Specification

For answers to your Monogram, GE Café
, GE Profile
or GE Appliances
product questions, visit our website at geappliances.com or call
GE Answer Center
®
Service, 800.626.2000.
GGF600AV
GE
®
600 Series Free-Standing Gas Range with Convection and No Preheat Air Fry
Specification Revised 4/23
All GE Appliances ranges are equipped
with an Anti-Tip device. The installation
of this device is an important, required
step in the installation of the range.
Provide adequate clearances between the
range and adjacent combustible surfaces. These
dimensions must be met for safe use of your range.
Allow 30" (76.2 cm) minimum clearance between
burners and bottom of unprotected wood or metal
cabinet, or allow a 24" (61 cm) minimum when
bottom of wood or metal cabinet is protected by
no less than 1/4" (6.4 mm) thick flame-retardant
millboard covered with no less than No. 28 MSG
sheet metal (.015" [.38 mm] thick), .015" (.38 mm)
thick stainless steel, .025" (0.64 mm) aluminum or
.020" (0.5 mm) copper.
Installation of a listed microwave oven or cooking
appliance over the cooktop shall conform to the
installation instructions packed with that appliance.
For island installation, maintain 2-1/2" minimum
from cutout to back edge of countertop and 3"
minimum from cutout to side edges of countertop.
INSTALLATION INFORMATION:
Before installing, consult installation instructions
for current dimensional data and additional
requirements.
ELECTRICAL RATING: 120V, 60Hz, 15A
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
0"
Minimum
to cabinets
below
cooktop
30"
(see note)
18"
30"
16" max
to cabinets
above
counter
6" Right side
6" Left side
Minimum
to side wall
36"
30"
3 1/4"
6 1/2"
24"
14 1/2"
12 3/8"
Side Wall
Gas
and
electrical
supply
NOTE: Minimum to bare cabinet above;
see Installation Instructions for alternate
installation configurations.
36"
to
36
1
2
27
7
8
"
with handle
30"
NOTE: Rear wall
to front of door
glass.
25
1
2
"
w/o handle
47
1
2
"
10
3
4
"

Summary of content (2 pages)