User Manual imagination at work Preparations GE Digital Camera C1433 / Z4300 Basic operation Camera function controls Playback Using the Menus Camera connectivity Appendix
WARNING Do not expose the camera battery pack or other accessories to rain or humidity to prevent fire hazard or electric shock. For customers in the U.S.A. Tested To Comply With FCC Standards FOR HOME OR OFFICE USE This symbol [crossed-out wheeled bin WEEE Annex IV] indicates separate collection of waste electrical and electronic equipment in the European countries. Please do not throw the equipment into the domestic refuse.
SAFETY PRECAUTIONS Camera notes: Do not store or use the camera in the following types of locations: • In the rain, very humid and dusty places. • In a place where the camera can be exposed directly to the sunlight or subject to high temperature, e.g. Inside a closed car in summer. • In a place where the camera is subject to a high magnetic field, e.g. near motors, transformers or magnets.
BEFORE YOU START Preface Thank you for purchasing this GE digital camera. Please read this manual carefully and keep it in a safe place for future reference. Copyright © Copyright 2010 General Imaging Company All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form, by any means, without the prior written permission of General Imaging Company.
• Do not expose the lens to direct sunlight for extended periods. • Download all pictures and remove the batteries from the camera if you are going to store the camera for long periods of time. • Do not use abrasive cleansers, alcohol-based, or solventbased cleaners to clean the camera. To clean, wipe the camera with a slightly damp soft cloth. About this manual This manual provides you with instructions on how to use your GE digital camera.
CONTENTS WARNING . ......................................................................i Setting the Date and Time ............................................ 14 SAFETY PRECAUTIONS .................................................ii Setting the Language .................................................... 15 BEFORE YOU START ..................................................... 1 Preface . ........................................................................................1 Copyright ............
USING THE MODES .................................................... 24 Night Portrait . ................................................................. 30 LCD Screen Display ................................................................. 24 Beach.................................................................................. 30 Still Picture Mode Display ............................................. 24 Text.....................................................................................
Using the Delete Button . ....................................................... 39 USING THE MENUS .................................................... 40 Still Menu . ................................................................................. 40 AF Mode (Auto-Focus mode) . ....................................... 41 Continuous AF .................................................................. 41 Expo Metering (Exposure Metering) ............................ 42 Continuous Shot . .................
Copy to Card (Copy internal memory to memory card) .................................................................. 59 Reset Settings . ................................................................ 60 FW Version (Firmware version) . .................................. 60 APPENDICES ............................................................... 70 Specifications: This product .................................................. 70 Error Messages ...........................................................
GETTING READY Unpacking Your package should contain the camera model you purchased along with the following items. If anything is missing or appears to be damaged, please contact your vendor.
Camera Views Front View 1 2 3 Back View 5 6 7 8 9 4 Right View 10 15 11 14 12 13
Top View Bottom View 18 20 Left View 16 17 22 19 21 1 Flash Lamp 12 Flash Mode/Right Button 2 Timer Indicator 13 Delete Button/Down Button 3 Lens 14 Face Detection/Left button 4 Microphone 15 Function/OK Button 5 LCD Screen 16 USB/AV Port 6 Status Indicator 17 Wrist Strap 7 Zoom Button 18 Shutter Button 8 Playback Button 19 Power Button 9 Menu Button 20 Speaker 10 Mode Selection Button 21 Card Slot/Battery Compartment 11 Disp/Up Button 22 Tripod Socket
Insert the Battery and SD/SDHC Card (Not included) 1. Open the battery compartment. 10 2. Insert the enclosed batteries into the battery slot in the correct direction.
3. Insert an SD/SDHC card (not included) into the memory card slot as shown. 4. Close the battery compartment.
Optional SD/SDHC cards are not included. The use of 64MB to16 GB memory cards from recognized manufacturers such as SanDisk, Panasonic and Toshiba is recommended for reliable data storage. To remove the SD/SDHC card, open the battery compartment and gently push the card to release it. Pull the card out carefully. Turning On and Off Press the Power button to turn the camera on. To turn off the camera, press the Power button again.
