TDS

ManualsBrandsGE ManualsCaulk10.1 oz. Silicone 1 White All-Purpose Caulk

Product Data Sheet

Page 1 of 6

(1) Cured sealant is resistant to stain-causing mold and mildew. Regular cleaning of sealant is required, however, as soap and

other residue can cause secondary mold and mildew growth.

* Silicone 1 is a trademark of Momentive Performance Materials Inc.

All Purpose Silicone 1* Sealant

Product Description

All Purpose Silicone 1 sealant is 100% waterproof and ideal for a wide range of projects exposed

to harsh weather from the attic to the basement. Permanently exible, it can stretch and move

with expansion and contraction and will never break down due to ultraviolet rays or freezing

temperatures. This high-quality sealant is resistant to unsightly stain causing mildew growth. It’s easy

to apply and oers excellent adhesion to many common building materials including most wood, metal,

vinyl siding, drywall/plaster, glass, and plastic. Backed by a lifetime guarantee.

Product Attributes

• Resists mold

(1)

with 7-year mold-free product protection

• Same-day rain and water-ready

• Full cure in 24 hours

• 100% silicone is 100% waterproof and 100% weatherproof

• Sun-proof and freeze-proof

• Meets ASTM C-920 Class 25 specications

• Permanently exible

• Never cracks, shrinks, breaks down, or washes away

• Freeze/thaw stability

• Non-paintable

Summary of content (6 pages)

PAGE 1
Product Data Sheet All Purpose Silicone 1* Sealant Product Description All Purpose Silicone 1 sealant is 100% waterproof and ideal for a wide range of projects exposed to harsh weather from the attic to the basement. Permanently flexible, it can stretch and move with expansion and contraction and will never break down due to ultraviolet rays or freezing temperatures. This high-quality sealant is resistant to unsightly stain causing mildew growth.
PAGE 2
Product Data Sheet Basic Uses All Purpose Silicone 1* sealant is used in a wide variety of applications including, but not limited to, windows, doors, siding, trim, and vents, as well as attic/basement applications. Adheres To Common building materials including most metals and woods, aluminum, composites, brick, stone, stucco, masonry, cement board, glass, porcelain, ceramic tile, drywall, plaster, vinyl siding, PVC, fiberglass, and painted surfaces.
PAGE 3
Product Data Sheet Typical Properties Typical physical property values of All Purpose Silicone 1* sealant as supplied and cured are set forth in the tables below. Typical Properties – Supplied Property Value Test Method Consistency Paste VOC (ex. water & exempt) < 36 g/L CARB Chem Curing (n.a.) VOC < 3.0 wt% Odor Acetic Acid (Vinegar) Work Life (tooling time) 5-10 minutes Tack Free Time (@ 72°F (22°C), 50% RH) 30 minutes Rain-Ready 12 hours Sag/Slump < 0.
PAGE 4
Product Data Sheet Masking The use of masking tape is recommended where appropriate to ensure a neat job and to protect adjoining surfaces from over-application of sealant. Masking tape should be removed immediately after tooling the sealant and before the sealant begins to skin over (tooling time). Instructions 1. R emove dirt, grease, moisture, soap residue & old caulk from area to be sealed. Use backer rod for gaps larger than 1/2” x 1/2” (12.7mm x 12.7mm)(1). 2.
PAGE 5
Product Data Sheet Specifications Meets ASTM C-920, Type-S, NS, Class 25, Use NT, M, G, A & O Test Requirements. Federal Specification TT-S-00230C, TT-S-001543A All Purpose Silicone 1* sealant is compliant for incidental food contact under FDA 21 CFR177.2600“Rubber articles intended for repeated use.
PAGE 6
Product Data Sheet Customer Service Centers Americas +1 (866) 275-4372 Email: askgesa@momentive.com Visit us at www.GEsealants.com THE MATERIALS, PRODUCTS AND SERVICES OF MOMENTIVE PERFORMANCE MATERIALS INC. AND ITS SUBSIDIARIES AND AFFILIATES (COLLECTIVELY “SUPPLIER”), ARE SOLD SUBJECT TO SUPPLIER’S STANDARD CONDITIONS OF SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES AGREEMENT, PRINTED ON THE BACK OF ORDER ACKNOWLEDGMENTS AND INVOICES, AND AVAILABLE UPON REQUEST.