94940 Revised Size 10/18/02 12:22 PM Page 1 RM94940 Universal Remote Control INSTRUCTION MANUAL
94940 Revised Size 10/18/02 12:22 PM Page 2 Thank you for purchasing the GE Universal Remote Control. This product is designed to provide years of service operating a wide variety of video and audio equipment. Please retain this guide for future reference. Table of Contents Install the Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Button Description . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3 Learning Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
94940 Revised Size 10/18/02 12:22 PM Page 3 Button Description INDICATOR LIGHT The Indicator Light flashes to show that the remote is working. ON•OFF The ON•OFF button operates the same as your original remote. NOTE: Some GE, RCA and ProScan models require you to press the device button to turn the device on and the ON•OFF button to turn the device off. LEARN The Learn button allows you to “record” and “delete” “learned” functions from the original or other remote controls.
94940 Revised Size 10/18/02 12:22 PM Page 4 MENU Brings up the Main Menu. If you already in the menu system, press SELECT to select a highlighted choice. Use the arrows buttons to move through the Menu Selection. CLEAR Removes the on screen display to return to normal viewing. 0-9 The number buttons operates the same as on your original remote, and are used for entering device codes. ENTER The ENTER button is used to complete channel selection for some brands of TV.
94940 Revised Size 10/18/02 12:22 PM Page 5 Learning Function The learning feature is used as a supplement to the standard preprogrammed library. The standard code library provides most of the functions needed, but you can add a small number of additional functions of your choice. Note: No functions may be stored under the LEARN, SLEEP, CODE SEARCH, MENU or any of the device buttons. 1. Place the 94940 remote control unit and the Original remote control unit so that they face each other.
94940 Revised Size 10/18/02 12:22 PM Page 6 Clearing A Learned Button To clear a learned button sequence, use the procedure below. Note: No functions may be stored under the LEARN, SLEEP, CODE SEARCH or any of the device buttons. 1. Press and hold the CODE SEARCH button until the INDICATORLIGHT lights, then release the CODESEARCH button. CD 2. Press an release the desired Mode button (TV, VCR, CABLE,SAT, etc. . . ). The INDICATOR LIGHT will blink off once the button press is accepted.
94940 Revised Size 10/18/02 12:22 PM Page 7 Programming For TV Most GE, RCAand ProScan TVs will not require programming. Check to see if your TV responds to the remote before you begin programming. 1. Manually turn on the TV. Find the three digit code for your TV in the code list at the back of the instructions. 2. Press and hold the CODESEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button. 3. Press and release the TV button (The INDICATOR LIGHT will blink then remain lit.
94940 Revised Size 10/18/02 12:22 PM Page 8 Programming For VCR Most GE, RCAand ProScan VCRs will not require programming. Check to see if your VCR responds to the remote before you begin programming. 1. Manually turn on the VCR. Find the three digit code for your VCR at the back of the instructions. 2. Press and hold the CODESEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button. 3. Press and release the VCR button (The INDICATOR LIGHT will blink then remain lit. 4.
4940 Revised Size 10/18/02 12:22 PM Page 9 Programming For DVD Most GE, RCAand ProScan DVD systems will not require programming. Check to see if your DVD system responds to the remote before you begin programming. 1. Manually turn on the DVD system. Find the three digit code for your DVD system at the back of the instructions. 2. Press and hold the CODESEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button. 3.
94940 Revised Size 10/18/02 12:22 PM Page 10 Programming For DBS Satellite System Most GE, RCAand ProScan Satellite systems will not require programming. Check to see if your DBS Satellite system responds to the remote before you begin programming. 1. Manually turn on the DBS system. Find the three digit code for your DBS system at the back of the instructions. 2. Press and hold the CODESEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button. 3.
