Product Label

WARNING SIZES
SGS White
Plains, US
SGS Contact:
Kevin Deuschle
[e-mail]
Barcode: 028756957348
HENKEL CORPORATION
Reference No:
SGS# Screen
# of Colors: 4
Date
Description: GE All Purpose, Silicone 1 Sealant White
File Name: 30219675_Silicone1_WD_All_Purpose_White_10.1oz_2020.ai
End User: HENKEL CORPORATION
Barcode Mag: 100% Barcode BWA: Barcode NBW:
Printer: DOW
Printer Location:
Print Substrate: White
Distortion Around: Distortion Across:
Plant Code:
Mech/Sep Round #:
Seal ID#: 30219675
PANTONE
Black C
PANTONE
281 C
PANTONE
7455 C
PANTONE
877 C
RSN# 703657
FG IDH# 2749483
BULK IDH# N/A
NET WT: 1/8" (0.125")
SIGNAL: 1/8" (0.125")
STATEMENT: 3/32" (0.094")
OTHER: 5/64" (0.078")
Jan 27, 2021
ASTM
C920
CLASS 25
WINDOW & DOOR PROJECTS
SILICONE
ALL PURPOSE
100% WATERPROOF
EXCELLENT
FLEXIBILITY
STRONG
ADHESION
FREEZE &
SUN-PROOF
Outdoor
& Indoor
10.1 FL OZ
(298 mL)
100% SILICONE
Non
Paintable
7-YEAR Mold-Free Sealant
Same-Day Rain-Ready
Lifetime Guarantee
CAUTION!
UNCURED SEALANT
IRRITATES EYES, SKIN
AND RESPIRATORY TRACT.
Read carefully other cautions
on back panel.
SILICONE 1
®
WHITE
WINDOWS
SIDEWALKS
DOORS
SIDING
BASEMENTS
TUCK POINTING
ROOFS
ATTICS
Meets ASTM C-920, Type-S, NS, Class 25, use NT Test
Requirements. Fed. Spec. TT-S-00230C, TT-S-001543A
GE All Purpose Silicone 1 is compliant for incidental
food contact under FDA 21 CFR177.2600 “Rubber
articles intended for repeated use.”
Common building materials including
most metals and woods, aluminum,
composites, brick, stone, stucco,
masonry, cement board, glass, porcelain,
ceramic tile, drywall, plaster, vinyl siding,
PVC, fiberglass, and painted surfaces. Not
recommended for porous materials such
as cement. Test on inconspicuous area of
high-end metal finishes, as some
blemishing may occur during curing. Not
recommended for direct contact on the
reflective coatings on mirrors.
1. Remove dirt, grease, moisture, soap
residue & old caulk from area to be sealed.
Use backer rod for gaps larger than 3/8" x
3/8" (9.5 mm x 9.5 mm). 2. Remove cap &
cut nozzle to obtain desired bead size.
3. PIERCE INNER FOIL SEAL. 4. Using
caulk gun, apply sealant into gap. Sealant
beads should not be thicker than 1/2" (12.7
mm) or thinner than 1/8" (3.2 mm) using a
width-to-depth ratio of 2:1. Sealant should
be tooled within 5 to 10 minutes after
application. Do not use soapy water or oil
as a tooling aid. 5. Wipe hands & tools
thoroughly before washing. Clean tools
and uncured sealant residue immediately
with mineral spirits or paint thinner.
6. Allow at least 24 hours before exposing
sealant to water.
NOT RECOMMENDED FOR UNDERWATER
/ AQUARIUM USE.
FREEZE & SUN-PROOF: 100% weatherproof
sealant applies to wet or dry surfaces, is
permanently flexible and will not shrink or
crack when subjected to ultraviolet rays or
freezing temperatures.
7-YEAR MOLD-FREE SEALANT: Fully
cured sealant is resistant to stain-causing
mold and mildew growth. Regular
cleaning of sealant is required, however,
as soap and other residue may cause
secondary mold and mildew growth.
SAME-DAY RAIN-READY: Exposure to
water possible in as little as 12 hours with
bead size max 1/4", temperature min 65°F
and humidity min 50%. Do not touch or
clean sealant for 24 hours.
Application Temp: .... -30°F (-34°C) and 110°F (45°C)
Service Temp:.... :…..-76°F (-60°C) to 350°F (177°C)
Coverage (1/4" bead):.................................31 Lin. Ft.
Full Cure: .................................................... 24 hours
Water Exposure:.......................................... 24 hours
Paint Over Time: ........................ N/A (Non-paintable)
Odor: ............................................................ Vinegar
Clean-Up: ...........................................Mineral Spirits
Shelf Life (from manufacturing date):....... 24 months
ASTM C679 Tack-Free:...........................<25 minutes
ASTM C719 Joint Movement Capability: ....... +/- 25%
ASTM D412 Maximum Tensile Elongation: .....>350%
ASTM D412 Tensile Strength: ......................>170 psi
ASTM D2240 Shore A Hardness, Durometer: ........18
CHEMICALLY CURING SEALANT - VOC 3%
GE All Purpose, Silicone 1® sealant is 100% waterproof and ideal for a wide range of projects exposed
to harsh weather from the attic to the basement. Permanently flexible, it can stretch and move with the
house and will never break down due to ultraviolet rays or freezing temperatures. This high-quality
sealant is resistant to unsightly stain causing mildew growth. Backed by a lifetime guarantee.
TYPICAL PRODUCT INFORMATION
SPECIFICATION ADHERES TO
INSTRUCTIONS
CAUTION! Contains polydimethylsiloxane and
acetoxysilanes. Acetic acid is released during curing
and has a vinegar-like odor. Prolonged or repeated
contact with uncured sealant causes eye, skin and
respiratory irritation. Use with adequate ventilation. Do
not get in eyes or on skin or clothing. Remove contact
lenses before using sealant. Gloves recommended for
prolonged or repeated skin contact. Wash hands after
using. FIRST AID: In case of skin contact wipe off and
wash with soap and water. In case of eye contact flush
with water for 15 minutes, call a physician immediately.
In case of respiratory difficulty, remove to fresh air. If
swallowed, do not induce vomiting; call physician or
Poison Control Center. DO NOT TAKE INTERNALLY.
KEEP OUT OF THE REACH OF CHILDREN.
LIMITED LIFETIME GUARANTEE: Manufacturer warrants
that this product, when handled and used as directed, will
meet the above specifications for as long as you own your
home. If not satisfied, return proof of purchase for refund.
This is the sole and exclusive remedy and Manufacturer shall
not be liable for any damages in excess of the purchase price.
THIS WARRANTY IS IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY
WARRANTY OF MERCHANTABILITY OR FITNESS.
GE is a registered trademark of General Electric Company and is
used under trademark license by Henkel.
Silicone 1 is a registered trademark of Henkel and its affiliates in
the US and elsewhere.
For questions or information: Call 1-877-607-7407 or
visit www.gesealants.com.
© 2021 Henkel Corporation. All rights reserved.
†Estimates of comparative U.S. sales based on analysis of
available 2020 industry reports and retail sales data.
30219675
99181125- 0121
Made in USA of foreign and domestic components.
Henkel Corporation
One Henkel Way
Rocky Hill, CT 06067
Maximum Graphics Height 185mm
Maximum Text & Graphics Width 146mm
Maximum Band Width 155mm