Installation Guide

ManualsBrandsGE ManualsRefrigerated DisplayGE RH30 LED System

imagination at work

Lighting

Retrot and OEM

Installation Guide

IMMERSION

LED Display Lighting

Canopy Lighting

12-INCH:

GEMT301250CAN-SY (84050)

GEMT301240CAN-SY (84046)

GEMT301230CAN-SY (84048)

24-INCH:

GEMT302450CAN-SY/SB (69640/69641)

GEMT302440CAN-SY/SB (69652/69653)

GEMT302430CAN-SY/SB (69682/69684)

GEMT302435CAN-SY/SB (69709/69710)

36-INCH:

GEMT303650CAN-SY/SB (69642/69643)

GEMT303640CAN-SY/SB (69660/69661)

GEMT303630CAN-SY/SB (69685/69686)

GEMT303635CAN-SY/SB (69711/69712)

48-INCH:

GEMT304850CAN-SY/SB (69644/69645)

GEMT304840CAN-SY/SB (69662/69663)

GEMT304830CAN-SY/SB (69687/69688)

GEMT304835CAN-SY/SB (69713/69714)

Premium Canopy Lighting

12-INCH:

GEMT311240CAN-SY (84043)

GEMT311230CAN-SY (84041)

24-INCH:

GEMT312430CAN-SY/SB (69697/69698)

GEMT312440CAN-SY/SB (69670/69671)

36-INCH:

GEMT313630CAN-SY/SB (69699/69700)

GEMT313640CAN-SY/SB (69672/69673)

48-INCH:

GEMT314830CAN-SY/SB (69701/69702)

GEMT314840CAN-SY/SB (69674/69675)

Undershelf Lighting

12-INCH:

GEMT301250USL-SY (84052)

GEMT301240USL-SY (84047)

GEMT301230USL-SY (84049)

24-INCH:

GEMT302450USL-SY/SB (69646/69647)

GEMT302440USL-SY/SB (69664/69665)

GEMT302430USL-SY/SB (69689/69690)

GEMT302435USL-SY/SB (69715/69716)

36-INCH:

GEMT303650USL-SY/SB (69648/69649)

GEMT303640USL-SY/SB (69666/69667)

GEMT303630USL-SY/SB (69691/69694)

GEMT303635USL-SY/SB (69717/69718)

48-INCH:

GEMT304850USL-SY/SB (69650/69651)

GEMT304840USL-SY/SB (69668/69669)

GEMT304830USL-SY/SB (69695/69696)

GEMT304835USL-SY/SB (69719/69720)

Premium Undershelf Lighting

12-INCH:

GEMT311240USL-SY (84045)

GEMT311230USL-SY (84042)

24-INCH:

GEMT312430USL-SY/SB (69703/69704)

GEMT312440USL-SY/SB (69676/69677)

36-INCH:

GEMT313630USL-SY/SB (69705/69706)

GEMT313640USL-SY/SB (69678/69679)

48-INCH:

GEMT314830USL-SY/SB (69707/69708)

GEMT314840USL-SY/SB (69680/69681)

Refrigerated Horizontal Cases

RH30 Series

BEFORE YOU BEGIN

Read these instructions

completely and carefully.

OPERATING TEMPERATURE

• Minimum is -20°C

• Maximum is 25°C

• Maximum TC Point is 55°C

LED DRIVER COMPATIBILITY

This system is compatible with GE LED Drivers

GEPS6000NCMUL-SY, GEPS6500NCMUL-SY,

GEPS24-100UGL-IP, GEPS6100NCCON-SY.

TC Point Max 55°C

CAUTION/ATTENTION

Risk of injury. While performing installations

described, gloves, safety glasses or goggles

should be worn. / Risque de blessure. Lors

de l'exécution des installations décrites, des

gants, des lunettes de sécurité ou des lunettes

de protection doivent être portées.

Conforms to the following:

• Installation to be performed by factory trained service

personnel only.

• For use inside a commercial refrigeration case with

packaged foods only.

• Use this unit only in the manner intended by the

manufacturer. If you have any questions, contact the

manufacturer.

