RM24908 Thank you for purchasing the GE Universal Remote Control. This product is designed to provide years of service operating a wide variety of video and audio equipment. Please retain this guide for future reference. Table of Contents Battery Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Button Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Programming for TV . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 TV Codes . . . . . . . . . . . . . .
Battery Installation Your Universal Remote Control requires 2 AAA alkaline batteries(not included). To install the batteries: 1. Turn the remote over and push down on the cover and slide it off. 2. Insert the batteries, matching the batteries to the (+) mark inside the battery case. 3. Slide the battery cover back into place. NOTE: Programmed codes will remain in memory for a short period of time allowing for battery replacement.
1. Manually turn on the TV. Find the three digit code for your TV in the code list below. 2. PressandholdtheCODE SEARCHbuttonuntiltheINDICATOR LIGHT lights, then release the CODE SEARCH button. 3. Press and release the TV button (The INDICATOR LIGHT will blink then remain lit. 4. Enter the code using the Number Buttons. After your code is entered, the INDICATOR LIGHT will turn off. If the code is not valid, the INDICATOR LIGHT will blink. Check the code list and repeat process.
TV Codes Price Club . . . . . . . . . . . . .105 Prism . . . . . . . . . . . . . . . . .054 Proton . . . . . . . . . . . 004, 093 Pulsar . . . . . . . . . . . . . . . . .151 Pulser . . . . . . . . . . . . . . . . .004 Quasar . . . . . . . 003, 054, 070 . . 006, 012, 038, 049, 162, 171 RCA . . . . . . 000, 003, 004, 005, . . 006, 007, 019, 096, 098, 099, 100, 101, 102, 103, 129, 179, . . 181, 188, 190, 203, 212, 233 Realistic . . 000, 004, 049, 195 Runco . . . . . . . . . . . . . . . . .151 Sampo . . . .
Programming For VCR 1. Manually turn on the VCR. Find the three digit code for your VCR in the code list. 2. Press and hold the CODE SEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button. INDICATOR LIGHT 3. Press and release the VCR•DVD button (The INDICATOR LIGHT will blink then remain lit. CODE SEARCH INDICATOR BLINK LIGHT 4. Enter the code using the Number Buttons. After your code is entered, the INDICATOR LIGHT will turn off.
VCR Codes Proscan . . . . . . . . . . . . . . . 000 Protec . . . . . . . . . . . . . . . . . 061 Quarter . . . . . . . . . . . . . . . . 011 Quartz . . . . . . . . . . . . . . . . . 011 Quasar . . . . . . . . 021, 022, 125 RCA . . .000, 003, 013, 021, 022, 055, 056, 082, 083, 084 085, . . 086, 087, 088, 089, 090, 091, . . 107, 115, 120, 125 Radioshack . . . . 001, 011, 013, . . 014, 021, 022, 023, 026, 029, 049, 050, 096 Radix . . . . . . . . . . . . . . . . . . 014 Randex . . . . . . . . . . . . . . . .
Programming For DVD The DVD codes are programmed using the VCR•DVD key. CODE LIST DVD Codes Aiwa . . . . . . . . . . . . . . . . . . .350 Hitachi . . . . . . . . . . . . . . . . .351 JVC . . . . . . . . . . . . . . . 161, 352 Konka . . . . . . . . . . . . . 353, 354 Magnavox . . . . 162, 356, 357 Mitubishi. . . . . . . . . . . . . . . .163 Panasonic . . . . . . . . . . . . . .355 Philips . . . . . . . . 162, 356, 357 Pioneer . . . . . . . . . . . . . . . .165 Proscan . . . . . . . . . . . . . . . .
Programming For Cable The cable codes are programmed using the DBS•CABLE key. Cable Codes ABC . . . 001, 003, 004, 005, 006, 007 Antronix . . . . . . . . . . . 008, 009 Archer . . . . . 008, 009, 010, 011 Cabletenna . . . . . . . . . . . . . .008 Cableview. . . . . . . . . . . . . . .008 Century . . . . . . . . . . . . . . . . .011 Citizen . . . . . . . . . . . . . . . . . .011 Colour Voice. . . . . . . . 012, 013 Comtronics . . . . . . . . . . . . . .015 Contec/Cony . . . . . . . . . . . .016 Eastern . .
