Configuring the DORMER Residential Gateway Configuring the DOR2210 Residential Gateway 5 Select the capability that you want to use from the following options: Configuring DSL Settings ® Bit swap Enable ‘To configure the DSL settings for the residential gateway, complete the following W SRA Arable steps. [Apply Hu Hi ton. 1 Click Stent on the main tureen. The Summary screen opens by default. & Click Save/Apply fo save the configuration. 2 Click the Setting tab. The DSL Settings screen opens.
Goa figuring the DDR2200 Residential Gateway DSL Advanced Settings The PSL Advanced Settings screen allows you to select a test mode. Path: Trendsetting Advanced Settings r woe nis PL SPR COe PRN Tea hs Semi con age. orm “run Pita Olin ny Configuring the ODR2200 Residential Gateway Configuring DSL Advanced Settings To configure the DSL advanced settings, complete the following steps. 1 Click DSL on the main screen, The Summary screen opens by devout, 2 Click the Setting tab. The USL Settings screen opens.
1202853 Rac 4 Select the test mode from the following options: 5 Click Apply to configure the advanced settings. ‘Configuring the DDR2200 Residential Gateway Normal Reverb Medley No refrain Ls & ‘Configuring the DORZ200 Residential Gateway Tone Settings The ADS Tore Settings screen allows you lo select active DSL tones or frequencies used by the DSL transceiver.
#302550 Roi A Configuring the BDR2200 Residential Gateway Meting DSL Tones or Frequencies To set DSL tones or frequencies, complete the following steps. 1 Click DSL on the main screen. The Summary screen opens by default, 2 Click the Setting tab, The DSL Settings screen opens. ost Set antivenins # Garroter © naan Patagonia Gene pit ats Bao pent [ere ins nn wi saws © our: B Sweat Fea DS Guadalupe Remiss Bits son mo: ama / Sa Tees beta | Condemnation zig.
‘Configuring the DDRZ200 Residual Gateway ‘Configuring the DDR2200 Residential Gateway . Updating HANNA Clients Cli mammary ent Su To update the HANNA clients, complete the following steps. “The Client Summary screen shows all the client devices attached ta the residential cic gateway. You can click Show HANNA Client fo display the FIONA devices attached to 1 Tome Network on the lams screen. Hie HANNA RF interface of the residential gateway. 2 Click Summary, The Client Summary screen opens.
450265 Rev A. Configuring the DDRZ200 Residential Gateway 4 Click HANNA Update to update the HPA software of HANNA devices attached to [EERIE Si: Qt pd HPA ga Bf 15, Sin Ee th pe dhe neon 2 hole ch “rr” frequencies Sia 3 chr ton Marcelo bauble bs aw vo Ones the Software File Narwhal field, enter the name of the file that you want a tse to update your system. You can click Browse to locate the file. 6 Click Next. The software for the attached HANNA devices is updated.
Configuring the DDR2200 Residential Gateway Configuring the WAN interface (MER Broadband Type) To configure a WAN interface for MAC Encapsulation Routing (MER) broadband type, complete the following steps. T Click Home Network on the main screen. The Client Summary screen opens, In the Broadband type field, enter DSL. 4002550 Roe @ ‘Configuring the DOR2208 Residential Gateway the DSL Mode field, enter ATM, More fields populate on the screen as shown here.
Configuring the BOR2200 Residential Gateway Configuring the WAN interface (POE Broadband Type) To configure a WAN interface with the FPP over Theme (Poe) broadband types, compote the following steps. 1 Click Home Network on the main screen. The Client Summary screen opera, 2 Click WAN Setup. The WAN Quick Setup screen operas. |= PARE nai | 3 In the Broadband type field, enter DSL. ‘Configuring the DOR2200 Residential Gateway 4 « In the DSL Mode field, enter ATM.