Using the Mode Button The GE camera provides a convenient Mode Button that allows you to switch between different modes with ease. Press Left/Right button to choose the mode, press to select. All the available modes are listed as follows: Mode Name Icon Description Auto mode Switch to take still pictures in automatic mode. Panorama mode Switch to capture a sequence of shots and stitch them together into a panoramic photo.
Setting Language and Date/Time The Date/Time and Language setup will automatically appear when the camera is turned on the first time. To set the language, date, and time, go to the following setup options in the Setup menu. • Language • Date / Time To access the Setup menu, do the following: 1. Press Power to turn the camera on. 2. Press the button, switch among the setting menus by using the Left/Right button to select the corresponding basic setting menu. Setting the Language 1.
Setting the Date and Time 1. Use the Up/Down button to select Date/Time. Then press the Right button to enter the setting. 2. Press the Left/Right to highlight each field and use the Up/Down to adjust the value. 3. Press the button to confirm the setting.
About the LCD Screen When you turn the camera on, various icons are shown on the LCD screen to indicate the current camera settings and status. To learn more about the displayed icons, see “LCD Screen display” on page 24. LCD Screen notes: Extremely high-precision technology had been used to manufacture the LCD screen so that most of the pixels are operational for use. However, there may be some minute points (black, white, red, blue or green) that constantly appear on the LCD screen.
BASIC OPERATION Shooting in Auto Mode Using the Zoom Function Auto mode is the easiest mode to take photos. While operating in this mode, the camera automatically optimizes your photos for best results. To start shooting, do the following: Your camera is equipped with two types of zoom functions: optical zoom and digital zoom. Press the Zoom button of the camera to zoom in or out on the subject while taking pictures. Zoom button 1. Press Power to turn the camera on. 2.
Basic Functions Menu The Basic Function Menus of the camera include Flash, Selftimer, Macro Capture, and Exposure Compensation. The suitable function setting can let you shoot better photos. Set the basic functions as per the following steps: 1. Pull up the Basic Function Menus by pressing Right/Flash button. 4.
• • • Flash : Forced off Flash is turned off. Macro Mode • Macro : On Select this to focus on subjects 5cm from the lens. Flash : Slow Synchro This allows you to take pictures of people at night that clearly show both your subjects and the night time backdrop. • Flash : Red-Eye + Slow Synchro Using this mode for slow synchro shots with red-eye reduction. Exposure Compensation Self-timer • Self-time : 2 sec A single picture is shot 2 seconds after the Shutter button is pressed.
Advanced Functions Menu The Advanced Functions Menu of the camera include Image Size, Image Quality, White Balance, Image Color and ISO etc. The suitable function setting can let you shoot better photos and videos. Set the advanced functions as per the following steps: 1. Pull up the Advanced Function Menus by pressing button. 4.
WB (White Balance) ISO The White Balance allows you to adjust the color temperature under different light source to ensure faithful color reproduction. The ISO function allows you to set the sensitivity of the camera sensor based on the brightness of the scene. To improve the performance in darker environments, a higher ISO value is required. On the other hand, a lower ISO value is needed when in bright conditions. Pictures at higher ISO will naturally have more noise than those at lower ISO.
Quality Size The quality setting adjusts the compression ratio of the images. Higher quality settings give better photos, but will take up more memory space. The size setting refers to the image resolution in pixels. A higher image resolution allows you to print that image in larger sizes without degrading the image quality.
Color The color setting allows you to add artistic effects directly when taking pictures. You can try different color tones to alter the mood of your pictures.
