Instructions / Assembly

Safety Rules
1
READ AND SAVE THESE INSTRUCTIONS
1. To reduce the risk of electric shock, ensure electricity has
been turned off at the circuit breaker or fuse box before
beginning.
2. All electrical connections must be made in accordance
with local codes, ordinances and/or the National Electric
Code. Electrical installation should be performed by a
qualified licensed electrician.
3. WARNING: to reduce the risk of electrical shock or fire, do
not use this fan with any solid-state fan speed control device.
It will permanently damage the electronic circuitry.
4. CAUTION: To reduce the risk of personal injury, use only
the screws provided with the outlet box.
5. The weight of the fan is 7.66 kg (16.89 lb.). The outlet box
and support structure must be securely mounted and capable
of reliably supporting a minimum of 15.9 kg (35 lb.). Use only
UL Listed outlet boxes marked “FOR FAN SUPPORT.”
6. The fan must be mounted with a minimum of 2.1m (7 ft.)
clearance from the trailing edge of the blades to the floor.
7. Avoid placing objects in the path of the blades.
8. To avoid personal injury or damage to the fan and other
items, be cautious when working around or cleaning the fan.
9. Do not use water or detergents when cleaning the fan or
fan blades. A dry dust cloth or lightly damped cloth will be
suitable for cleaning.
10. After making electrical connections, spliced conductors
should be turned upward and pushed carefully up into
the outlet box. The wires should be spread apart with
the grounded conductor and the equipment-grounding
conductor on one side of the outlet box and ungrounded
conductor on the other side of the outlet box.
11. All screws must be checked and re-tightened where
necessary during installation.
12. This fan is suitable for room sizes up to 144 square feet
(13.38 square meters).
WARNING: To reduce the risk of
personal injury, do not bend the
blade arms (also referred to as
flanges), when installing the
brackets, balancing the blades
or cleaning the fan. Do not insert
foreign objects in-between
rotating fan blades.
WARNING: To reduce the risk of
fire, electric shock or personal
injury, mount to outlet box
marked “acceptable for fan
support of 15.9 kg (35 lb.) or less”
and use mounting screws
provided with the outlet box. Most
outlet boxes commonly used for
the support of light fixtures are
not acceptable for fan support
and may need to be replaced. Due
to the complexity of the
installation of this fan, a qualified
licensed electrician is strongly
recommended.
Min. 7ft/2.13m
Min. 30in/76cm
13. This fan is designed to be mounted on a flat ceiling only.
Do not mount fan on a sloped or vaulted ceiling.
NOTE: Fan must be installed at a
maximum distance of 6 m (20 ft.)
from the transmitting unit for
proper signal transmission
between the transmitting unit
and fan’s receiving unit.
CAUTION: Do not use wall switch
with dimmer function.