HD Sound Bar with Bluetooth Wireless User’s Guide for Model ITB105B v1204-01 For the most of this User’s Guide, go to www.iLiveElectronics.
Safety Instructions & Warnings CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE D' ÉLECTROCUTION NE PAS OUVRIR WARNING: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Safety Instructions & Warnings Additional Warnings and Precautions • CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. AVIS: AFIN DE PRÉVENIR LES CHOCS ÉLÉCTRIQUES, FAITES CORRESPONDRE LA FICHE BLANCHE DE LA PRISE À LA FENTE LARGE, INSÉREZ TOTALEMENT. • WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain, moisture, dripping, or splashing.
Table of Contents Unboxing Your HD Soundbar �����������������������������������������������������������������������������������������������������������������������������������������������������������5 Features & Specifications Includes Setup ���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������5 Power Remote Battery Orientation ������������������������������
Unboxing Your HD Soundbar Features & Specifications • 19.5" length • Supports Bluetooth v2.1 Includes • Remote control: requires a CR2025 battery (pre-installed) • Supports Enhanced Data Rate (EDR) • RCA to 3.5mm line in • Supports profile A2DP (Advanced Audio • RCA to 3.5mm (female) cable Distribution Profile) • Wireless range: 60 feet • AC/DC power adapter • Wall-mount hardware and instructions • Digital volume control • Full-function remote • Optical digital audio input • 3.
Orientation Speaker Rear Inputs Stereo RCA Audio Inputs (AUX IN) Optical Input DC Power Input Speaker Controls (Left Side) Power Press to power the unit on or off. Source Press to switch between Optical, Line In, AUX, and Bluetooth modes. Volume Press to adjust the volume up or down. Pair Press and hold to begin pairing to a Bluetooth device.
Remote Layout Power Press to turn the unit on or off. Mute Press to mute the volume. Press to switch to Bluetooth Mode. Music Press to switch to the EQ optimized for music. Line In Press to switch to Line In mode. Movie Press to switch to the EQ optimized for movie sound. Optical Press to switch to Optical mode. AUX Press to switch to Aux In mode. Dialog Press to switch to the EQ optimized for dialog. Treble Press to adjust the treble up or down.
Audio Inputs Using the Stereo RCA Inputs to Connect to a Computer When connecting two products using an RCA Cable, match the colored ports on the unit (red/white) with the same colored connection on the cables. 1. Connect the Male 3.5mm to RCA Cable (included) to the 3.5mm Audio Input on the computer, and the Aux In (RCA) Stereo Inputs located on the back of the soundbar. 2. Press the Power button to power on the unit. 3. Press the Source button repeatedly to enter AUX Mode, indicated by a white light.
Using the Stereo RCA Inputs to Connect to a Computer - Rear View Using the Stereo RCA Inputs to Connect to a Television or Other Device - Rear View MALE FEMALE Using the Optical Input - Rear View Customer Support: 1-888-999-4215 9
Audio Inputs Using the Line In 3.5 mm audio input cable not included. 1. Plug one end of a 3.5 mm audio input cable into the Line In on the unit and plug the other end of the cable into the audio output/headphone output on an MP3 Player or other audio source. 2. Press the Power button to power the unit on. 3. Press the Source button repeatedly to enter Line In Mode, indicated by a green light. 4. Audio played through the connected device will now be heard through the speakers.
Bluetooth Pairing a Bluetooth Device for the First Time 1. Power on the unit by pressing the Power button. 2. button on the remote to switch to Bluetooth Mode, indicated by a slowly flashing blue light. Press the You can also press the Source button on the side of the unit. 3. Press and hold the Pair button on the side of the unit. The pairing indicator will flash blue quickly. When pairing, remain within 3 feet of the unit. 4.
Company Information Contact Information Website: www.iLiveElectronics.com Email Support: prodinfo@dpiinc.com Email Parts: partsinfo@dpiinc.com Phone Support: 1-888-999-4215 Warranty For Warranty Information and the most of this User’s Guide, go to: www.iLiveElectronics.com International Support To download this User’s Guide in English, Spanish, and French, or to get answers to frequently asked questions, visit the support section at: www.iLiveElectronics.
