Get installation instructions

16
Installation Instructions
BEFORE YOU BEGIN
Read each step thoroughly before proceeding.
•
CAUTION – Unplug
the Refrigerator. To eliminate
the danger of electric shock during
installation, you must unplug the
refrigerator from its electrical outlet.
WATER VALVE ASSEMBLY INSTALLATION INSTRUCTIONS M
Are these the right instructions for your model? Follow the Installation Instructions indicated by
the label on the back of the refrigerator— or
SRQPNML
Flat blade and Phillips
screwdrivers
Pliers
TOOLS YOU WILL NEED
Sharp knife
1/4″ and 5/16″ Nutdrivers
ATTACH THE WATER VALVE
• Locate the female connector plug. Plug the female
connector (C) onto the male terminals on the water
valve (3). Either wire can go on either terminal.
2
10
For models with one temperature control
(refrigerator) only:
• Fasten the water valve to the cabinet by driving
the hex-head screw (10) from the kit into the hole
in the cabinet leg.
C
3
REMOVE THE COVER
Remove the compressor compartment access cover.
This requires removing screws which attach the cover
to the back of the refrigerator case.
Be sure to save the screws as the access cover must
be reinstalled later to ensure your refrigerator will
function properly.
1
For models with two temperature controls
(refrigerator and freezer) only:
• Fasten the water valve to the bracket inside
the compressor compartment using the two
screws already in the bracket.