Configuring ihe DOR2200 Residential Gateway LAN Setup The Local Area Network (LAN) Setup screen allows users to set up LAN settings such as dynamic host configuration protocol (DHCP), Internet gateway multi-cast protocol (PIGMENT, and universal plug and play (Upon. Path Flo me Network>LAN Setup scientific wr = SP Sen ars TT [SR 0B Rer a ¥ Configuring the DDRZHG Residential Gateway Configuring the LAN Interface “Ta configure the LAN interface, complete the following steps.
‘Configuring the DDR2Z0G Residential Gateway w Do you want to Enable the CPD server? ® If yes, select Enable CPD Server, and go to step 6. B Ing, select Disable CPD Server, and go to step 7. 6 Under Enable CPD server, enter the allowing information; In the Start IP Address, enter the first IF dress in the range fo ® in the End IP Address, enter the last IP address in the range for, Wn the Leased Time (how) field, enter he.
Configuring the DOR2200 Residential Gateway Wireless Basic The Wireless Basic screen shows the basic wireless aces pot (AP) parameters, Path: Home Network>Wireless> Basic NER on Use wan | tectonic TH shop WAS LN Wn You con real Gino undo Bt; sl meh om ci AER: HIE oun omen ih Aap” te ions sn ne Add bi hemp so [EW one [ITH Ego: 3 wearer © A050 Rav A Configuring the DDRZ200 Residential Gateway 2) Wireless Security The Wireless Security screen allows yon to configure security features of the wireless LAN interf
Configuring the DORZ200 Residential Gateway Configuring the DDR2200 Residential Gateway WEP Encryption Disabled Wireless MAC Filter ‘The Wireless — MAC Filter screen allows you set Filter schemes for the wireless access points.
400550 Rev Configuring the DDR220) Residential Gateway Wireless Bridge The Wireless — Bridge screen allows you to configure the wireless caress point as a bridge. Path: Home Network>Wireless> Advanced> Wireless Bridge mans gas EET noes FRE as pas Configuring the DDR2200 Residential Gateway Wireless Station List This page shows the attached clients (also known as associated stations) t the wireless access point (AP) of the residential gateway.
‘Configuring the DDR2200 Residential Gateway 3 Click HANNA Update to to update the HANNA software of HANNA devices attached ta the residential gateway The Update HANNA window opera. (A 95 1:00 Rte fie hang Tp com hc bo cock res” florin rie Sp 31k Wo Bas pn nd cage ste Fie [RR] 2 4 in the Software Tile Name field, enter the name of the fle that you want to use fo update your system. You can click Browse to locate the fle. 5 Click Next. The software for the attached HANNA devices is updated. A502850 Ree A.
40255 Ree Nonagenarian the DDR220P Residential Gateway MAC Filtering Setup The MAC Filtering Setup screen allows you to set up filters for packets containing configured MAC addresses. With the MAC Filtering feature you can restrict access fo certain servers based on their MAC address, MAC Filtering only effective on ATM PVC configured in Bridge mode.
Configuring tha DR2200 Residential Gateway Adding MAC Filtering To add MAC Filtering, complete the following stops. 1 Click Security on the main screen. The Packet Filtering tab opens by default. 2 Click MAC Pilfering, The MAC Filleting screen opens. [rar Cl Ete a SAC conics 6 ced Bor Bk pt.
‘Configuring the BDR2200 Residential Guise ‘Configuring the ODR2208 Residential Gateway 3 Click Change Policy. The Change MAC Filtering Global Policy screen opens. In Forwarding or Blocking MAC Layer Frames this example, the global policy for MAC filtering is "Forwarded.
‘Configuring the BOR2200 Residential Gateway ‘Configuring the DDR2200 Residential Gateway Removing MAC Filtering . P Fitter To remove am Ac filtering rule you have set up, complete the following steps. Incoming | ng pock default, alt incoming TP traffic from the WAN is blocked when the firewall is 1 curie main screen. 'F Filtering; of y . Click Security on the main on. The Packet Filtering tab opens by downfall enabled. However, some IF tragic can be accepted by setting wp filers.
