GE Front Loading Laundry Pair Installation Options We bring good things to life.
Washer: 4 • Install separate Hot & Cold faucets within 42" of the washer inlet. • Provide a standpipe, 1-1/4" min. dia. and 24" min., 58" max. high. The attached drain hose will reach a 58” standpipe. • The washer must be supplied with 120 volt, 60 Hz., and connected to an individual, properly polarized and grounded branch circuit protected by a 15 amp circuit breaker or time delay fuse. The 3 prong receptacle must be located where it will be accessible when the washer is installed.
Installation Options Built-In e /4" Wid es igh x 3 3/4" H on All Sid Lip A B C Elevate the pair for easy accessibility and a custom appearance. DIMENSION A: 14" recommended, however this laundry pair can be elevated to suit customer needs. • All four sides of the platform should be permanently secured and extend a minimum of 3/4" above the platform. • Height is only limited by the use of overhead cabinetry. • The standpipe height must be increased to accommodate additional installation height.
GE Appliances General Electric Company Louisville, Kentucky 40225 www.ge.com/appliances Listed by Underwriters Laboratories Pub. No. 14-T019 N.D.