• Before installing, servicing or cleaning unit, switch

power off at the service panel and follow appropriate

lock out/tag out safety procedures.

FOR YOUR SAFETY

Read and observe all CAUTIONS and WARNINGS shown

throughout these instructions.

WARNING/AVERTISSEMENT

Risk of electrical shock. Disconnect power before servicing or installing product. LED Retrot Kit

Installation requires knowledge of luminaires electrical systems. If not qualied, do not attempt

installation. Contact a qualied electrician. Install this kit only in the luminaires that have the construction

features and dimensions shown in the photographs and/or drawings. / Risque de choc électrique.

Couper le courant avant de réparer ou installer le produit. LED Retrot Kit d’installation nécessite

la connaissance des systèmes luminaires électriques. Si vous n’êtes pas qualié, ne tentez pas

l’installation. Contactez un électricien qualié. Installez ce kit seulement dans les luminaires qui ont les

caractéristiques de construction et les dimensions gurant sur les photographies et / ou des dessins.

Summary of content (6 pages)

PAGE 1
GE Retrofit and OEM Installation Guide Lighting IMMERSION TM LED Display Lighting Refrigerated Horizontal Cases RH30 Series Canopy Lighting Undershelf Lighting 12-INCH: GEMT301250CAN-SY (84050) GEMT301240CAN-SY (84046) GEMT301230CAN-SY (84048) 24-INCH: GEMT302450CAN-SY/SB (69640/69641) GEMT302440CAN-SY/SB (69652/69653) GEMT302430CAN-SY/SB (69682/69684) GEMT302435CAN-SY/SB (69709/69710) 36-INCH: GEMT303650CAN-SY/SB (69642/69643) GEMT303640CAN-SY/SB (69660/69661) GEMT303630CAN-SY/SB (69685/69686) GEMT
PAGE 2
Tools Required Components Required 1 1 2 3 2 3 1 Wire Stripper/Cutter 1 LED Light 2 Screwdriver 3 Cordless drill with driver bit 2 LED Driver 3 L-clip with thumbscrew 4 5 4 6-32 x 1/2" screws 5 Twist-lock splice wire connectors. WARNING/AVERTISSEMENT Risk of fire or electric shock. Luminaire wiring and electrical parts may be damaged when drilling for installation of LED retrofit kit. Check for enclosed wiring and components. / Risque de feu ou électrocution.
PAGE 3
2 Select Installation Position • Select installation position: Canopy Undershelf 2A Undershelf 2B Canopy and Nose Nose WARNING/AVERTISSEMENT Risk of electrical shock. Only those open holes indicated in the photographs and/or drawings may be made or altered as a result of kit installation. Do not leave any other open holes in an enclosure of wiring or electric components / Risque de choc électrique.
PAGE 4
WARNING/AVERTISSEMENT Risk of electrical shock. Ensure that all connection points are sealed for damp location using the appropriate method per the NEC or local electrical code. Risque de choc électrique. S’assurer que les points de raccordements sont scellés pour emplacement humide en employant une méthode permise par le NEC ou par le code électrique local. Wiring Multiple LED Lights Black (line) LED driver Mains In LED Light White (neutral) LED Light LED Light CAUTION/ATTENTION Risk of injury.
PAGE 5
4 Connect LED Driver - Output • For retrofit, place LED driver in the location where the ballast was formerly located. • Driver must be enclosed and located at least 20cm (7in) away from compressor. • Make output (DC) connections using one of the two options below: OPTION 1 - USING 4-WAY CONNECTOR Connect the LED Driver output leads to the LED Light leads using the appropriate mating connector (Molex P/N 39-01-4046).
PAGE 6
7 Prepare for LED Light Positioning • • • • • If installing in the undershelf position, reinstall shelves back into case. Clean away any debris from case. Reconnect power to case. Gently rotate LED Light until optimal light coverage is achieved. Firmly tighten thumb screw to secure the LED light into final position. Rotate LED Light for optimal illumination WARNING/AVERTISSEMENT Risk of electrical shock. Disconnect power to LED Lights before any cleaning operation. Risque de choc électrique.