GE Energy OC 6000e* Distributed Control System – I/O Modules
OC 6000e* Distributed Control System (DCS) – I/O Modules The OC 6000e I/O provides a comprehensive and cost-effective Power supplies can be implemented with 1:1 redundancy. process interface solution. Reliability and flexibility are built into To further ensure continued operation, fail-safe modes can be all aspects of the DCS I/O subsystem to help keep the process programmed for the I/O. For example, modules can be programmed on-line and profitable.
Communications Analog Input Redundant 100 MB Ethernet with IEEE1588, twisted pair or fiber A/D Converter: One per point optic, up to 2 kilometers Channels: 16 Power Requirements Resolution: 24-bit Power Supply Voltage Range: 90-240 VAC, 50/60 Hz Current and Voltage: 0-20 mA, 0-5 V/1-5 V/±5 V/±10 V, or 110/220 VDC 0.1% accuracy over full operating temperature range. Redundancy: 1:1 redundancy optional Thermocouple: 0.
Digital Output Terminations Channels: 16 Type: 24-pin (dual row) and 16-pin (single row) connectors Signal: AC Relay Wire Gauge: 2.5 mm2, two-wire Rating: 250 VAC/10 A Isolation Voltage: 2.21 kV Isolation: Point, 5000 VAC between contact and coil Density: 5.08 mm between pins Length: 24-pin: 62.8 mm (2.47 in), 16-pin: 83.1 mm (3.