Configuring the DDR2200 Residential Gale way ‘Configuring the DORMER Residential Gateway 3 Click Add. The Add IF Filter Incoming screen opens. Adding an Incoming IP Filter You can create a filter rule to identify incoming IP traffic by specifying a new filter name and at least one condition fur the filter. Al of the specified conditions in this fitter rule must be satisfied for the rule to take effect. To add an incoming IP filter, complete the following steps.
400758) Rav Concurring the ADDRESS Residential Gateway 9 In the Destination IP address field, enter the destination IP address for the server receiving the packets, 10 In the Destination Subset Mask field, enter the subset mask for the server receiving the packets. 11 In the Destination Port field, enter the port number for the server receiving the ‘packets. Use the following format: post or port:part You can enter one port or a range of ports (for example, 0:5 to indicate ports 0 through 5).
4002360 Rev A Configuring the BBR2200 Residential Gateway Outgoing IP Filtering By default, all outgoing IP affix from LAN is allowed, but some IP traffic can be BLOCKED by setting up filters. Path: SECURITY>Cutcoming [P Filtering ir page sens outs | sex Seers or troy HEA omy turgid Sap raf $e LAN cant BLOCH bso pin. 25 ‘Configuring the DDR2200 Residential Gateway ‘Adding an Outgoing IP Filter To add an outgoing IP filter, complete the following steps. 1 Click Security on the main screen.
Configuring the DDRZ200 Residential Gateway ‘Configuring the DDR2200 Residential Gateway 3 Click Add. The Add IF Filter Outgoing screen opens. 11 In the Destination Port field, enter the port number for the server receiving the packets, Use the following format part or port port 12 Click Misapply to add the flier. Scientific Arts 115 can sows yo J ip Who. fr tgs tic.
‘Configuring the DDR2200 Residential Gateway Removing an Outgoing IP Filter To move an outgoing IP filter, complete the following steps. 1 Click Security on the main screen. The MAC Filtering screen opens by default, O00 Sui pe Th page Moms ym ta [cod nas pg | rate. i 4 X gong 1 Sing Set. 97500 ost Bm Bo cm LOGE by win he ut Ba ign 2 L Sue | Sawyer [Unk Adds) Desk re | IE foes ey 3 From the Outgoing IP Filtering screen, lactose Remove in the Remove column next to the filter you wish fo remove.
0550 Res 4 Adding Time of Day Restrictions ‘Configuring the DOR2200 Residential Gateway To add time of day restrictions, complete the fallowing steps. 1 Click Security on the main screen. The MAC Filtering screen opens by default, obis me td 2 Click the Parental Control tab. The Time of Day Restrictions screen opens, a 8 8 Configuring the DORZ200 Residential Gateway wow 3 Click Add. The Time of Day Restriction screen opens. Scientific.
Configuring the DER2200 Residual Gateway Removing Tums of Day Restrictions To remove time of day restrictions, complete the following; steps. 1 Click Security on the main serene. The MAC Filtering screen opens by default. = outgrew BEE ini ni: ar taint torture gen Grant Jaa Ferrari lor [Sn a oe Semi [0 3 From the Time of Day Restrictions screen, select Remove in the Remove column next fo the time of day restriction that you wish to remove, 4 Click Remove to remove the restriction, 20 Rov A .
Configuring the DDRZ20 Residential Gateway Schedule Rules ‘The Schedule Rules screen shows you the current rates set up for the firewall Path; Security>Firewall>Schedule Rules |: Ths pus Shaw steadily. [mse HER A Can figuring the DDRZZ00 Residents Gateway 5 Intrusion Detection The Intrusion Detection screen allows you to configure the settings for detecting intruders to your residential gateway.