USING THE MODES LCD Screen Display Still Picture Mode Display 1 Shooting Mode Icons Mode: 1 2 3 4 5 6 7 Auto mode Scene mode Stabilization mode Portrait 8 Panorama mode 9 16 10 15 2 AF Mode Single-AF 14 11 Multi-AF 3 Expo Metering 13 12 Spot Center 17 18 19 20 21 AiAE 4 Image Size 5 Image Quality 24
6 Remaining number of pictures 7 Memory card/built-in memory 21 Flash Mode Flash : Auto 8 Battery Status 9 WT Ratio (Displayed only when zoom is activated) 10 Zoom 11 Exposure 12 ISO Value 13 Histogram 14 Focus Frame 15 Continuous Shot 16 Smile face detection enabling icon Flash : Red-eye reduction Flash : Forced flash Flash : Forced off Flash : Slow Synchro Flash : Red-Eye + Slow Synchro 17 Picture Color 18 White Balance 19 Macro Mode 20 Self-timer Self-time : 2-sec Self-time : 10-sec 25
Video Shooting Mode Display 4 Video Quality 5 Focus Frame Mode : 6 Self-timer 1 2 3 4 5 6 7 8 9 Self-time : 10-sec 7 Remaining Time for Video Recording 10 13 11 8 Memory Card/Built-in Memory 9 Battery Status 10 WT Ratio (Displayed only when zoom is activated) 12 11 Zoom 12 Exposure 13 Recording Status Icon Recording standby 1 Video Mode icon 2 Continuous AF Single-AF 3 Metering Spot Center AiAE 26 Recording For optimal video shooting, it is recommended that the SD card be used.
Playback mode display 1. Play Mode icon 2. DPOF file Mode: 3. File protection 4. Picture Number 1 2 3 4 5 5. Memory Card/Built-in Memory 6 6. Battery Status 7. Image Zoom 7 8. The current display area 9. Affecting regional 10. Memory Space (this picture/Total number of pictures) 8 9 12 11 11. Recording Date and Time 12.
Panorama mode Panorama Mode allows you to create a panoramic picture across a distant scene. The camera will automatically compose a panoramic picture using the individual shots that you take. Follow these steps to create a panoramic picture: 1. Turn the mode dial to the Panorama Mode. Then enter the Photo Setup to Select either Auto Stitching or Manual Stitching (Please refer to Page 40 to enter the Still Picture Menu.) 2.
Scene mode In Manual Scene mode, you can select from a total of 20 scene types to match your needs. You just need to select the right scene for the occasion and the camera will automatically adjust to the optimal settings for you. Press the button, select the Scene Mode menu with the Left/Right button, and the LCD screen will show the figure as below. Select a scene using the Left/Right button and press the button.
Sport Leaf For fast-moving subjects. Capture sharp action shots without blur. For plants. Capture brilliant shots of greenery and blossoms. Indoor For sunsets. Capture subjects in strong sunlight. For indoors. Reduce blur and improve color accuracy. Snow For snow scenes. Reproduce natural and clear white scenes. Sunset Glass For objects behind transparent glass. Landscape Fireworks For landscapes. Vivid reproduction of green and blue. For fireworks at night.
ID For shooting certificates clearly. Fish eye For increasing interesting fish eye effect for shooting. Expand the centeral part intentionally to get distortional photo similar as watching through fish eye. Travel shooting For shooting fast moving object clearly with clear main body and flowing sense of background. Photo frame For adding interesting frame. Sketch For taking photos with pencil sketch effect. 1. After selecting the scene type, press the activate. button to 2.
Stabilization mode This mode can help reduce photo blur caused by hand shake, low light and slow shutter speed Use stabilization mode in dark environments or when in slow shutter speed Shooting in a windy or unstable environment (such as a moving vehicle) may cause blurred images.
Face Detection Face Detection is enabled function under normal state. In the Shooting mode (except for Panorama Mode/Movie Mode), Face Detection is enabled function under normal state, used to recognize faces and focus automatically to make them clearer. Blink Detection Eyes Closing Detection is enabled function under normal state. When shooting, if human face is detected with eyes closed, the eyes closing icon ( ) will display on the screen as prompt.
