User’s Guide for Model IHTB158B v1948-01
Safety Instructions & Warnings Important Safety Instructions • • • • • • • • • • • • • • 2 Read these Instructions. Keep these Instructions. Heed all Warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Battery Warnings • WARNING: Do not ingest the battery, Chemical Burn Hazard. • If the remote control supplied with this product contains a coin/button cell battery and the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. • Keep new and used batteries away from children. Iff the battery compartment does not close securely, stop using the product and keep it away from children.
Table of Contents Setup ���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 5 Features Includes Orientation ���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 6 Subwoofer Rear View Subwoofer Front View Remote ���������������������������������
Setup Features • Bluetooth Wireless - range 60 ft. • 6 5.1 surround sound audio inputs • 2 stereo audio inputs Includes • Subwoofer (main unit) • 32" speaker with 4 satellite speakers • Remote control: requires CR2025 battery (included) • RCA stereo audio cable • AC/DC power adapter • Wall mount hardware and instructions Speakers Connect each speaker wire with the corresponding port on the rear of the subwoofer.
Orientation Subwoofer Rear View Stereo Audio Inputs Surround Sound Audio Inputs Audio Outputs (to speakers) DC Power Input Power Plug the AC/DC power adapter (included) into a standard wall outlet and the DC power input on the rear of the subwoofer.
Subwoofer Front View Remote Signal Receiver Power/Source Press to power ON. Press and hold to power OFF. Press to switch between 5.1 CH, Aux In, and Bluetooth modes. Play/Pause/Pair Press to play or pause audio. Press and hold to begin pairing to a Bluetooth device. Skip/Volume +/Press to skip ahead or back an audio track (BLUETOOTH). Press and hold to adjust volume. LED Indicator Lights Speaker Status Indicator Light Power ON Red Light 5.
Remote Functions Note: when using the remote, be sure to aim at the remote signal receiver located on the front of the subwoofer. Power Press to turn the system on or off. Aux Press to switch to Aux In (RCA) mode. 5.1CH Press to switch to 5.1 Surround Sound Mode. Press to switch to Bluetooth Mode. Volume-/+ Press to adjust volume for all speakers. Remote Batteries Requires 1 CR2025 battery (pre-installed). 8 Mute Press to mute the volume.
Audio Inputs 2 Port Stereo RCA Inputs (Aux) If your TV, DVD, or other media player has only 2 ports of audio output, use the top 2 audio inputs (Left/Right channel) on the rear of the subwoofer for stereo audio. Requires an RCA stereo audio cable (included). 1. Connect the RCA stereo audio cable to the RCA Stereo Inputs on the subwoofer and the audio outputs on your TV, DVD player, etc. When connecting stereo audio cables, match the colored plugs to the same colored input ports. 2.
Audio Inputs 6 Port 5.1 Surround Sound RCA Inputs (5.1 CH) If your TV, DVD, or other media player has 6 ports of audio output, use the lower 6 audio inputs on the rear of the subwoofer for 5.1 surround sound audio. Requires RCA stereo audio cables (not included). 1. Connect the RCA audio cables to the RCA Inputs on the subwoofer and the audio outputs on your TV, DVD player, etc. When connecting the audio cables, match the colored plugs to the same colored input ports. 2.
Bluetooth Wireless Pairing to a Bluetooth Device and Playing Audio Wirelessly After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a reset of the device. If your device should become unpaired or you find it is unable to connect, repeat these steps. (remote) to select Bluetooth Mode, indicated by a 1. With the unit powered ON, press Source (subwoofer) or slowly flashing blue light. 2.
Customer Support Contact Information Website: www.iLiveElectronics.com Email Support: prodinfo@dpiinc.com Email Parts: partsinfo@dpiinc.com Phone Support: 1-888-999-4215 Made Green Warranty For Warranty Information and the most up-to-date version of this User’s Guide, go to: www.iLiveElectronics.com International Support To download this User’s Guide in English, Spanish, and French, or to get answers to frequently asked questions, visit the support section at: www.iLiveElectronics.