94940 Revised Size 10/18/02 12:22 PM Page 11 Programming For Cable 1. Manually turn on the Cable Box. Find the three digit code for your Cable Box at the back of the instructions. 2. Press and hold the CODESEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button. 3. Press and release the CBL/SAT button (The INDICATOR LIGHT will blink then remain lit. CBL/SAT 4. Enter the code using the Number Buttons. After your code is entered, the INDICATOR LIGHT will turn off.
94940 Revised Size 10/18/02 12:22 PM Page 12 Programming For CD 1. Manually turn on the CD player. Find the three digit code for your CD player you wish to control at the back of the instructions. 2. Press and hold the CODESEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button. 3. Press and release the CD button (The INDICATOR LIGHT will blink then remain lit. 4. Enter the code using the Number Buttons. After your code is entered, the INDICATOR LIGHT will turn off.
94940 Revised Size 10/18/02 12:22 PM Page 13 Programming For AUX 1 or AUX 2 Buttons With the AUX 1 and AUX2 buttons, you can assign a second TV, DVD, CD player, VCR, Satellite System, or Cable Box to it. 1. Manually turn on the device you wish to control. Find the three digit code for the device you wish to program in the code list at the back of the instructions. 2. Press and hold the CODE SEARCH button until the INDICATOR LIGHT lights, then release the CODESEARCH button. 3.
94940 Revised Size 10/18/02 12:22 PM Page 14 Sleep Function The Sleep Function will turn off your TV automatically after the user programs the time interval from one (1) to ninety-nine (99) minutes. 1. Press and hold the SLEEPbutton. The INDICATOR LIGHT will stay lit. Release the SLEEPbutton. 2. Enter time in minutes using the numerical keypad. INDICATOR LIGHT will go off. (Min.: 1 minute/keypad entry 0-1) (Max.: 99 minutes/keypad entry 9-9) 3. Leave remote aimed at television.
94940 Revised Size 10/18/02 12:22 PM Page 15 Programming With Code Search If your TV, VCR, DVD player, DBS Satellite System, Cable Box or CD player does not respond after you have tried all the codes for your brand, or if your brand is not listed, try searching your code by following the steps below: 1. Manually turn on the device you wish to program. 2. Press and hold the CODE SEARCH until the INDICATOR LIGHT lights, then release CODE SEARCH. 3.
94940 Revised Size 10/18/02 12:22 PM Page 16 3. Press and release CODE SEARCH. The INDICATOR LIGHTwill turn off. 4. Starting with 0 on the keypad, press the number buttons in order (0-9) until the INDICATOR LIGHT blinks. 5. The number which causes the INDICATOR LIGHT to blink is the first digit of your code. 6. Repeat Step 4 until you have retrieved all three numbers in the code. Trouble Shooting PROBLEM SOLUTION Red light not blinking when you press any key.
94940 Revised Size 10/18/02 12:22 PM Page 17 Trouble Shooting (con’t.) PROBLEM SOLUTION Problems changing channels If your original remote required ENTER after a channel, press ENTER after you select a channel. No response after pressing a key A) Make sure you have new batteries and you are aiming your remote at your device. B) Check that batteries are properly installed. SELECT button not respond- Try using the DISPLAY ing button to make the selection while in the Program Guide.
90 Day Limited Warranty Jasco Products Company warrants this product to be free from manufacturing defects for a period of ninety days from the original date of consumer purchase. This warranty is limited to the repair or replacement of this product only and does not extend to consequential or incidental damage to other products that may be used with this unit. This warranty is in lieu of all other warranties express or implied.
94940 Revised Size 10/18/02 12:22 PM Page 19 RM94940 Control Remoto Universal Instrucciones 18
94940 Revised Size 10/18/02 12:22 PM Page 20 Gracias por comprar el Control Remoto Universal GE. Este producto está diseñado para proveerle años de servicio operando una amplia variedad de equipo de video y audio. Por favor guarde esta guía para obtener referencias en el futuro. Indice Instale las Baterías . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Descripción de los Botones . . . . . . . . . . . . . . .20-21 Funcion Que Aprende . . . . . . . . . . . . . . . . . . . . . . . . .
