Specification

GRF500PV
GE
®
500 Series 30" Free-Standing Electric Range
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
For answers to your Monogram, GE Café
™
, GE Profile
™
or GE Appliances
product questions, visit our website at geappliances.com or call
GE Answer Center
®
Service, 800.626.2000.
Specification Revised 4/23
All GE Appliances ranges are equipped
with an Anti-Tip device. The installation
of this device is an important, required
step in the installation of the range.
Listed by
Underwriters
Laboratories
RECEPTACLE LOCATIONS: Locally approved
flexible service cord or conduit must be used
because terminals are not accessible after range
installation. See shaded area in drawing for
location of electrical outlet box. Recommended
outlet locations allow range to be installed directly
against wall.
NOTE: This appliance has been approved for 0"
spacing to adjacent surfaces above the cooktop.
However, a 6” minimum spacing to surfaces less
than 15" above the cooktop and adjacent cabinet
is recommended to reduce exposure to steam,
grease splatter and heat.
INSTALLATION INFORMATION: Before installing,
consult installation instructions for current
dimensional data and additional requirements.
†NOTE: Check local codes for required breaker size.
KW RATING
240V 12.1
208V 9.1
BREAKER SIZE
240V 40 AMPS†
208V 40 AMPS†
0"
Minimum
to cabinets
below
cooktop
30"
(see note)
0" minimum
to cabinets
above
counter
30"
0" Right side
0
" Left side
Minimum
to side wall
36"
30"
3 1/4"
Wall-mounted
Recommended
6 1/2"
24"
23 3/4"
3 1/8"
Side Wall
Electrical
supply
NOTE: Minimum to bare cabinet above;
see Installation Instructions for alternate
installation configurations.
47
1
⁄
2
"
30"
NOTE: Rear wall to
front of door glass.
25
1
⁄
2
"
w/o handle
10
3
⁄
4
"
35
5
⁄
8
"
to
36
1
⁄
2
"
27
7
⁄
8
"
with handle