A005 Rev A Configuring the DDR2200 Residential Gateway URL Filtering Function ‘The URL Filtering Function screen allows you to configure the features for filtering URLs. Path: Security>Firewall>URL Filter wr Configuring the DORSAL Residential Gateway Local Certificates “Fhe Local Certificates screen allows you to load certificates onto the residential gateway. Local certificates ure used by peers to verify your identity. A maximum of four certificates narc be stored.
Configuring the DDRZ20T Residential Gateway Configuring the DORMER Residential Gateway 3 Click Create Certificate Request. The Create new certificate request screen Creating Correlatives opens. “The Create Certificate Screen allows you to generate a certificate by specifying certificate parameters Shawn in this screen. To create a certificate, complete the following steps. 1 Click Security on the main screen. The MAC Filtering screen opens by default, ere Er CT REE 2 Click Certificate.
Configuring the DDRZ200 Residential Gateway Configuring the DDR2200 Residential Gateway 9 Click Apply to create the certificate. The certificate signing request screen opens. imparting Lora) Certificates ‘The Import Certificate screen allows yon ta import a per-existing certificate to the residential gateway. To import a certificate, complete the Following steps. 1 Chick Security on the main screen.
‘Configuring the DDR2200 Residential Galloway Configuring the DDR220D Residential Gateway 8 Click Import Certificate. The Import certificate screen opens. Trusted CA Certificates ‘The allows you to load certificates onto the residential gateway. You can use CA certificates lo verify perch’ certificates.
‘Configuring the BDR2200 Residents! Gateway 2 Click Certificate. The Local Certificates screen opens. area i 3 Click Trusted CA. The Trusted CA (Certificate Authority) Certificates screen opens. Ryan Thi ago si a oad testosterone to OC An Reese go am Ba, coils a ia Fb voy soe coe. dim Conferees sb iow. ANS Ree Configuring the DORMER) Residential Gateway 4 Click Import Certificate. The Import CA Certificate screen opens.
Configuring ha DRIZZLED Residential Gateway Configuring the DOR2200 Resident Gateway Quality of Services The Quality of Service screen allows you to configure the Quality of Service (QoS) Virtual Servers Setup stings for the residential gateway. The NAT -Virtual Servers Setup screen allows you to configure servers to which you want to forward IP packets that belong to a specific service.
Configuring the DORIAN Residential Gateway Transfiguring the DIR2200 Residential Gateway 4 From the Virtual Servers Setup screen, dick Add. The NAT Virtual Servers. Adding a Virtual Server screen opens. To add and configure a virtual server, complete the following steps. Er onset Vera Serra 1 Click Home Network on the main screen. 2 Click Services. The Network Services screen opens. ore nts mle a di soe NTE moe. Robin umber of sates ha on bo confetti 0m rap "al Par Send or Toad Por End Sarto.
Configuring the DORZ200 Residential Gateway Removing a Virtual Server To remove a virtual server, complete the following steps. 1 Click Home Network on the main screen. 2 Click Services. The Network Services screen opens. ik Scientific om pe) io Ths page shows Asian a sensationalism doll Ee WAT.
Configuring the DDR2260 Residential Gateway Configuring the DDR226D Residential Gateway 4 Prom the NAT Port Triggering screen, click Add. The NAT Port Triggering pwning a Port on the Firewall screen opens with a list of available protocols, To pore a port on the firewall, complete the following steps. 1 Click Home Network on the main screen. 2 Click Services, The Network Services screen opens. Fingering saws uso to habitation pan.
‘Configuring the DOR2260 Residential Stowaway ‘Configuring fhe DAR2300 Residential Gateway Closings Port on the Firewall To case a part on the recall, complete the following steps. 1 Click Home Network on fhe main screen. The NAT ~ DMZ Hast sensor affords the IP packets from the WAN that do not " N . belong to any of the applications configured in the Virtual Servers table to be 2 Click Services. The Network Services screen opens.