Bluetooth HD Sound Base User’s Guide for Model ITB174B v1012-01 For the most of this User’s Guide, go to www.iLiveElectronics.com ITB174B-1012-01-IB.
Important Safety Instructions Important Safety Instructions • • • • • • • • • • • • • • Read these Instructions. Keep these Instructions. Heed all Warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Warnings and Precautions FCC Warnings Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Table of Contents Unboxing Your HD Soundbar/TV Stand �����������������������������������������������������������������������������������������������������������������������������������������5 Includes Supporting TVs Features and Specifications Setup ���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������5 Power Remote Battery Indicator Lights Orientation ������
Unboxing Your HD Soundbar/TV Stand Includes Supporting TVs • Remote control: requires a CR2025 battery (pre-installed) The Soundbar/TV Stand is designed to support 20-55" flat panel TVs of all types up to 75 lbs. • RCA stereo audio cable • AC/DC power adaptor Features and Specifications • Supports Bluetooth v2.
Orientation Speaker Rear Inputs Subwoofer Output Line In Optical Input Stereo RCA Audio Inputs (AUX IN) DC Power Input Speaker Controls (Left Side) Power Press to turn the unit on or off. Source Press to switch between Optical, Line In, AUX, and Bluetooth modes. Volume Press to adjust the volume up or down. Pairing/Learn Press to begin pairing with a Bluetooth device. 6 ITB174B-1012-01-IB.
Remote Layout Power Press to turn the unit on or off. Mute Press to mute the volume. BT Press to switch to Bluetooth Mode. Line Press to switch to Line In mode. Optical Press to switch to Optical mode. AUX Press to switch to Aux In mode. Music Press to switch to the EQ optimized for music. Movie Press to switch to the EQ optimized for movie sound. Voice Press to switch to the EQ optimized for dialogue. Treble Press to adjust the treble up or down.
Audio Inputs Using the Stereo RCA Inputs... When connecting two products using an RCA Cable, match the colored ports with the same colored connection. Before use, disconnect any cables connected to the Line In. 1. Connect the RCA Cable to the RCA Stereo Inputs located on the back of the unit, and to the audio outputs on the television. 2. Press the Power button to power on the unit. 3. Press the Source button repeatedly to enter AUX Mode, indicated by a white light. 4.
Using the Stereo RCA Inputs - Rear View Using the Optical Input - Rear View Using the Line In - Side View Customer Support: 1-888-999-4215 ITB174B-1012-01-IB.
Bluetooth Pairing a Bluetooth Device for the First Time 1. Power on the unit by pressing the Power button. 2. Press the BT button on the remote to switch to Bluetooth Mode., indicated by a blue light. 3. Press the Pairing button on the side of the unit. The pairing indicator will flash blue quickly. When pairing, remain within 3 feet of the unit. 4. Using the native controls on your Bluetooth device, select the ITB174 in your Bluetooth settings to pair.
Learn Feature What Is the Learn Feature? The Learn feature captures remote commands from your television remote, and teaches your bar speaker to operate when these commands are pressed. Power, volume and mute are a few examples of commands that the bar speaker can learn. Why Use the Learn Feature? Teaching the bar speaker remote commands will reduce the number of remotes needed, save time searching for remote codes, and improve the ease of operation.
Company Information Contact Information Warranty Website: www.iLiveElectronics.com Email Support: prodinfo@dpiinc.com Email Parts: partsinfo@dpiinc.com Phone Support: 1-888-999-4215 For Warranty Information and the most of this User’s Guide, go to: www.iLiveElectronics.com International Support To download this User’s Guide in English, Spanish, and French, or to get answers to frequently asked questions, visit the support section at: www.iLiveElectronics.
