Manualshelf

Product Description

ManualsBrandsGemred ManualsElectronicsDigital Bevel Box
12
Table Of Contents
（2）Short press ON/OFF button，“-1-” flashing，keep the device no movement until“-2-” be displayed. As following
picture.
（3）Turn 180°of the device at the same position. As following picture.
（4）Short press ON/OFF button，“-2-” flashing, keep
the device no movement until the device automatically
exit the calibration status, calibration is done.
SOLA Level box
NO.82485
SPECIFICATION
1. PRODUCT OUTLOOK
2. PRODUCT DESCRIPTION
SOLA LEVEL BOX COULD DO LEVEL MEASURING AND
RELATIVE MEASURING, WITH HOLD, FLIP OVER READING,
BACKLIGHT AND SOUNDING FUNCTION. SMALL SIZE, EASY
FOR CARRYING, GOOD FOR MANY APPLICATIONS.
3. PRODUCT FEATURES
3.1 MEASURING UNIT: °, %, mm/m, in/ft
3.2 RESOLUTION:0.05°/ 0.1°（could choose by APP），default is 0.1°
3.3 Accuracy: 0&90°：0.05°；1° to 89°：0.2°
3.4 Measuring range：°：4*90°
3.5 Backlight: When turn on, white backlight is on
3.6 Number changing or any press button will active the backlight. 1min no movement, backlight will automatically shut off.
3.7 Hold function：Short press“HOLD”button at any angle will hold the measurement, symbol “HOLD”will show on the display.
3.8 Relative measuring：customer could set relative 0 at any angle.
3.9 Auto shut off in 3 minutes if no operation or number not move.
3.10 0/45°/90°sounding function: different frequency sounding for closing to 0/45°/90°. When angle close to 0/45°/90°， from 1.55°to
0.8°(1time/second),from 0.75°-0.3°（2times/second），from 0.25°-0.05°（4times/second），0.00°continue sounding.
Different voice at anti-clockwise direction and clockwise direction.
Different sound in situation the right side is not inclined compare in the situation the left side is not inclined”
default – sound is OFF
3.11 Power：DC1.5V(AA×1 )
3.12 Full view LCD
3.13 Flip over display when over 90 degree.
3.14 Battery life: 80 hours(bluetooth on, backlight off),65 hours(bluetooth on, backlight on)（The result is been calculated base on battery capacity is
2500mAH, we will do the real calculation when getting the mass production battery）
3.15 Dropping resistant：All function running okay after 2 meters dropping test.
3.16 Buetooth function：After installing the battery, device will on, bluetooth will on automatically at the same time. When connected, device will continue
sending the current value to the APP. Bluetooth is ON at every time when product is on”
3.17 BLE ID：SOLA_Go!_smart_00500(unique ID on each product, but not continue number). When device be connected in successful, there is no chance
for connect with other ones in the same area.
3.18 APP could show the displayed value, APP could operate the product.
3.19 After connecting one time, cell phone will be automatically be connected later.
3.20 Bluetooth protocol：4.0BLE
? Bluetooth transfer distance： 10meter in barrier free area, other bluetooth device around will not effect this device.
3.21 Warning out of tolerance longitudinally: when measuring near 0°and 90°, if the longitudinal axle ( fore-and-aft direction) inclination exceeds 30°, it will
display “- - - - - -” which means substantial deviation in the measurement and no accurate value can be provided.
3.22 1.1V low voltage warning.(battery sign will keep flashing when reach 1.1V. The product could keep run 2 hours since 1.1V until power off
automatically)
3.23 Default state when installing battery/on：：ABS status，unit °，backlight on，sounding off, bluetooth on. ABS didn’t be shown on the display
4. PRODUCT TECHNIC DATA
4.1 Temperature:
4.1.1 Working temperature ：-10°C (14°F) to 50°C (122°F)
4.1.2 Storage temperature or shipping temperature:： -20°C (-4°F) to 60°C (140°F)
4.2 Working humidity：≤85%
4.3 (EMC)：Class II
4.4 IP level：IP54
4.5 FCC certificate
4.6 REACH, ROHS will be supplied by GEMRED self-declaration
5. PRESS BUTTON OPERATION:
“ON/OFF” Button
At off status, short press to turn on the device.
At on status, press button for 2seconds to turn off the device.
HOLD Button
Short press it to enter/exit the HOLD mode, under HOLD mode, LCD will have symbol “HOLD” be displayed.
Long press(2 seconds) HOLD button to enter the INC mode and set relative ZERO, long press (2 seconds) it again to
return to ABS mode.
MODE Button
Short press it to convert between unit（°, %, mm/m, in/ft）；
Long press (2 seconds) it to turn on/off the sounding function（under sounding function, LCD will have sound symbol be
displayed.）
“ON/OFF” Button + “MODE” Button
Press ON/OFF Button and MODE Button at the same time could enter the mode to choose the resolution 0.1°or 0.05°.
Remarks：Default resolution is 0.1°，next time turn on the device will keep in default setting no matter which resolution
been chosen last time.
Calibration（Calibration already been done at facotry, customer no need to do the calibration before using. If you
want to calibrate again, you could follow the following steps.）
At on status, long press (2 seconds) ON/OFF and HOLD at the same time to enter the calibration.
a、Level calibration
a1、ZERO point calibration
（1）Put the device at a flat surface, at on status, long press(2 seconds) the ON/OFF and HOLD button at the same time
to enter the calibration and “-1-” will be displayed. As following picture.

Summary of content (2 pages)