Installation Instructions

Table Of Contents
E-1
REMOTE INSTRUCTIONS:
1. HOME
2. POWER
3. BACK
4. PLAY/PAUSE
5. SIGNAL SOURCE
6. MUTE
7. INCREASE THE VOLUME
8. DECREASE THE VOLUME
Use OK and DIRECTIONAL ARROWS to select and scroll through setting options.
NOTES:
1. When using the remote to turn ON your set, there may be up to a 2 seconds delay before the light pattern starts working.
2. If for any reason the signal from the remote (transmitter) to the control box (receiver) hangs up, please turn off and then
restart the power to the set.
3. The effective operating distance of the remote is 20’ (6m).
BATTERY CAUTION:
Keep this products battery out of the reach of small children or pets. If ingested, contact a physician immediately.
Always purchase the correct size and grade of battery most suitable for the intended use.
Replace all battery of a set at the same time.
Clean the battery contacts and also those of the device prior to battery installation.
Remove battery from equipment which is not to be used for an extended period of time.
Remove used battery promptly.
When the remote control begins to lose its sensitivity, check the batteries and replace if necessary.
Open the battery compartment and replace battery.
Ensure the battery is installed correctly with regard to polarity (+ and -).

Summary of content (3 pages)