User's Manual

ManualsBrandsGem Group ManualsAudio EquipmentBluetooth Earphone

Back Cover Front Cover page 02 page 03

page 04 page 05 page 06 page 07

Unable to pair the

earbuds with a

mobile device

The sound is low

or distorted

The Bluetooth

indicator light

remains OFF

1. Inspect whether the earbuds is searching

for a Bluetooth enabled device to connect

to. If not, restart the earbuds.

2. Difficulty in searching and connecting to

a desired device can be affected if multiple

devices are equipped, turned on, and in

range for Bluetooth connectivity. Please

turn off or disable the Bluetooth function on

the other devices.

3. The power of the battery is insufficient,

please recharge the earbuds.

1. Inspect the distance between the earbuds

and the Bluetooth enabled device, it may

exceed the Bluetooth transmission range.

2. Inspect if there is an obstacle between

the earbuds and the Bluetooth enabled

device.

3. The power of the battery is insufficient,

please recharge the earbuds.

1. Inspect the volume of the connected

earbuds or Bluetooth enabled device and

adjust the volume as needed.

2. The power of the battery is insufficient,

please recharge the earbuds.

1. The power of the battery is insufficient,

please recharge the earbuds.

2. Restart the earbuds.

BLUETOOTH OPERATION

1. Please ensure that the Bluetooth function has been turned

on in the settings of your Bluetooth enabled device.

2. Turn the earbuds on by pressing the power button for 4

seconds. The indicator light will flash to detect Bluetooth

enabled devices near you and will enter pairing mode.

When pairing, remain within 3 feet of the earbuds. The

indicator light will go off if no Bluetooth devices are detected

within 5 minutes.

3. “GEMLINE EB” will appear on the Bluetooth device list,

select “GEMLINE EB” to establish pairing. If instructed to

enter a PIN code, please enter ‘0000’.

4. Once the earbuds have been paired to the desired mobile

device, the indicator light will turn blue to confirm successful

pairing.

5. When you want to play audio from another Bluetooth device,

disconnect the earbuds from the original device and follow

steps 1-3 to re-pair the earbuds with a new Bluetooth

enabled device.

CHARGING THE EARBUDS

1. When the battery is low, please charge via the included USB

cable. The charging time is approximately 1-1.5 hours and

provides up to 2 hours of continuous operation. Standby

time is approximately 60 hours.

2. The LED indicator light will be red during charging and will

turn blue once it is fully charged.

BUTTON CONTROL

• Pause / Play: Press the On/Off button once to pause the music,

press again to play.

• On / Off: Press and hold the On/Off button to control the power

of the earbuds.

• Vol + / Previous: Press and hold the + button for 2 seconds for

the previous track. Press once to increase the volume.

• Vol - / Next: Press and hold the – button for 2 seconds for the

next track. Press once to reduce the volume.

• Hands-free: Press On/Off button once to answer an incoming

call. While on a call, press On/Off once to end the call.

• Redial last call: Press On/Off button twice to redial last number

dialed on the connected mobile device.

SPECIFICATION

Support profile: A2DP

Bluetooth Specifications：Bluetooth

version 4.1

Transmission distance: up to 2 m (This may vary based on

environmental factors or the type of Bluetooth

device being

used)

Built-in battery: 55 mAh Lithium battery

USB Recharge voltage: DC 5V/500mA

Output power: 16mW

Frequency Response: 20Hz - 20KHz

Transmission Response: 2.4GHz - 2.48 GHz

PACKING

• Bluetooth

Earbuds

• Silicone Earbud Covers

• USB Charging Cable

• Travel Case and Carabiner

• User Manual

WARNING

1. Do not disassemble, repair, or modify the earbuds.

2. Do not place product in or near fire to avoid danger, as it

uses a lithium battery.

3. Avoid storage at extreme temperatures, this can shorten the

battery life and may affect the earbuds.

4. Keep the earbuds dry and do not store the earbuds in damp

areas to avoid damage to the earbuds.

5. Avoid dropping the earbuds as it may damage the product.

KIND REMINDER

1. To prolong the earbuds life span and to avoid hearing

damage, please do not listen to music under high volume

for long periods of time.

2. When an error occurs with the earbuds, please turn off the

earbuds and restart it to troubleshoot.

3. When the earbuds power is low, the Bluetooth range may

be affected. Please charge the earbuds to avoid

disruptions during use.

Overview

Microphone

Recharging Port

Vol + / Previous

On/ Off

Pause / replay

Answer / Hang up

Vol - / Next

Spectrum Bluetooth

Earbuds

User Manual

FCCID: 2AGR43260B

IC ID: 21530-3260B

Summary of content (3 pages)

PAGE 1
FCCID: 2AGR43260B BLUETOOTH OPERATION Overview R SPECIFICATION Bluetooth Specifications：Bluetooth® version 4.1 Support profile: A2DP Transmission distance: up to 2 m (This may vary based on environmental factors or the type of Bluetooth® device being used) Built-in battery: 55 mAh Lithium battery USB Recharge voltage: DC 5V/500mA Output power: 16mW Frequency Response: 20Hz - 20KHz Transmission Response: 2.4GHz - 2.
PAGE 2
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 3
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables auxappareils radio exempts de licence.