Smile Detection With the camera's new "Smile Detection" feature, which automatically detects and captures a person smiling, you'll never miss a smile. 1. In the Shooting Mode, press the Left/Smile Face Detection button to turn on the Smile Face Detection function and the icon ( ) appears on the LCD 2. Point the camera at the subject until the subject's face is detected and bracketed by a square box. Press the Shutter button all the way down and release the Shutter button.
PLAYBACK Viewing Photos and Videos To view the captured photos and video clips on the LCD screen: 1. Press button to go to the Playback mode. The last recorded photo or video clip is displayed. 2. Use the Left/Right navigation buttons to scroll through the photos or video clips stored in the internal memory or memory card. 3. To play a selected video clip, press the the movie playback mode. 6 button to enter During video playback, the operating instructions will appear on the screen.
During video playback, you can press the Up/Down button to adjust the volume.
Thumbnail View When in Playback mode, press one end of the Zoom button ( ) to display the thumbnail of photos and videos on the screen. 1. Use the Zoom button to switch between the 3x3, and 4x4 and Date Folder thumbnail display. 4. Use Up/Down/Left/Right button to select a picture or video clip, press button to return to the original size. 2.
Using Zoom Playback (for still pictures only) The zoom buttons can also be used during playback. This allows you to magnify photos up to 2 ~ 8X. 1. Press button to go to the Playback mode. 2. Use the Left/Right navigation buttons to select a photo to magnify. 3. Press one end of the Zoom button ( ) to zoom in. 4. Use the Zoom buttons to zoom in and out. The zoom indication and the frame of the whole photo shall display on the screen. 38 5. Use the navigation buttons to pan across the image. 6.
Using the Delete Button In Playback Mode, you can press the Down/Delete button to delete pictures or videos. To delete pictures or videos: 1. Press button to go to the Playback Mode. 2. Select a picture or video clip you want to delete with the Left/Right button. 3. Press the Down/Delete button and the delete screen appears. 4. Select Yes or Back with Up/Down button and press the button for confirmation. Erased photos/video clips cannot be recovered.
USING THE MENUS Still Menu Mode: In any of the above Still Picture Modes, press the go to the Still Picture menu. button to To adjust each setting: 1. In the Still Picture menu, switch between different Photo Setup or Camera Setup pages using the Left/Right button, to select the page with the function you want to adjust and press the Down button. 4. Press Up/Down button to select an option or press the Left or button to return to the menu. 5. Press the button for confirmation and exit the menu.
AF Mode (Auto-Focus mode) Continuous AF Use this setting to control the auto-focus mechanism while taking pictures. After Continuous AF is turned on, the camera will adjust focus automatically in response to any camera or subject movement. Two options are available: • Single-AF: The focus frame appears on the center of the LCD screen to focus on the subject. • Multi-AF: The camera automatically focuses the subject in a wide area to find the focus point.
Expo Metering (Exposure Metering) Continuous Shot Use this setting to select an area for the exposure to be obtained. Use this setting to perform continuous shooting. Once in this mode, you must continuously hold down the Shutter button to use this function. Three options are available: • Spot There are five available options: • Center • OFF: Turn off Continuous Shot function.
• Time-Lapse: Automatically capture pictures in a predefined interval. The flash is designed not to work in this mode in order to enable quick succession of shots. Quick Review This setting refers to the quick photo review immediately after taking a picture. The picture stays on the LCD screen for an adjustable period of time. Date Imprint Include a Date/Time stamp in the photo image.
Digital Zoom Use this setting to enable or disable the digital zoom function. When disabled, only the optical zoom is enabled.
Movie Menu Mode: In the Movie Mode, press the sponding Movie menu. button to go to the corre- To configure each setting: 1. In the Movie menu, switch between the Movie Setup or different Camera Setup pages using the Left/Right button, select the page with the function you want to adjust and press the Down button. 3. Press the Up/Down button to select an option or the Left or button to return to the menu. 4. Press the button for confirmation and exit the menu.
