SMART WI-FI DOOR SENSOR START GUIDE ENGLISH
Thank you for purchasing your GEENI smart home product. Get started using your new devices by downloading Geeni, one convenient app that manages everything straight from your phone or tablet. Easily connect to your home Wi-Fi and control multiple devices from the touch of your fingertips.
1 Download the Geeni app. 2 Register a Geeni account. STEP 1. Enter your mobile phone number or email address. 2 STEP 2. Enter the verification code and create a password.
2 Register a Geeni account, con. 3 Activate Reset Button LED Light Disassemble button STEP 1. Press and hold the Reset Button for 6 seconds. The LED indicator light will begin to rapidly flash, indicating that your sensor is ready to connect via Easy Mode. What does the blinking light mean? STEP 3. Enter your information to log in. Reset the sensor by pressing and holding the Reset Button for 6 seconds. The LED Indicator Light will begin to flash rapidly.
4 Connect: Easy Mode STEP 1. In the Geeni app, on the top corner of the Devices screen, click (+). Choose “Sensors“. 6 STEP 2. Make sure the sensor’s LED Indicator Light is rapidly flashing blue. If it is not, press and hold the Reset Button for 6 seconds. Once the LED Indicator Light is rapidly flashing blue, press “Next Step” in the Geeni app. STEP 3. Enter your Wi-Fi network and password. STEP 4. The Geeni app will connect to your device. *If the connection fails, try to connect using AP Mode.
5 Connect: AP Mode STEP 1. Make sure the sensor’s LED Indicator Light is slowly flashing blue. If it is not, follow the instructions on page 5 to reset. STEP 2. In the Geeni app, on the top corner of the Devices screen, click (+). Choose “Sensors“. Choose “AP Mode” in the top corner. 8 STEP 3. Click “Next” and enter your Wi-Fi details. STEP 4. Follow the instructions to choose the device from your Wi-Fi list. STEP 5. The Geeni app will connect to your device.
6 Installation 3M Mounting Adhensive Sticker Mounting Adhensive Sticker 3M *Before installing, make sure the sensor is aligned so that the arrows will make contact when the door/window is closed and will separate when the door/window is opened. Option 1. Use the included adhesive strips to mount the sensor. 10 Option 2. Install using the included screws and screw protectors.
7 Functions The sensor will send notifications within 3–5 seconds of being triggered. 12 Select “History” to view recent sensor activations. Select “Notice” to turn the sensor alerts on or off. Connect multiple Geeni devices to set automatic actions when the sensor is triggered.
Frequently Asked Questions 1. Can I share with family and friends? Yes, you can share access to all Geeni devices—cameras, bulbs, sensors, etc.—with family and friends. In the Geeni app, press Profile and click on “Device Sharing” to give or revoke sharing permissions. In order to share, the other user should already have downloaded the Geeni app and registered an account. Laundry Room Door 2.
Troubleshooting Unable to connect to your Wi-Fi network? Make sure you entered the correct Wi-Fi password during the Wi-Fi setup. Check whether there are any Internet connection problems. If the Wi-Fi signal is too weak, reset your Wi-Fi router and try again. Reset the device Press and hold the Reset Button for 6 seconds.
Can’t connect? Need help? DO NOT RETURN THIS PRODUCT TO THE STORE Geeni support: support@mygeeni.com (888) 232-3143 Toll-free or tap ‘Support’ for help in the Geeni app.