User's Manual

ManualsBrandsGEMMY INDUSTRIES LIMITED BVI ManualsElectronicsAppLights Projection

INSTRUCTIONS

E pg.1

Congratulations! You are now the proud owner

of a LED LIGHTSHOW. Please read the directions carefully before

use.

SAFETY WARNING:

Remove all plastic fasten-

ers and tags. These are part of the packaging and should be dis-

carded.

SAVE THESE INSTRUCTIONS – This

manual contains important safety and operating instructions for

power units.

WARNING

ELECTRIC PRODUCT. Keep away from children. Not recommended for children

under 3 years of age. As with all electrical products, precautions should be observed

during handling and use to reduce the risk of electric shock. If the supply cord is dam-

aged, it must be replaced by the manufacturer, its service agent or similarly qualied

persons in order to avoid a hazard.

WARNING

Strobe lights have been known to trigger seizures in people with photosensitive

epilepsy.

WARNING

The light is very bright. Do not shine directly into eyes.

IMPORTANT SAFETY INSTRUCTIONS

WHEN USING ELECTRICAL PRODUCTS,

BASIC PRECAUTIONS SHOULD ALWAYS

BE FOLLOWED INCLUDING THE FOLOW-

ING: READ ALL INSTRUCTIONS BEFORE

Summary of content (7 pages)

PAGE 1
INSTRUCTIONS E pg.1 Congratulations! You are now the proud owner of a LED LIGHTSHOW. Please read the directions carefully before use. SAFETY WARNING: Remove all plastic fasteners and tags. These are part of the packaging and should be discarded. SAVE THESE INSTRUCTIONS – This manual contains important safety and operating instructions for power units. WARNING ELECTRIC PRODUCT. Keep away from children. Not recommended for children under 3 years of age.
PAGE 2
pg.2 USING(THIS FURNISHING) WARNING: TO REDUCE THE RISK OF BURNS, FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS ： READ AND FOLLOW ALL SAFETY INSTRUCTIONS. 1. Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails. 2. D o not let lamps rest on the supply cord or on any wire. 3. Do not close doors or windows on the product or extension cords as this may damage the wire insulation. 4.
PAGE 3
pg.3 14. Read and follow all instructions that are on the product or provided with the product. CAUTION: To reduce the risk of fire and electric shock: 1. Do not install on trees having needles, leaves or branch coverings of metal or materials which look like metal. 2. Do not mount or support wires in a manner that can cut or damage wire insulation. SAVE THESE INSTRUCTIONS. FEATURES - Plastic housing with 4 pieces high power LEDs. - UL power cord operated. - Easy installation.
PAGE 4
pg.4 4. Plug power cord into standard wall socket. ( illustration 2) 5. Unplug when not in use. illustration 2 USER SERVICING INSTRUCTIONS Fuse Replacement WARNING：R isk of Fire: Replace only with same size and type of fuse. WARNING：Risk of Fire: Do not replace the attach- ment plug. Contains a safety device (fuse) that should not be removed. Discard product if attachment plug is damaged. 1. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on the cord. 2.
PAGE 5
pg.5 OPERATION - Insert the plug into socket. - Set this device as a projector. - Extract the plug if not in use. Be careful with the power cord! WARNING • The device is for indoor and outdoor use! • Suitable for outdoor use! • Please keep away from heaters and other heating sources! IMPORTANT Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not accept liability for any resulting defects or problems.
PAGE 6
WARNING pg.6 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 7
CAUTION 1) For temporary (90 days max.) installation and use only. 2) Toreduce the likelihood of excessive heat and possible damage, use only decorative lamp accessories packaged with this product. 3) To reduce the risk of fire or electric shock, do not attempt to replace lamps or modify product. 4) This is an electric product-not a toy! To avoid risk of fire, burns, personal injury and electric shock it should not be played with or placed where small children can reach it.