User Manual

ManualsBrandsGechic ManualsComputers & Accessories11.6 inch 1920 x 1080 IPS Portable Monitor with HDMI VGA MiniDisplayPort inputs

Manual of 1101H/P

Read Me Before Usage!

Summary of content (15 pages)

PAGE 1
Read Me Before Usage! Manual of 1101H/P
PAGE 2
Table of Contents Chapter 1 Content Description —1 Section 1 On-Lap Monitor and Accessories —1 Section 2 Notices of On-Lap Monitor —2 Section 3 Safety Precautions —3 Section 4 Safety Instructions —3 Section 5 Product Maintenance —3 Section 6 LCD Pixel Statement —4 Section 7 Disposal of Electronic Equipment —4 Chapter 2 Installation Instructions Section 1 Protective Cover and Tripod Mount Kit Assembly Section 2 Connect the Video Cable and USB Touch and Power Cable Chapter 3 Power On and Off
PAGE 3
1 Chapter 1 Content Description Section 1 On-Lap Monitor and Accessories 1. Parts Description Fig.: On-Lap 1101 Series Front Fig.: 1101 buttons and LED light Description Fig.
PAGE 4
2 Back Front Fig.: Parts Description of Protective Cover 2. Package & Accessories Accessories On-Lap1101H On-Lap1101P Cover Stand * 1 set Yes Yes Micro HDMI Video Cable*1 Yes Yes USB to Micro USB Cable*1 Yes Yes Charger(5V,2A)*1 Yes Yes Mini-HDMI to Micro HDMI Video Cable (0.6m) Optional Yes VGA Video Cable(1.2m) Optional Optional mini-DisplayPort Video Cable(1.2m) Optional Optional Mini-HDMI to Micro HDMI Video Cable (2.1m) Optional Optional Micro HDMI Video Cable (2.
PAGE 5
3 2. 3. 4. 5. Please do not use sharp objects to touch the screen. Please do not press the arm or other item to the screen or apply heavy pressure onto the screen. Disconnect power source before cleaning. Please use soft cloth to clean touch screen monitor. When difficult to clean, wet the cloth then perform cleaning again. Please do not use chlorine, alcohol, ammonia, detergent or other corroding solvents. These solvents may cause damage to the touch screen monitor or leave unremovable residue.
PAGE 6
4 Section 6 LCD Pixel Statement The On-Lap Monitor uses a high quality LCD panel. Nevertheless, there might be instances where defective pixels may occur; however, this will not aﬀect the normal functioning of the Product. Section 7 Disposal of Electronic Equipment The electronic equipment and batteries should not be disposed of with household waste but should be left at an appropriate collection point for recycling.
PAGE 7
5 2 Tripod Mount Kit Installation (Optional) First Screw the Tripod Mount Kit in VESA 75 arm or camera cradle head/ tripod. Place the Monitor into Tripod Mount Kit, as shown in Fig, and secure the Monitor by screws in. Fig ： Screw the Tripod Mount Kit in VESA 75 arm. Put the Monitor in and secure it by screws. Fig ： Screw the Tripod Mount Kit in camera cradle head. Put the Monitor in and secure it by screws.
PAGE 8
6 Section 2 Connect the Video Cable and USB Power Cable 1. Connection method for On-Lap 1101 Connect USB Power cable first and then connect Video cable. USB power Cable can be connected to USB port of laptop or 5V 2A USB charger. Voice is transmitted by microHDMI or DisplayPort ports. VGA does not support voice transmission. PS: If one USB port of laptop does not supply enough power. Please insert another USB plug to laptop, which supply double power.
PAGE 9
7 2. Resolution setting – Windows 7/ Windows 8.1/ Windows 10 system ● Click on icon ● Click on Control Panel > Appearance and Personalization ● Click on Display > Connect to an external display. Normally Display ① is the laptop’s monitor, Display ② is the external monitor. Click on Detect if you are unsure. ● At Display, select “2.HDMI” (digital video) or “2. display device: VGA” (analog video) for Display ● Select Resoluton“1920x1080” ● Select "Landscape" or "Portrait" for Orientation.
PAGE 10
8 Section 2 OSD Description 1. Basic Button Operation Press button to launch the OSD panel. Press or to view the functions. To adjust a certain function, press to launch it. If the selected function consists of sub-menu, press or again to view the submenu. When the desired function is highlighted, press to launch it. Press or to change the setting. To exit, press to exit. Repeat the preceding steps to adjust other setting. 2. Display Settings As shown in Fig.
PAGE 11
9 4. 5. 6. 7. 8. 9. Aspect Ratio Please refer to Fig. Suggested setting is 16:9. When HDMI image is 4:3 format, can select 4:3, make image not enlarge to 16:9 and change shape. Using VGA image input won’t have this function Overscan: Only when input HDMI Video signal (ex. 1080P/720P/576P /480P) , can use such function. Use this function can adjust the image scan area. Manual Image Adjust Auto Adjust: Only when input VGA signal can use such function. Will automatically adjust VGA setting H.
PAGE 12
10 Section 3 Low Power Protection Warning If the volume setting is too high, the power requirement may be greater than the power provided by computer or external 5V DC Charger. At this time, the Low Power Protection Warning will appear. Please reduce the volume immediately. Connect the two USB connectors of Micro USB Touch and Power Cable to the two USB ports on computer. If the volume is not reduced in time, the Monitor will decrease the volume and brightness automatically. Fig.
PAGE 13
11 2. mini-DisplayPort Connector Pinout Pin Name Pin Name Pin Name 1 GND 8 GND 15 ML_Lane2(p) 2 Hot Plug Detect 9 ML_Lane1(p) 16 AUX_CH(p) 3 ML_Lane0(p) 10 ML_Lane3(p) 17 ML_Lane2(n) 4 CONFIG1 11 ML_Lane1(n) 18 AUX_CH(n) 5 ML_Lane0(n) 12 ML_Lane3(n) 19 GND 6 CONFIG2 13 GND 20 DP PWR 7 GND 14 GND Pin ： mini-DisplayPort Connector (Connect mini-DisplayPort) 3. VGA Connector Pinout Pin No. Name Pin No. Name Pin No.
PAGE 14
12 Section 3 Specification Model Panel Resolution/ Color Depth On-Lap1101H On-Lap1101P 11.6" TFT IPS LCD (16:9 Wide) LED Backlight 11.6" TFT IPS LCD (16:9 Wide) LED Backlight 1920x1080/ 16.7M colors 1920x1080/ 16.7M colors Pixel Pitch 0.1335mm (H) *0.1335mm (V) 0.1335mm (H) *0.
PAGE 15
13 Section 4 Trouble Shooting 1. Image or Audio output troubles Problem Solution 1.Check if Power On/Off Indicator shows green light. If not, it means no power connection. Please refer to user manual instruction to connect power. No image 2.Check if VGA/HDMI Video Cable is connected between On-Lap’s connector port and computer’s connector port. 3.Check if Micro HDMI Video Cable connector is accidently connected to the VGA port/ DisplayPort port on On-Lap.