Manual

Fuse
replacement
IMPORTANT: Never install grill light bulb(s) rated
higher than 10 watts. This will cause the fuse to
blow.
1. See Steps 1-3 of the Battery Replacement
section to access the fuse in the batterg/fuse
mounting assemblg.
2. Unscrew the fuse cover and remove the
blown fuse.
Unscrewfuse
cover
3,
Replace with a new 2-amp glass fuse and
replace the cover.
Glassfuse
Wheels
(free-standing
grill only)
The lock mechanism for the wheels is on the left
front wheel on all models. Alwags set the lock
mechanism on the free-standing grill before
using.
If the wheels develop a squeak after exposure
to the elements, lubricate the axle at the center
of the wheel with a silicone sprag or other
general-purpose lubricant.
Wheel with lockmechanism
Securitg
loop
A stainless steel loop iswelded to the bottom of
the free-standing grill chassis near the back right
wheel. To secure the grill, put a chain through
the steel loop and padlock through a stationarg,
secured egelet (chain, padlock and egelet not
provided).
Loopfor securingfree-standinggrill
with a chain(located ongrill chassis
bottomnearthe backright wheel)
Custom
grill cover
(on some models)
Clean the cover with warm, sudsg water and
rinse.
NOTE: Lower the side shelves (on free-standing
models onlU) before using the grill cover.
29