Continuous AF Expo Metering (Exposure Metering) After Continuous AF is turned on, the camera will adjust focus automatically in response to any camera or subject movement. Set metering mode for various lighting conditions.
Playback Menu Protect Mode : In Playback mode, press the menu. button to enter the Playback Please refer to the following sections for detailed instructions on the various menu options. To prevent any pictures or videos from being accidentally erased, use this setting to lock one or all of the files. To protect/unprotect a picture or video: 1. Press button and find the picture or video you want to protect by using Left/Right button.
3. Use the Up/Down button to select One to lock the selected picture or video, or select All to protect all pictures/videos stored in the built-in memory or memory card. Delete There are three ways to delete files. button to select Yes to lock. For locked 4. Press the picture/video, use Unlock option to unlock it. 5. A key ( ) icon will appear on the top of the screen to indicate that the picture/video is protected. 6.
DPOF (Digital Print Order Format) • Delete All: 1. In the Delete option, select All and then press button. 2. Use Up/Down button to select Yes to delete all files, or select Back to return to the menu. • Delete Date Folder: 1. In the Delete option, press Folder.
Trim Resize The Trim setting allows you select an area of the photo you want to keep and then save it as a new photo. This setting allows you to resize a picture to a specified resolution, and saves it as a new picture. To trim a picture: 1. Select the Resize setting from the Playback menu as described previously. 1. Select the Trim setting from the menu. 2. Using the Left/Right buttons, locate the photo that you want to crop and have it displayed on the LCD. 3.
If the message “The image cannot be edited.” appears, it means that the current image cannot be resized. Rotate You can use this setting to change the picture orientation of the picture. 1. Select the Rotate setting from the Playback menu as described previously. 2. Use the Left/Right navigation buttons to select a picture to rotate. Red-eye Reduction Use this setting to remove red-eyes in your photos. 1. Select the Red-eye Reduction in Playback menu as described previously. 2.
Display Setup Slideshow Mode: Press menu. button in Playback mode to enter Display Setup This setting allows you to view all the stored pictures as a slideshow. 1. Select the slideshow menu, press the right button to enter the options menu. 2. Use the Up/Down navigation buttons to select Effect, Interval time, or Repeat and use the Left / Right navigation buttons to adjust the setting. Refer to the following sections for details of every setting. 3.
Wallpaper Settings Menu Wallpaper: Use this setting to select your favorite picture to use as a background on the LCD screen. Use Up/Down button to select the Menu Wallpaper option, press button to confirm or press Left button to return to 1. Press Down button to select the Wallpaper Setting menu. last page, and press 2. Press Right button, and the camera will enter the Wallpaper Setting interface. to exit the menu.
Welcome wallpaper: Set back to defaults: Use Up/Down button to select the Startup Screen option, press to confirm or press Left button to return to last page, and Use Up/Down button to select Set back to defaults, press to confirm or press Left button to return to last page, and press to exit the menu. press 54 to exit the menu.
Setup Menu Mode : The Setup menu for the camera is available in all modes. Each menu page can be selected by pressing the button and switching between menus with the Left/Right button. 2. Switch between different functions with the Up/Down button. 3. Press the Right button to enter the submenu. After selecting a function option, you can press the Up button to return to the menu for other Camera Setup pages. Or you can press the Down button to switch to the next menu page.
Beep LCD Brightness Use this setting to adjust the volume of beep when buttons are pressed and change the tones for Shutter button, self-timer, and power-on/power-off. Use this setting to adjust the brightness of your LCD screen. To change this setting: 2. Select auto or adjust the brightness level using the Left/Right button, and press the button to confirm the setting. 1. Select the Beep setting from the Setup menu as described previously. 2.