94940 Revised Size 10/18/02 12:22 PM Page 21 Descripción de Botones LUZ INDICADORA La luz indicadora parpadea para mostrar que el control remoto está trabajando. ON-OFF (ENCENDIDO-APAGADO) El botón ON-OFF opera de la misma manera que su control remoto original. NOTA: Algunos modelos GE, RCAy ProScan requieren que usted presione el botón del aparato para encender el aparato y el botón ONOFF para apagarlo.
MENU (MENU/PROGRAMAR) Muestra en la pantalla el Menu Principal. Si usted ya se encuentra en el sistema del menu, presione SELECT para seleccionar la opción resaltada. Utilice los botones con flechas para moverse dentro del Menu. CLEAR (DESPEJAR) Remueve lo que está mostrado en la pantalla para volver a la pantalla normal. 0-9 Los botones enumerados operan igual que en su control remoto original y son utilizados para introducir los códigos de los aparatos.
94940 Revised Size 10/18/02 12:22 PM Page 23 Función Que aprende: Se utiliza la característica que aprende como un suplemento a la biblioteca preprogramada estándar. La biblioteca estándar del código proporciona a la mayoría de las funciones necesitadas, pero usted puede agregar un número pequeño de funciones adicionales de su opción.
Borrando un botón aprendido Para ser claro una secuencia del botón aprendido, utiliza el procedimiento abajo. Nota: Ningunas funciones se pueden salvar bajo el APRENDER, el SUEÑO, la BÚSQUEDAdel CÓDIGO (LEARN, SLEEP, CODE SEARCH) o la cualquiera de los botones del dispositivo. 1. Presione y sostenga el botón de la BÚSQUEDAdel CÓDIGO hasta que las luces de la LUZ de INDICADOR, después versión el botón de la BÚSQUEDAdel CÓDIGO. 2.
94940 Revised Size 10/18/02 12:22 PM Page 25 Programación para el televisor La mayor parte de los televisores GE, RCAy ProScan no requerir n ser programados. Verifique para ver si su televisor responde al control remoto antes de comenzar la programación. 1. 1. Manualmente encienda el televisor. Encuentre el código de tres dígitos para su televisor en la parte posteriora de las instrucciones. 2.
94940 Revised Size 10/18/02 12:22 PM Page 26 Programación para VCR1 y VCR2 La mayor parte de las videograbadoras GE, RCA y ProScan no requerirán ser programadas. Verifique para ver si su videograbadora responde al control remoto antes de comenzar la programación. 1. Manualmente encienda la videograbadora. Encuentre el código de tres dígitos en la parte posteriora de las instrucciones. 2.
94940 Revised Size 10/18/02 12:22 PM Page 27 Programación para el sistema DVD La mayor parte de los sistemas DVD GE, RCA y ProScan no requerirán ser programados. Verifique para ver si su sistema DVD responde al control remoto antes de comenzar la programación. 1. Manualmente encienda el sistema DVD. Encuentre el código de tres dígitos para su sistema DVD en la parte posteriora de las instrucciones. . 2.
94940 Revised Size 10/18/02 12:22 PM Page 28 Programación para el Sistema de Satélite DBS La mayor parte de los sistemas de Satélite GE, RCA y ProScan no requerirán ser programados. Verifique para ver si su sistema de Satélite DBS responde al control remoto antes de comenzar la programación. 1. Manualmente encienda el sistema DBS. Encuentre el código de tres dígitos para su sistema DBS en la parte posteriora de las instrucciones. 2.
94940 Revised Size 10/18/02 12:22 PM Page 29 Programación para Cable 1. Manualmente encienda su rectángulo del cable. Encuentre el código de tres dígitos para su rectángulo del cable en la parte posteriora de las instrucciones. 2. Mantenga presionado el botón CODE SEARCH hasta que la LUZ INDICADORAse encienda, entonces suelte el botón CODE SEARCH. CBL/SAT 3. Presione y suelte el botón CBL/SAT (La LUZ INDICADORA parpadeará y después permanecerá encendida.) 4.
