Digitally signed by A. Creery cn=A. Creery, c=US Date: 2002.02.11 13:16:08 -05'00' Reason: I am approving this document 5.5x8.5" 16 pg.; English/Spanish; black ink; no bleed; saddlestitch; flip. 840097600 Ev00 2/11/02 8:47 AM Page 1 g Iron Important Safeguards ............................ 2 Know Your Iron........................................ 3 Using Your Iron........................................ 4 Fabric Setting Chart................................ 5 Caring for Your Iron.........................
840097600 Ev00 2/11/02 8:47 AM Page 2 IMPORTANT SAFEGUARDS When using your flatiron, basic safety precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING 1. Use iron only for its intended use. 2. To protect against risk of electric shock, do not immerse the iron in water or other liquids. 3. The iron should always be turned to OFF before plugging or unplugging from outlet. Never yank cord to disconnect from outlet; instead, grasp plug and pull to disconnect. 4.
840097600 Ev00 2/11/02 8:47 AM Page 3 Know Your Iron Parts and Features Automatic Shutoff Reset 1 Button and Light 2 Spray/Blast 3 3 4 Water Tank Opening 5 Spray Nozzle 11 1 2 Adjustable Steam Switch 4 10 5 6 Water Window 9 7 Temperature Control Dial 8 Soleplate 9 Power On Light 10 Heel Rest 11 Cord 6 7 8 12 Quick Storage Shield 12 Before First Use • Steam vents should be cleaned before first use.
840097600 Ev00 2/11/02 8:47 AM Page 4 Using Your Iron To Dry Iron 1. Plug iron into outlet. 2. Set the Adjustable Steam Switch to O (the Dry Iron position). 3. Turn Temperature Control Dial to desired temperature. Allow two minutes for iron to reach desired temperature. 4. To turn iron Off, turn Temperature Control Dial to Off and unplug iron. To Steam Iron 1. Unplug iron. Using a cup, slowly pour 6 ounces Opening (3⁄4 cup) of tap water into water tank opening. Do not fill iron directly from the faucet.
840097600 Ev00 2/11/02 8:47 AM Page 5 Fabric Setting Chart Steam Range O Dry Iron Steam Setting Temperature Setting Ironing Instructions Off Nylon, Acrylic Dry iron using spray if necessary. Silk Dry iron on the wrong side of the fabric. Wool Use a press cloth and steam iron on the wrong side of fabric. Polyester Iron while fabric is still damp. Rayon Iron using spray if necessary. Cotton, Linen For cotton, iron while still damp or use spray. For linen, iron fabric on wrong side.
840097600 Ev00 2/11/02 8:47 AM Page 6 Optional Features Adjustable Steam Switch – This switch provides minimum steam for wool or maximum steam for linen. Set the switch to O to change to Dry Iron. Spray and Blast of Steam Buttons – Push Blast Button for an Blast Spray extra blast of steam. Push Spray Button to release a fine spray of water for difficult wrinkles in cotton or linen. Power On Light – This light comes on when the iron is plugged in and remains on until the iron is unplugged.
840097600 Ev00 2/11/02 8:47 AM Page 7 Troubleshooting PROBLEM Things TO CHECK Iron won’t heat. • Is the iron plugged in and the outlet working? Check the outlet by plugging in a lamp. • Is the Temperature Control Dial turned to a fabric setting? • If auto shutoff model, is the Reset Light illuminated? If not, push to reset. Water is leaking out of the iron. • Do not overfill the water tank.
40097600 Ev00 2/11/02 8:47 AM Page 8 Customer Assistance If you have a claim under this warranty, please call our Customer Assistance Number. For faster service please have model, series, and type numbers ready for operator to assist you. These numbers can be found on the heel rest of your iron. MODEL: ________________ TYPE: _________________ SERIES: __________________ Customer Assistance Number 1-877-207-0923 Keep this number for future reference! E-mail inquiries: www.gehousewares.