Power Saver This setting allows you to save power and get the maximum possible running time for your battery. Follow the steps below to turn off the LCD screen and camera automatically after a period of inactivity. 1. Select the Power Save setting from the Setup menu as described previously. 2. Press the Up/Down button to select the power items for the screen and camera and press the Right button. • LCD Off : ON, 30 sec, 1 min, 2 min. • Camera Off : ON, 3 min, 5 min, 10 min. 4.
File and Software Format Memory Please note: formatting enables you to delete all contents in the memory card and built-in memory, including protected photo and movie files. To use this setting: 1. Select the Format in File and Software menu. Date/Time See “Setting the Date and Time“ section on page 15. 2. Use the Up/Down navigation buttons to select Yes or No. Then press the button to confirm. Language See “Setting the Language“ section on page 14. 3. The current media is formatted.
File Numbering After you take a picture or video clip, the camera will save it as file that ends with a serial number. You can use this item to choose whether the file is serially numbered or begins with 1 and is saved in another folder on the memory card. Copy to Card (Copy internal memory to memory card) Use this setting to copy the files stored in the internal memory to the memory card. 1. Select the File Name in File and Software menu. 1. Select the Copy to memory card in File and Software menu. 2.
Reset Settings FW Version (Firmware Version) Use this setting to restore the camera to its default settings. Use this setting to view the current camera firmware version. 1. Select the Reset setting in File and Software menu. 1. Select the FW Version in File and Software menu. 2. Use the Up/Down navigation buttons to select Yes or No. Then press the button to confirm. 2. If SD card contains a new version of firmware, please upgrade accordingly as necessary.
Transmission Video System Use this setting to determine your video system in the current area. 1. Select the Video System in Connection Setup menu. 2. Use the Up/Down navigation buttons to select NTSC or PAL. Then press the button to confirm. The video output signal can be switched to NTSC or PAL to accommodate different regional standards. The appropriate setting will vary between regions. NTSC: USA, Canada, Taiwan, Japan, etc. PAL: Europe, Asia (excluding Taiwan), Oceania, etc.
Connecting to a PC Use the USB cable and ArcSoft software (CD-ROM) supplied with your camera to copy (transfer) pictures to a computer. Setting the USB mode Since the camera’s USB port can be set to connect with either a PC or a Printer, the following steps will allow you to ensure that the camera is correctly configured to connect with a PC. 1. Go to the camera setting menu, select USB connection with the Up/Down button, and press the Right button. 2. Use the Up/Down navigation buttons to select PC. 3.
Windows operating system (Windows 2000, Windows XP, Windows Vista, Windows 7.) Click the [Safely remove the hardware] icon and remove the USB connector according to the appeared menu. 5. Disconnect the camera once transfer is completed. Macintosh Drag the untitled icon to the Trash. ("Untitled") If the USB option is set to [PC] : Turn the camera off and disconnect the USB cable.
Connecting to a PictBridge Compatible Printer PictBridge allows printing images from a memory card in a digital camera directly to a printer, regardless of brand. To find out if a printer is PictBridge compatible, simply look for the PictBridge logo on the packaging or check the manual for specifications.With the PictBridge function on your camera, you can print the captured photos directly with a PictBridge compatible printer using the supplied USB cable, without the need for a PC. 3.
Connecting the camera and printer. 1. Make sure both the camera and printer are turned on. If the camera is not connected to a PictBridge compatible printer, the following error message appears on the LCD screen. 2. Connect one end of the supplied USB cable to the USB port on your camera. 3. Connect the other end of the cable to the USB port on the printer.
Using the PictBridge Menu After setting the USB mode to Printer, the PictBridge menu appears. Print with date If you have set the date and time of your camera, the date and time will be recorded and saved with each photo you take. 1. Select Print with date from the PictBridge menu. The following screen appears. Select a menu item with the Up/Down button and press the Right button or button to enter the item. Refer to the following sections for more detailed information on each setting. 66 2.
