Wireless Broadband Modem Type PEM-Outdoor (ODU) Power over Ethernet (PoE) Quick Start Guide -1-
Important Notes: 1. Complete the IPWireless Connection Software installation from the CD before you attach the PEM-ODU modem to the computer’s Ethernet port. The installation software will tell you when you should connect the modem to the Ethernet port. 2. This product is compatible with Windows versions 2000 and XP only. Safety Guidelines for the Outdoor Modem Do not attempt to disassemble the Outdoor Modem; doing so may expose you to unsafe conditions.
Getting Started Regulatory Information This Quick Start Guide gives basic installation and configuration instructions. Follow the instructions on the following pages to install the PEM-ODU Modem connection software and driver files, before connecting the modem to the computer and then performing on-line registration. North America and Canada Be sure to complete each of the following steps outlined below before moving on to the next step.
Step 3. Find the Best Radio Signal and Support the Modem with the Stand supplied The Outdoor modem will have been aligned for best signal during installation Step 4. Connect the Ethernet cable Connect the Ethernet cable into the PC Interface Cable port located on the side of the modem. Step 5. Perform On-line Registration To start the On-line registration process, again click Next> which will result in the Wireless Broadband Status Monitor program automatically starting.