SMART WI-FI CAMERA START GUIDE
Thank you for purchasing your GEENI smart home product. Get started using your new devices by downloading Geeni, one convenient app that manages everything straight from your phone or tablet. Easily connect to your home Wi-Fi and control multiple devices from the touch of your fingertips.
1 Download the Geeni app. 2 Register an account on the Geeni app. STEP 1. Enter your mobile phone number or email address. 2 STEP 2. Enter the verification code and create a password.
2 Register an account on the Geeni app. 3 Plug In. How do I reset my device? Hold the reset button (located on the side of the camera) for several seconds until the camera starts to beep. Wait for the indicator light to start blinking to confirm that the camera has been reset. Easy Mounting Reset Button The camera has easy-to-use hanging holes located on the bottom. *Optional: Insert microSD card as shown What does the blinking light mean? STEP 3. Enter your information to log in.
4 Add device. Method 1: Easy Mode STEP 1. In the Geeni app, on the top corner of the Devices screen, click (+). Choose “Video Camera“. STEP 2. Make sure the camera’s indicator light is blinking red. If it is not, follow the reset instructions on page 5. Once the indicator light blinks red, press “Next Step”. STEP 3. Enter your Wi-Fi network and password. STEP 4. The Geeni app will connect to your device.
5 Add device. Method 2: Backup QR Code Mode STEP 1. Make sure the camera’s indicator light is blinking red. If it is not, follow the reset instructions on page 5. QR Code STEP 2. In the Geeni app, on the top corner of the Devices screen, click (+). Choose “Video Camera“. Choose “QR Code” in the top corner. STEP 3. Click “Next” and enter your Wi-Fi details. STEP 4. Scan the QR Code with the camera. STEP 5.
Settings Access Camera Settings: From your main device list, click on the camera you want to edit, then press “•••“ button on the top right for advanced settings. Device Name: Press to rename your device to something like “Bedroom” or “Kids’ Room”. Device Sharing: Let friends, spouse, roommates, or family keep an eye on what your cameras see. Whether it’s a baby’s crib or the family dog, you can decide who gets to check in, access the camera, and set notifications.
Live View Playback Hear what’s happening around the camera Hear what’s happening around the camera Full screen Full screen Activate push notifications to be notified of any movement Press to activate the microphone and speak through the camera.
Frequently Asked Questions 1. Can I share with family and friends? Yes, you can share access to all Geeni devices—cameras, bulbs, plugs, etc.—with family and friends. In the Geeni app, press the “Profile” button and click on “Device Sharing”, and you will be able to give or revoke sharing permissions. In order to share, the other user should already have downloaded the Geeni app and registered an account. 2.
Troubleshooting FCC Notice: Cannot connect to your Wi-Fi network. Make sure you entered the correct Wi-Fi password during the Wi-Fi setup. Check whether there are any Internet connection problems. If the Wi-Fi signal is too weak, reset your Wi-Fi router and try again. This device complies with Part 15 of the FCC Rules. Operation is subject to the two following conditions: 1. This device may not cause harmful interference. 2.
Can’t connect? Need help? DO NOT RETURN THIS PRODUCT TO THE STORE Geeni support: support.mygeeni.com (888) 232-3143 Toll-free (English Only) or tap ‘Support’ for help in the Geeni app.