in the “Recommended Operation Condition” unless specified. Power supply : VDD=3.3V Symbol Parameter Input high voltage VIH Input low voltage VIL Output high voltage VOH Output low voltage VOL Condition Min Typ Max 0.5 VDD -0.5 2.4 - - VDD+0.5 0.
802.11g Wireless LAN+BT SiP combo Module V2.2 4.3.3. COMPACTFLASH PROTOCAL TIMING 4.3.3.1. RESET SPECIFICATION All rights are reserved by USI. No part of this technical document can be reproduced in any form without permission of USI 10 .
802.11g Wireless LAN+BT SiP combo Module V2.2 4.3.3.2. ATTRIBUTE MEMORY READ/WRITE TIMING SPECIFICATION All rights are reserved by USI. No part of this technical document can be reproduced in any form without permission of USI 11 .
802.11g Wireless LAN+BT SiP combo Module V2.2 All rights are reserved by USI. No part of this technical document can be reproduced in any form without permission of USI 12 .
802.11g Wireless LAN+BT SiP combo Module V2.2 4.3.3.3. I/O READ/WRITE TIMING SPECIFICATION All rights are reserved by USI. No part of this technical document can be reproduced in any form without permission of USI 13 .
802.11g Wireless LAN+BT SiP combo Module V2.2 4.4. WIRELESS SPECIFICATIONS The WM-BG-MR-01 module comply with the following features and standards; All rights are reserved by USI. No part of this technical document can be reproduced in any form without permission of USI 14 .
802.11g Wireless LAN+BT SiP combo Module V2.2 Features WLAN Standards Bluetooth Antenna Connector Coexistence Frequency Band Description IEEE 802 Part 11b/g (802.11b/g) BluetoothTM 1.1 and 1.2 compliance Two antenna connectors support 802.11b/g and BT one for each. Hardware signaling 2.400 – 2.484 GHz 4.5. RADIO SPECIFICATIONS 802.11G Features Frequency Band Number of selectable channels Modulation Description 2.4000 – 2.497 GHz (2.
802.11g Wireless LAN+BT SiP combo Module V2.2 Modulation Antenna Connector FHSS (Frequency Hopping Spread Spectrum) , GFSK One Hirose W.FL –R –SMT(10) RF connector 4.7. BLUETOOTH RADIO CHARACTERISTICS Features Description Maximum Receive Level 3 dBm ( Typical ) Output Power 1 dBm ( Typical ) Sensitivity -81 dbm @ 0.1% BER @ 25 ° Celsius ( Typical ) All rights are reserved by USI. No part of this technical document can be reproduced in any form without permission of USI 16 .
802.11g Wireless LAN+BT SiP combo Module V2.2 4.8. DIMENSIONS, WEIGHT AND MOUNTING The following paragraphs provide the requirements for the size, weight and mounting of the WM-BG-MR-01 module. 4.8.1. DIMENSIONS The size and thickness of the WM-BG-MR-01 module is listed below: Antenna connector for WiFi Antenna connector for BT The height – will be finalized after the module design is frozen. 4.8.2. WEIGHT Weight shall not exceed 10 gram including the shielding. 4.8.3.
802.11g Wireless LAN+BT SiP combo Module V2.2 Vibration Operating Non-Operational Shock Operational Non-Operational Frequency sweep from 3-150-3 Hz with a constant 0.25 G input Frequency sweep from 3-150-3 Hz with a constant 0.5 G input 25 G peak within 3.75 msec in normal base position 65 G peak in 3.75 msec in normal base position. 30 G within 8 msec square or trapezoidal shock in + and direction along the 3 axis. (Total 6 shocks) Note: Above tests are executed without packaging material. 5.
802.11g Wireless LAN+BT SiP combo Module V2.2 5.2 BLUETOOTH KEY FEATURES OF THE HCI STACK 5.2.1 NEW BLUETOOTH V1.2 MANDATORY FUNCTIONALITY z Adaptive Frequency Hopping (AFH) z Faster Connections z Flow and Flush Timeout z LMP Improvements z Parameter Ranges 5.2.2 OPTIONAL V1.2 FUNCTIONALITY SUPPORTED z Extended SCO (eSCO), eV3+CRC,eV4,eV5. z Scatter mode z LMP Absence Masks, Quality of service and SCO handle z L2CAP flow and error control z Synchronisation 5.2.
802.11g Wireless LAN+BT SiP combo Module V2.2 7. OPERATING SYSTEM COMPATIBILITY Drivers are supported for the following OS: Windows CE 3.0 /4.2/5.0, PPC2003, 2004, 2005 Linux. 8. LEGAL, REGULATORY & OTHER TECHNICAL CONSTRAINTS The WM-BG-MR-01 module is pre-tested to ensure that all requirements met as set forth in the following sections. Final certification (module certification) requires the antenna of targeted system with a leadtime of 6 weeks.
