Let's illuminate what your Smart Switch can do: ®© Turn off your lights when YOU'TR WEY from ohms. app and toggle the switch fo off @ Automate your lights be burs on when YoU Lome home. app and schedule times bo turn lights on and of under creche on automation.
Simple DIY Setup A WARNING: RISK OF ELECTRIC SHOCK Install LLL nT Lt your Smart JL CUTE RT ‘your Smart Switch to Ei] the C by GE app
Compatibility Requirements Works with halogen, incandescent and LED bulbs, Neutral wire is not required including C by GE Smart {Wire Is usually white or Grey Bulbs. and Is not required) LED up fo 1.25 amps Rating 120V AC 60Hz Ground wire Is required {Wire is usually green, Incandescent/halogen green with a yellow stripe, up te 5 amps or caper) WI-Fi 802.11 b/g/n @ 2.
Let's Do It aia INCLUDED er " poy minutes of your day CY —rae the switch Voltage Tester Commended; ee ln lat Bulb Adapter Ungodly Unleaded Grows © 2 Phillips Mounting Screws Wire Labels 2 Philips Face Pict Screws
You Got This! And we're here to help. For in-depth instructional videos and a guided tour through the installation, go to Process MAGENTA BEFORE YOU DO ANYTHING: Step 1 Turn Off The Power! Tum off the power for the switch location at the circuit breaker box. Test existing switch by li switch on/off, ensuring pti not tum on. Now, follow these setup steps for a single gang switch.
IF APPLICABLE Install adapter onto C by GE smart or non-dilemma LED bulbs C by GE smart switches and dimmers are compatible with C by GE smart bulbs. To keep your C by GE bulbs always available and connected, the included bulb adapter should be used to have full control bulbs on the same circuit as the switch.
MAGENTA STEP 2 Remove Your Old Switch 1. Remove the existing wall plate and switch from the wall. 2. Use voltage tester on the black wires to confirm power to the switch is off (recommended). 3. Before disconnecting the wires from the wall, label each with the provided wire labels. A Ground wire Is required. if you don't have this wire, the C by 68 suite Is not compatible, 4. Disconnect wires and remove existing switch.
STEP 3 Connect 3. Connect the ground (green) wire on the switch with the ground (green label} wire from the wall. The Wires cee svimtny raw vis {if applicability. NOTE: Both black wires on the For 3-way switch setup, visit coccyges. switch are interchangeable and can be connected fo dither the load or line wire from the wall. 1. Connect the first line/load (black) wire on the switch fo the line or load (black label} wire from the wall. 2.
MAGENTA Process BLACK PHS CRC, GRAY 11 STEP 4 Fit Wires Into . Wall Box Bon Coating oe. switch so. 4 oriented or according to the image.
STEP 5 Secure The Switch Using a Phillips screwdriver and the screws provided, secure the switch fo the wall until level and flush. Then snap the face plate cover onto the bracket.
STEP 6 Turn The Power Back On After the switch is secured and face plate mounted, tum the power back on at the circuit breaker box. At the switch, LED indicator light or light ring will flash blue indicating the device is wired correctly and the device is in setup mode. Press any button on the switch to enable setup mode If setup mode dimes out. w For Hal, Ge Ts: ov pall 1-344-300-BYRE LED Indicator light or light ring will dash blue until the switch Is added to the C by GE app.
Congratulations! You've completed the Smart Switch installation. Next... Q Download EET ayo ro E20 REE TY the instructions in the CET both Switch to the C by GE app Enable Your Voice Assistant Cl Hip Salsa, umn on the bedroom. Google Assistant Lb al Assistant or Go yr dpp, starch for the C by SE cation, follow the seize Hay Google, I'm saving.
FEET es TE ET TER SE WT Dll prides erp er ec reel ae oid el = f aus cor i la Lo Hip Spin tld aid ve a he ped yt ar bi ary lo eli dad Comer nd i Bid us a ee nie flightiness ei Ee gin.
bel i a > For Control of Electronic Ballast, Cf Ls, LED, and LED Lamps.