TV off. Menu Function The Menu Function is used to make changes in the selected settings such as setting color, channels, timer, etc. The MENU button invokes TV, and SAT modes. Each menu will vary from brand to brand. Entering the Menu Mode: 1. Push the device button on the remote for the desired menu screen. BLINK 2. Push the MENU button. This allows you to view the menu of the device chosen. The menu should now be visible on your television. BLINK 3.
Programming With Code Search If your TV, VCR, DBS Satellite System or Cable Box does not respond after you have tried all the codes for your brand, or if your brand is not listed, try searching your code by following the steps below: 1. Manually turn on the device you wish to program. 2. Press and hold the CODE SEARCH until the INDICATOR LIGHT lights, then release CODE SEARCH. INDICATOR LIGHT 3. Press and release the device button for the device you are programming.
Trouble Shooting PROBLEM SOLUTION Red light not blinking when you press any key. A) Replace the batteries with 2 new AAA alkaline batteries. B) Check if batteries are properly installed. The remote does not operate your devices. Not performing commands properly Problems programming a TV/ VCR Combo Unit VCR not responding Problems changing channels A) Try all the codes listed for your brand. B) Try the Code Search method.
90 Day Limited Warranty Jasco Products Company warrants this product to be free from manufacturing defects for a period of ninety days from the original date of consumer purchase. This warranty is limited to the repair or replacement of this product only and does not extend to consequential or incidental damage to other products that may be used with this unit. This warranty is in lieu of all other warranties express or implied.
Gracias por comprar el Control Remoto Universal GE. Este producto está diseñado para proveerle años de servicio operando una amplia variedad de equipo de video y audio. Por favor guarde esta guía para obtener referencias en el futuro. Indice Instale las Baterías . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Descripción de los Botones . . . . . . . . . . . . . . . . . . 14 Programación para el Televisor . . . . . . . . . . . . . . . . 15 TV Códigos . . . . . . . . . . . . . . . . . . . . . . .
Descripción de Botones LUZ INDICADORA La luz indicadora parpadea para mostrar que el control remoto está trabajando. OFF•ON (ENCENDIDO-APAGADO) El botón OFF•ON opera de la misma manera que su control remoto original. NOTA: Algunos modelos GE, RCAy ProScan requieren que usted presione el botón del aparato para encender el aparato y el botón ON-OFF para apagarlo. TV, VCR•DVD, DBS• CABLE LosbotonesTV,VCR•DVD,yDBS•CABLEseusanparaseleccionarel aparato que desee controlar.
Programación para el Televisor 1. Manualmenteenciendaeltelevisor.Encuentreelcódigodetres dígitos para su televisor en la lista de códigos que se encuentra a continuación. 2. Mantenga presionado el botón CODE SEARCH hasta que la LUZ INDICADORA se encienda, entonces suelte el botón CODE SEARCH. INDICATOR LIGHT 3. Presione y suelte el botón TV. (La LUZ INDICADORA parpadeará y después permanecerá encendida.) CODE SEARCH 4. Introduzca el código utilizando los Botones Numerados.
TV Códigos Hallmark . . . . . . . . . 004, 006 Harvard . . . . . . . . . . . . . . .038 Hitachi . . . 004, 006, 012, 013, 059, 060, 061, 135, 136, 137, . . 138, 139, 140, 141, 142, 143, . . 144, 145, 146, 148, 150, 179 IMA . . . . . . . . . . . . . . . . . . .038 Infinity . . . . . . . . . . . . . . . . .162 Janeil . . . . . . . . . . . . . . . . .174 JBL . . . . . . . . . . . . . . . . . . .062 JCB . . . . . . . . . . . . . . . . . . .002 JC Penney . . . . 000, 004, 005, . .
Programación para VCR 1. Manualmente encienda la videograbadora. Encuentre el código de tres dígitos para su videograbadora en la lista de códigos que se encuentra a continuación. 2. Mantenga presionado el botón CODE SEARCH hasta que la LUZ INDICADORA se encienda, entonces suelte el botón CODE SEARCH. INDICATOR LIGHT 3. Mantenga presionado el botón VCR•DVD. (La LUZ INDICADORA parpadeará y después permanecerá encendida.) 4. Introduzca el código utilizando los Botones Numerados.
