Installation Instructions

Bluetooth Controller

Model:GK_B201 1.0

Input:AC100-240V,50/60HZ, 0.1A

The bluetooth controller is used in the LED lamp to control the brightness of the UV lamp and the

dimming voltage output. The dimming voltage output is 0-10V.

DIM+/DIM- AC_L/AC_N

IR+/IR- UV+/UV-

The input and output pins of the product are shown in the figure. Install the product into the LED

lamp, connect the corresponding dimmer and special infrared and ultraviolet lamps, and then

connect and use through APP.The product has two Bluetooth modules, which can be networked

and can be realized on the APP.

The DIM port is connected to the dimming controller, the UV port is connected to the ultraviolet

LED lamp, and the IR port is connected to the infrared LED lamp. The product can be installed in

the plant growth lamp for use. To realize the control function

Users can download the GeekLight application from the Apple App Market and Google Play, and

connect and use the device according to the APP guidelines after installation.

PAGE 1
Bluetooth Controller Model:GK_B201 1.0 Input:AC100-240V,50/60HZ, 0.1A The bluetooth controller is used in the LED lamp to control the brightness of the UV lamp and the dimming voltage output. The dimming voltage output is 0-10V. DIM+/DIM- IR+/IR- AC_L/AC_N UV+/UV- The input and output pins of the product are shown in the figure. Install the product into the LED lamp, connect the corresponding dimmer and special infrared and ultraviolet lamps, and then connect and use through APP.
PAGE 2
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference. (2)This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.