User's Manual

ManualsBrandsGE Lighting ManualsElectronicsLED LAMP

6BC-BR800SS-A1Z

120V

Tunable white

100%

5%~100%

2400-5000K

5000K

Factory Default None

Pair Successfully Flash 3 times

Modify Device Name None

Choose light to group None

加组完成 Flash 3 times

Modify Group Name 无

Kick off device out of group

Flash 3 times

Choose light to scene Flash 3 times

Add to scene successfully None

Modify Scene None

Kick off device out of scene

None

OTA Flash 3 times

Kick off device by gateway

Flash 3 times

Reset Flash 3 times

Yes

1/3/5/15/30s

1/3/5/15min

BLE Mesh

Yes

GE HUB

UL+FCC

Memory Function Duration

Model

Voltage

Brightness range

Initial brightness

CCT range

Initial CCT

Pair

Phenomenon

BR30 User Manual

Gateway Type

Certification

Function

Off-network

Group quantity

Scene quantity

OTA

Function

FTS

Smart Control (Scheduling)

Smart Control Duration

Network Architecture

Memory Function

Summary of content (2 pages)

PAGE 1
BR30 User Manual Model 6BC-BR800SS-A1Z Voltage 120V Function Tunable white Initial brightness 100% Brightness range 5%~100% CCT range 2400-5000K Initial CCT 5000K Phenomenon Factory Default Pair None Pair Successfully Flash 3 times Modify Device Name None Choose light to group None 加组完成 Flash 3 times Modify Group Name Off-network 无 Kick off device out of group Flash 3 times Choose light to scene Flash 3 times Add to scene successfully None Modify Scene None Kick off device
PAGE 2
Remark 1. Factory new: bulb with certain mesh name and password, concrete content depend on customer. 2. Log in at first time: user use the default mesh name and password to log in and modify the mesh name and password by self, light will flash 3 times after modifying successfully. The device which use same mesh name and password should under same network. 3. Reset device: if user forget the mesh name and password they set, they could rest the device through on/off 5 times the device.