VCR Códigos Goldstar . . . 009, 014, 018, 054 Gradiente . . . . . . . . . . . . . . 026 Harley Davidson . . . . . . . . 026 Harman Kardon . . . . . . . . . 009 Harwood . . . . . . . . . . . . . . . 061 Headquarter. . . . . . . . . . . . 011 Hitachi . . . .055, 056, 057, 107, . . . . . . . . . . . . . . . . . . . 111, 120 Hi-Q . . . . . . . . . . . . . . . . . . . 023 Instant Replay . . . . . . . . . . 021 JCL. . . . . . . . . . . . . . . . . . . . 021 JC Penney . . . . . 009, 010, 011, . . .
Programación para el sistema DVD Los códigos del DVD se programan utilizando el VIDEO•llave de DVD. DVD Códigos Aiwa . . . . . . . . . . . . . . . . . . .350 Hitachi . . . . . . . . . . . . . . . . .351 JVC . . . . . . . . . . . . . . . 161, 352 Konka . . . . . . . . . . . . . 353, 354 Magnavox . . . . 162, 356, 357 Mitubishi. . . . . . . . . . . . . . . .163 Panasonic . . . . . . . . . . . . . .355 Philips . . . . . . . . 162, 356, 357 Pioneer . . . . . . . . . . . . . . . .165 Proscan . . . . . . . . .
Programación para Cable Los códigos del cable se programan utilizando el DBS•CABLE de CABLE. Cable Códigos ABC . . . 001, 003, 004, 005, 006, 007 Antronix . . . . . . . . . . . 008, 009 Archer . . . . . 008, 009, 010, 011 Cabletenna . . . . . . . . . . . . . .008 Cableview. . . . . . . . . . . . . . .008 Century . . . . . . . . . . . . . . . . .011 Citizen . . . . . . . . . . . . . . . . . .011 Colour Voice. . . . . . . . 012, 013 Comtronics . . . . . . . . . . . . . .015 Contec/Cony . . . . . . . . . . .
Función de apagado automático La función de apagado automático apagará su televisor automáticamente después de que el usuario programe un intervalo de tiempo entre uno (1) y noventa y nueve (99) minutos. 1. Mantenga presionado el botón SLEEP. La LUZ INDICADORA permanecerá encendida. Suelte el botón SLEEP. 2. Introduzca el tiempo en minutos utilizando el teclado de numeros. La LUZ INDICADORA se apagará.
MODALIDAD DEL MENU. Para cancelar la Modalidad del Menu y despejar la pantalla, presione el botón del aparato que haya seleccionado en el control remoto. NOTA: El control remoto cancelará la Modalidad del Menu automáticamente después de estar inactivo por diez (10) segundos, sin haber presionado ningun botón. Las notas especiales: 1. A causa de la gran variedad de formatos de menú, algún experimentar se puede requerir. 2. SONY: Apretando el ENTRA el botón mientras en el modo de menú vuelve al menú previo.
Recuperar Codifica Si usted necesita encontrar el código de tres dígitos para su televisión, el VIDEO, DBS o Caja de Cable después que su dispositivo es arreglo, utilice este procedimiento: 1. Mantenga presionado el botón CODE SEARCH hasta que la LUZ INDICADORA se encienda, entonces suelte el botón CODE SEARCH. 2. Presione y suelte el botón del aparato para el aparato que usted esté programando. La LUZ INDICADORA parpadeará una vez.
GuÌa de Problemas y Soluciones PROBLEMA SOLUCION La luz roja no parpadea cuando presiona cualquier tecla. A) Reemplace las pilas con unas alcalinas nuevas AAA. B) Verifique que las pilas estén instaladas correctamente. El control remoto no opera sus aparatos de video. A) Trate todos los códigos listados para su marca. B) Trate el método de Busqueda de Códigos. No desempeña los comandos correctamente.
GarantÌa Limitada de 90 DÌas Jasco Products Company garantiza este producto por un periodo de noventa días desde la fecha de la compra original, como libre de defectos de fabricación. Esta garantía está limitada a la reparación o reemplazo de este producto y no se extiende a daños consecuentes o incidentales en otros productos que puedan ser usados con esta unidad. Esta garantía es en vez de cualquier otra expresa o implícita.