TDS

ManualsBrandsGE ManualsCaulkAdvanced Silicone 2 10.1 oz. Clear Exterior/Interior Window and Door Sealant

Product Data Sheet

Page 1 of 6

(1) Based on comparison of exibility performance with ASTM C-920 Class 25 consumer sealant

(2) Based on comparison with our GE Silicone 1* sealant using ASTM C794 Peel Adhesion test

(3) Exposure to rain or water possible in as little as 30 minutes with bead size max

/16”, temperature min 65°F and humidity

min 50%. Otherwise, sealant should not be exposed to water for 8 hours. Do not touch or clean caulk for 24 hours

(4) Cured sealant is resistant to stain-causing mold & mildew. Regular cleaning of sealant is required, however, as soap and

other residue can cause secondary mold and mildew growth

(5) For wet surface application, wipe o excess water before applying

* Silicone 1 and Silicone 2 are trademarks of Momentive Performance Materials Inc.

Advanced Silicone 2* Window & Door Sealant

Product Description

Advanced Silicone 2 Window & Door sealant is 100% waterproof and can be exposed to rain or

water in as little as 30 minutes. It is ideal for weatherproong and application on a wide range of

projects exposed to harsh weather conditions. This high-performance sealant is permanently

exible, shrink proof, crack-proof, and oers strong adhesion to many common substrates. It has

10-year mold free product protection, is low in odor, and will not blemish most metal nishes. From

new construction to renovations, window and door installations to general weather sealing, versatile

and proven Advanced Silicone 2 Window & Door sealant oers a durable yet highly exible seal.

Backed by a lifetime guarantee.

Product Attributes

• Meets ASTM C-920 Class 35 specications

• 40% more exibility than Class 25 sealants

(1)

• 5X stronger adhesion

(2)

• 30-minute rain & water ready

(3)

• 100% silicone is 100% waterproof and 100% weatherproof

• Resist mold

(4)

with 10-year mold-free product protection

• Will not blemish most high-end metal nishes such as chrome, bronze and nickel

• Will not break down due to extreme weather conditions, freeze & sun-proof

• Shrink & crack-proof

• Excellent adhesion for wet or dry surface applications

(5)

• Freeze/thaw stability

• Non-paintable

Summary of content (6 pages)

PAGE 1
Product Data Sheet Advanced Silicone 2* Window & Door Sealant Product Description Advanced Silicone 2 Window & Door sealant is 100% waterproof and can be exposed to rain or water in as little as 30 minutes. It is ideal for weatherproofing and application on a wide range of projects exposed to harsh weather conditions. This high-performance sealant is permanently flexible, shrink proof, crack-proof, and offers strong adhesion to many common substrates.
PAGE 2
Product Data Sheet Basic Uses Advanced Silicone 2* Window & Door sealant is used in a wide variety of applications including, but not limited to windows, doors, siding, trim, vents, asphalt, cement, brick, mortar, and attic/basement applications.
PAGE 3
Product Data Sheet Typical Properties Typical physical property values of Advanced Silicone 2* Window & Door sealant as supplied and cured are set forth in the tables below. Typical Properties – Supplied Property Value Test Method Consistency Paste VOC (ex. water & exempt) < 28 g/L CARB Chem Curing (n.a.) VOC < 3.0 wt% Odor Light Ammonia Work Life (tooling time) 5-10 minutes Tack Free Time (@ 72°F (22°C), 50% RH) 30 minutes Rain-Ready 30 minutes Sag/Slump < 0.
PAGE 4
Product Data Sheet Masking The use of masking tape is recommended where appropriate to ensure a neat job and to protect adjoining surfaces from over-application of sealant. Masking tape should be removed immediately after tooling the sealant and before the sealant begins to skin over (tooling time). Instructions 1. R emove dirt, grease, moisture, soap residue & old caulk from area to be sealed. Use backer rod for gaps larger than 1/2” x 1/2” (12.7mm x 12.7mm)1). 2.
PAGE 5
Product Data Sheet Specifications Meets ASTM C-920, Type-S, NS, Class 35, Use G Test Requirements. Meets ASTM C-920, Type-S, NS, Class 25, Use NT, M, G, A & O Test Requirements.
PAGE 6
Product Data Sheet Customer Service Centers Americas +1 (866) 275-4372 Email: askgesa@momentive.com Visit us at www.GEsealants.com THE MATERIALS, PRODUCTS AND SERVICES OF MOMENTIVE PERFORMANCE MATERIALS INC. AND ITS SUBSIDIARIES AND AFFILIATES (COLLECTIVELY “SUPPLIER”), ARE SOLD SUBJECT TO SUPPLIER’S STANDARD CONDITIONS OF SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES AGREEMENT, PRINTED ON THE BACK OF ORDER ACKNOWLEDGMENTS AND INVOICES, AND AVAILABLE UPON REQUEST.