840097600 Sv00 2/11/02 8:49 AM Page 1 g Salvaguardias importantes .................. 2 Conozca su plancha .............................. 3 El uso de su plancha.............................. 4 Tabla de graduaciones de las telas .............................................. 5 Plancha El cuidado de su plancha .................... 5 Propiedades opcionales ...................... 6 Localización de fallas............................ 7 Asistencia al cliente..............................
840097600 Sv00 2/11/02 8:49 AM Page 2 SALVAGUARDIAS IMPORTANTES Cuando use su plancha de hierro, es importante seguir todas las precauciones de seguridad básicas que incluyen lo siguiente: LEA TODAS LAS INSTRUCCIONES ANTES DE USARLA 1. Use la plancha solamente para la aplicación indicada. 2. Para protegerse contra el riesgo de choque eléctrico, no sumerja la plancha en agua ni en ningún otro líquido. 3. Siempre se debe apagar la plancha (OFF) antes de enchufarla o desenchufarla del tomacorriente.
840097600 Sv00 2/11/02 8:49 AM Page 3 Conozca su plancha Piezas y características 1 Cierre automático, botón de reposición y luz 2 Rocío/chorro 4 11 1 2 3 Interruptor de vapor regulable 3 Abertura del tanque de agua 5 Boquilla rociadora 6 Ventana de agua 4 10 5 9 7 Cuadrante de control de temperatura 8 Placa de base 9 Luz de encendido 10 Talón de apoyo 6 7 8 11 Cordón 12 Revestimiento para almacenaje rápido 12 Antes del primer uso • Antes de usar la plancha por primera vez, es important
840097600 Sv00 2/11/02 8:49 AM Page 4 El uso de su plancha Cómo planchar en seco 1. Enchufe la plancha en el tomacorriente. 2. Coloque el Interruptor de Vapor Regulable en la posición O (posición de planchado en seco). 3. Coloque el Cuadrante de Control de Temperatura en la temperatura deseada. Espere dos minutos hasta que la plancha alcance la temperatura deseada. 4. Para apagar la plancha, gire el Cuadrante de Control de Temperatura a la posición apagada (Off) y desenchufe la plancha.
840097600 Sv00 2/11/02 8:49 AM Page 5 Tabla de graduaciones de las telas Graduación de vapor Graduación de temperatura Instrucciones de planchado Gama de Vapor O Seco Apagado Nilón, Acrílico Planchado en seco usando rocío si es necesario. Seda Planchado en seco del lado inverso de la tela. Lana Use un paño de planchar y planche con vapor del lado inverso de la tela. Poliéster Planche mientras la tela está aún húmeda. Rayón Planche usando rocío si es necesario.
840097600 Sv00 2/11/02 8:49 AM Page 6 Propiedades opcionales Interruptor de Vapor Regulable – Este interruptor pro-porciona vapor mínimo para lana o vapor máximo para hilo. Coloque el interruptor en O para ambiar a Planchado en Seco. Botones de Rocío y Chorro de Vapor – Chorro Rocío Presione el Botón de Chorro para un chorro adicional de vapor. Presione el Botón de Rocío para soltar un rocío fino de agua para planchar arrugas difíciles en prendas de algodón o hilo.
840097600 Sv00 2/11/02 8:49 AM Page 7 Localización de fallas PROBLEMA Elementos que SE DEBEN CHEQUEAR La plancha no se calienta. • ¿Se ha enchufado la plancha y funciona el tomacorriente? Chequee el tomacorriente enchufando una lámpara. • ¿Se ha colocado el Cuadrante de Control de Temperatura en una graduación para tela? • Si es un modelo de cierre automático, ¿está la Luz de Reposición iluminada? Si no lo está, presione para reposicionar. Hay una fuga de agua desde la plancha.
840097600 Sv00 2/11/02 8:50 AM Page 8 Asistencia al cliente Si desea hacer un reclamo bajo esta garantía, sírvase llamar a nuestro Número de Asistencia al Cliente. Para un servicio más rápido es importante que tenga el modelo, la serie y los números del tipo listos para que el operador lo pueda ayudar. Estos números se pueden encontrar en la parte inferior de su plancha.