[GEM PLUS ACCESSIBLE INSTALLATION 1 INSTALLATION Figure 1 b 4 Figure 2 1 2 (waterproof) 1 To mount : Open the Accessible reader by removing the 2 screws (A), under the case. Gently remove the plastic cover. Disconnect the 2 cables {B and C) that connect the plastic cover and the metallic base, then separate the 2 Pisces.
[GEM PLUS ACCESSIBLE INSTALLATION ] 2 CONFIGURATION Plan View : Para SHIELD GIBBON 411 ® dlo —-Te i I) ® connector Jumpers positioning : RS232 connection (standard): Put a jumper between pins 1 and 2 of J10 RS232 TTL.
GEM PLUS ACCESSIBLE INSTALLATION | RS485 2 wires connection ; Place a jumper between pins 2 and 3 of J10 Tamper off detection : Tamper managed by the reader : Place 2 jumpers between pins 2 and 3 of U1 and E3cifooeoe] Tamper managed by the host (standard) © Place 2 jumpers between pins 1 and 2 of U1 and U2 Place 1 jumper between pins 3 of U1 and voodoo] Reader configuration = reader address. = communication mode. Place jumpers on greed parts.
Regulatory Information Notice for the USA: FCC Statement Federal Communications Commission (USA Celt) mercy inter: This equipment hag 0 tested and found ts comply with the limits for a class 8 4 device, pursuant to Pert 15 of FCT Rules T protections against harmful inters ital 2 limits are designed 10 provide reasons ce in 2 residential irrational This equip generates, uses and can radiate radio frequency energy end.