® HD-SDI to DVI Scaler Single-Link EXT-HDSDI-2-DVISSL USER MANUAL www.gefen.
ASKING FOR ASSISTANCE Technical Support: Telephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 Technical Support Hours: 8:00 AM to 5:00 PM Monday through Friday PST Write To: Gefen, LLC c/o Customer Service 20600 Nordhoff St Chatsworth, CA 91311 www.gefen.com support@gefen.com Notice Gefen, LLC reserves the right to make changes in the hardware, packaging and any accompanying documentation without prior written notice.
TABLE OF CONTENTS 1 Introduction 2 Operation Notes 3 Panel Descriptions 4 Menu Functions 6 Supported Input/Output Resolutions 7 RMT-8HDS-IR Installation 8 Firmware Update Procedure 9 Specifications 10 Warranty
INTRODUCTION The HDSDI to DVI Single Link Scaler is the newest revision of our HDSDI conversion line incorporating SD/HDSDI Single link mode conversion scaled to Single link DVI-D. Resolutions of up to 1080p are supported over the DVI link for those that want true “High Definition”.
OPERATION NOTES On power up, the HD-SDI to DVI Scaler will automatically detect the input format of the input. The unit is controlled using the included 8 button remote. Pressing the OUTPUT button cycles the HD-SDI to DVI Scaler through the following output modes: 640x480 - 800x600 - 720p - 1080i Other functions and output modes can be accessed through the onscreen menu. (To Restore I/O settings, simply recycle power on the Scaler) To bring up the on-screen menu, press the MENU button.
PANEL DESCRIPTIONS Power Indicator Light Infrared Eye RS-232 Uplink Port Audio Output 5V Power Connector HD-SDI Input 1 HD-SDI Loop Out 1 3 DVI-D Output
MENU FUNCTIONS Aspect: -Full Screen: Stretches input to fill the Monitor. -Letter / Pillar Box: Sets the aspect ratio to fit a letter or pillar box format. Panoramic Zoom feature -Extract: Feature to magnify the signal. -Size: Adjusts signal magnification. -Horizontal / Vertical Position: Moves the magnified signal Horizontally and Vertically -Through: Feature to crop the signal. -Horizontal / Vertical Size: Horizontally and Vertically contracts or expands the cropping viewport.
MENU FUNCTIONS Input Menu Continued... -Audio: Selects which audio pair to use for audio output (1 - 8); Default is Channel 1. -Remote Channel: Changes the IR code of the HD-SDI to DVI Scaler to one of 4 different settings between 0 and 3. When the remote channel is changed, dip switches in the 16 button remote must be changed to the corresponding code in order to continue operating the HD-SDI to DVI Scaler. (Please see RMT-8HDS-IR Installation page for more information.
SUPPORTED INPUT/OUTPUT RESOLUTIONS Input Video Formats Supported: 480i 720p/50 480p 720p/59.94 576i 720p/60 576p 1035i/59.94 720p/23.98 1035i/60 720p/24 1080i/50 720p/25 1080i/50M 720p/29.97 1080i/59.94 720p/30 1080i/60 1080p/23.98 1080p/24 1080p/25 1080p/29.97 1080p/30 1080sf/23.98 1080sf/24 1080sf/25 1080sf29.97 1080sf/30 2K-p/23.98 2K-p/24 2K-sf/23.98 2K-sf/24 Output Video Formats Supported: 480i 720p/50 480p 720p/59.94 576i 720p/60 576p 1035i/59.94 720p/23.
RMT-8HDS-IR INSTALLATION 1. Remove battery cover from the back of the RMT-8HDS-IR remote. 2. Verify that dip switches 1 & 2 are in the down (OFF) position. 3. Insert the battery, hold the battery so that you can see the positive side facing up. The side that is not marked must be facing down. 4. Test the RMT-8HDS-IR remote by pressing ONLY one button at a time. The indicator light on the remote will flash once each time you press a button.
FIRMWARE UPDATE PROCEDURE Please check http://www.gefen.com/kvm/support/download.jsp for firmware updates and procedures.
SPECIFICATIONS Input Video Bandwidth.....................................................................................1.485 Gbps Output Video Bandwidth.....................................................1.65 Gbps (Single Link DVI-D) Maximum Input Resolution..........................................................................2048x1080p24 Maximum Output Resolution.................................................................1920x1200@60Hz Audio Output...............................................
10
*ma-HDSDI-2-dvissl* Rev X2 20600 Nordhoff St, Chatsworth CA 91311 1-800-545-6900 818-772-9100 www.gefen.com Pb fax: 818-772-9120 support@gefen.