94940 Revised Size 10/18/02 12:22 PM Page 30 Programación para CD 1. Manualmente encienda su jugador del CD. Encuentre el código de tres dígitos para su CD en la parte posteriora de las instrucciones. 2. Mantenga presionado el botón CODE SEARCH hasta que la LUZ INDICADORAse encienda, entonces suelte el botón CODE SEARCH. 3. Presione y suelte el botón CD (La LUZ INDICADORAparpadeará y después permanecerá encendida.) 4. Introduzca el código utilizando los Botones Numerados.
94940 Revised Size 10/18/02 12:22 PM Page 31 ProgramaciÛn para Botón AUX 1 o AUX 2 Con los botones del AUX 1 o AUX 2 pueden asignar una TV, VCR o sistema de sátelite segunda o caje de cable a la botón "AUX". 1. Manualmente encienda el aparato que desea controlar. Encuentre el código de tres dígitos para el aparato que desea programar en la la parte posteriora de las instrucciones. 2. Mantenga presionado el botón CODE SEARCH hasta que la LUZ INDICADORA se encienda, entonces suelte el botón CODE SEARCH.
94940 Revised Size 10/18/02 12:22 PM Page 32 Función de apagado automático La función de apagado automático apagará su televisor automáticamente después de que el usuario programe un intervalo de tiempo entre uno (1) y noventa y nueve (99) minutos. 1. Mantenga presionado el botón SLEEP. La LUZ INDICADORApermanecerá encendida. Suelte el botón SLEEP. 2. Introduzca el tiempo en minutos utilizando el teclado de numeros. La LUZ INDICADORAse apagará.
94940 Revised Size 10/18/02 12:22 PM Page 33 Programación con B˙squeda de Códigos Si usted necesita encontrar el código de tres dígitos para su televisión, videograbadora, sistema DBS, Caja del Cable o sistema de audio después de que se ha progra mado su aparato, utilice este procedimiento: 1. Manualmente encienda el aparato que desee programar. 2. Mantenga presionado el botón CODE SEARCH hasta que la LUZ INDICADORAse encienda, entonces suelte el botón CODE SEARCH. CD CBL/SAT 3.
94940 Revised Size 10/18/02 4. Comenzando con el numero 0, presione los botones numéricos en orden (0-9) hasta que la LUZ INDICADORAparpadee. 5. El numero que cause que la LUZ INDICADORA parpadee, es el primer dígito en su código. 6. Repita el paso 4 hasta que haya obtenido los tres numeros en el código.
94940 Revised Size 10/18/02 12:22 PM Page 35 GuÌa de Problemas y Soluciones PROBLEMA SOLUCION La luz roja no parpadea cuando presiona cualquier tecla. A) Reemplace las pilas con unas alcalinas nuevas AAA. B) Verifique que las pilas estén instaladas correctamente. El control remoto no opera sus aparatos de video. A) Trate todos los códigos listados para su marca. B) Trate el método de Busqueda de Códigos en la página 17.
94940 Revised Size 10/18/02 12:22 PM Page 36 PROBLEMA SOLUCION La luz Indicadora Parpadea Código no válido para el aparato. Verifique la lista de códigos y vuelva a programar el Control Remoto. La característica del sueño no trabaja El telecontrol debe seguir siendo dirigida al televisión después de que elsueño se fije en la orden para que trabaje. NOTA: Puede ser necesario volver a programar el control remoto después de remover las baterÌas.
94940 Revised Size 10/18/02 12:22 PM CODE LIST 36 Page 37
94940 Revised Size 10/18/02 12:22 PM CODE LIST 37 Page 38
94940 Revised Size 10/18/02 12:22 PM CODE LIST 38 Page 39
94940 Revised Size 10/18/02 12:22 PM CODE LIST 39 Page 40