3. Use the Up/Down navigation buttons to select the number of prints for the current displayed photo. 4. Press the button and the following screen appears. Print without date Use this setting to print the photos without dates on them. 1. Select Print without date from the PictBridge menu. The following screen appears. 5. Select Yes to confirm the printing, or Cancel. Then press the button. 2. Use the Left/Right navigation buttons to scroll through the images. 3.
5. Select Yes to confirm the printing, or Cancel. Then press the button. Print index You can use this setting to print all indexes to show all the photos currently in your camera. 1. Select Print index from the PictBridge menu. The following screen appears. 68 2. Select Yes to confirm the printing, or Cancel. Then press the button.
Print DPOF (Digital Print Order Format) Exit To use DPOF printing, you must make the selection of photos for printing using the DPOF settings before hand. See “DPOF” section on page 49. To exit the PictBridge menu, select Exit. The “Remove USB cable” message will be displayed. 1. Select Print DPOF from the PictBridge menu. The following screen appears. Disconnect the USB cable from the camera and printer. 2. Select Yes to confirm the printing, or Cancel. Then press the button.
APPENDICES Specifications : This product Design and specifications are subject to change without notice. Effective Image Sensor Pixels 14.1 Megapixels Image Sensor 14.4 Megapixels [1/2.3” (CCD)] Lens 70 Focal Length F = 5.2mm (Wide) ~ 15.6mm (Tele) 35mm film equivalent 29mm (Wide) ~ 87mm (Tele) F number F3.5 (Wide) ~ F6.
Number of Recording Pixels Still Image 14MP, 12MP(3:2), 10MP(16:9), 8MP, 5MP, 3MP, 0.3MP Movie 640x480pixels: 30fps/15fps, 320x240pixels: 30fps/15fps Image Compression Best, Fine, Normal DCF, DPOF (Ver1.1) Support Yes File Format Still Image Exif 2.2 (JPEG) Movie Quick Time Motion JPEG, Audio: G.
72 Pan-Capture Panorama Yes LCD Display 2.
Internal Flash (Shooting Range) Auto/Red-Eye Reduction/Forced Flash/No Flash/Slow Synchro/Red-Eye Reduction+Slow Synchro Shooting Range Wide: Approx. 0.3m~4.4m / Tele: Approx. 0.5m ~ 3.4m Recording Media Internal Memory: 18MB SD Card/SDHC Card (Up to 16GB support) Other Features PictBridge, ExifPrint Support, Multi-language Sup port Jacks USB2.
Error messages Messages Explanation No card • The memory card is not inserted. Card error • The memory card is not formatted. Card full • The memory card is full and cannot store any new images. Write protect • The memory card is write-protected. Picture error • The picture is not captured correctly. • The picture is damaged. 74 No picture • There are no images in the memory card or in the internal memory. Lens error • The lens is probably stuck and the camera will power off automatically.
Messages Explanation When the camera is used for longer than the specified time it may be damaged. • During underwater recording or shooting, the camera was kept under water longer than the specified time. Card is not formatted, format? • Confirm whether the memory card should be formatted. This image cannot be deleted • The picture or video you are trying to delete is protected. Cannot record movie • The write protection switch in the memory card is set to the “LOCK” position.
Troubleshooting Problem Camera does not turn on. Possible causes • The battery has run out. Solution • Replace with a fully charged battery. • The battery is not inserted correctly. Camera turns off suddenly during operation. • The battery has run out. • Replace with a fully charged battery. The picture is blurred. • The lens is dirty. • Use a soft cloth to clean the lens on your camera • appears when taking pictures. Images and video files cannot be saved. • The memory card is full.
Problem No picture is taken when pressing the Shutter button. Images cannot print from the connected printer. Possible causes • The memory card is full. • No available space to store the files. Solution • Replace the memory card with a new one or clean off current memory card. • Delete unwanted images. • The mode dial is in Playback mode. • The memory card is locked. • The camera is not connected to the printer correctly. • Check the connection between the camera and printer.
http://www.ge.