802.11g Wireless LAN+BT SiP combo Module V2.2 PRINTED WIRING BOARDS: The printed wiring boards shall be Underwriters Laboratories Inc. "Recognized Component" (ZPMV2) under the category for Printed Wiring Boards, and shall be flammability rated 94V-1 or less flammable. The board material shall be rated 130°C minimum. CONNECTORS: Any connectors, if used, shall be Underwriters Laboratories, Inc. "Recognized" (ECBT2/RTRT2) in accordance with the requirements in the UL Standard for Safety, UL 498.
802.11g Wireless LAN+BT SiP combo Module V2.2 8.5.
802.11g Wireless LAN+BT SiP combo Module V2.2 9. FUNCTIONAL DESCRIPTION The WM-BG-MR-01 module provides and interfaces between Compaq Flash or PC Card Interface, SDIO , SPI which suitable for wide range high-end processors or low cost ARM7 or other similar type of processors. The core of the WM-BG-MR-01 module is the Marvell 88W83 Chipset solution.
802.11g Wireless LAN+BT SiP combo Module V2.2 Power GND 9.2. HOST INTERFACE The host interface will be compatible with CompactFlash (PCMCIA) standard, 16 bit I/O bus. Signals which are not used won’t be routed to the physical interface (connector). The host interface of Combo SiP Bluetooth portion is compliant with UART interface, the default baud rate setting is 115.2kbps and the optional range is from 9.6kbps to 921.6kbps. On Board connector Molex 53794-0608 or 55560-0607 Datasheet_Molex_53 794-0608.
802.11g Wireless LAN+BT SiP combo Module V2.2 5 6 7 D06 D07 -CE_1 HD6 HD7 HCE1_B CompactFlash Data bit[6] IO, PU, 4mA CompactFlash Data bit[7] IO, PU, 4mA Card Enable1 is driven by the host Input, PU system and is used as select strobe in both I/O and memory mode. Enables even numbered address bytes. HA10 CompactFlash Address bit [10]. See Input, PU address bit [0] description. HOE_B OUTPUT ENABLE is driven by the host Input, PU during a memory Read Access.
802.11g Wireless LAN+BT SiP combo Module V2.2 30 GND GND 31 GND GND 32 D10 HD10 CompactFlash Data bit[10] 33 34 35 D09 D08 -STSCHG CompactFlash Data bit[9] CompactFlash Data bit[8] Card status changed 36 -SPKR HD9 HD8 HSTSCHG _B PCM_Sync 37 -REG HREG_B Register select and I/O enable 38 -INPACK 39 -WAIT 40 RESET 41 N/A 42 N/A 43 N/A HINPACK_ INPUT ACKNOWLEDGE is driven by WM- Output, 2mA B BG-MR-01.
802.11g Wireless LAN+BT SiP combo Module V2.2 50 51 52 53 54 55 D15 D14 D13 D12 D11 N/A HD15 HD14 HD13 HD12 HD11 BT_LED_B 56 N/A RXD_B 57 N/A CTS_B 58 N/A SD_DAT0 PCM_CLK 59 N/A VCC_BT 60 GND CompactFlash Data bit[15] CompactFlash Data bit[14] CompactFlash Data bit[13] CompactFlash Data bit[12] CompactFlash Data bit[11] BT LED control signal which drives the LED to indicate the activity of Bluetooth. Active low.
802.11g Wireless LAN+BT SiP combo Module V2.2 42 WLAN_LED 55 BT_LED_B Check firmware specification of GPIO(1) with Marvell Link activity of Bluetooth 9.2.2. ANTENNA INTERFACE No antenna diversity supported on the Wireless Module. The output impedance of the cable is 50 Ohms. Antenna Connector: Hirose W-FL-R-SMT(10) 9.2.3. BLUETOOTH INTERFACE There are interfaces signal to routed between WiFi and Bluetooth to provide coexistence with 802.15 Bluetooth modules.
802.11g Wireless LAN+BT SiP combo Module V2.2 y No additional test pins are required to support in-circuit testing. 10.2. LOGISTICS All customer specific requirements – customization – will be implemented at the highest possible level to support build to order and keep the number of modules in SMT to a minimum. Additional module variants might be added base on business potential. 11. HUMAN FACTORS Due to the nature of this product (embedded module) no human factors required 12.
802.11g Wireless LAN+BT SiP combo Module V2.2 Marvell is Trademark of 3’rd Party. For Additional information, please contact the following: Universal Scientific Industrial Co., Ltd. Headquarters 141, Lane 351, Taiping Road, Sec. 1, Tsao-Tuen, Taiwan, Http://www.usi.com.tw Tel: + 886-49-2350876, 2325876 Fax: +886-49-3439561, 2337360,2351093 E-mail:usi@ms.usi.com.tw All rights are reserved by USI. No part of this technical document can be reproduced in any form without permission of USI 30 .