Use and Care Guide

8 49-55111
Care and cleaning
CARE AND CLEANING
To clean the outside:
Wipe with a clean damp cloth.
Painted panels:
Apply a coat of kitchen/appliance wax when the
compactor is new, and then several times a year.
Stainless steel panels:
Stainless steel panels can be cleaned with Cerama
Bryte® or a similar product using a clean, soft cloth.
Cerama Bryte is available from GE Appliances by calling
877.959.8688 (US) or 800.661.1616 (Canada).
To clean the drawer interior:
1
Remove the bag. See the Removing a Full Trash Bag
section.
2
Wear protective gloves. There may be bits of glass in
the drawer. Press the side door latch down.
3
Hold the side door latch down and tilt the side of the
drawer until the latch clears the drawer front.
4
Wipe with a damp cloth.
5
Press the side door latch down while pressing the side
to the upright position. Lock the side door latch.
To clean the cabinet interior:
1
Pull the drawer out until it stops. Note the tracks in
which the drawer rollers move.
2
Wear protective gloves. Lift the front to clear the drawer
stops. Grab the drawer on both sides. Pull it out the rest
of the way and set it aside.
3
Vacuum inside of the cabinet. Liquid spills or wet trash
should be cleaned up by hand, or use a vacuum
designed to pick up liquid.
4
Wash, rinse and dry the inside.
Cleaning the Unit
As is true of most appliances, proper care is needed to give you continued satisfaction. Before cleaning the compactor, turn
the knob to the OFF position and remove it. If you will be away for more than a couple of days, remove the compactor bag.
Lock the compactor by removing the knob and store it in a safe place.