Specifications

GE Connected A19 CLEDA199S2, input 120Vac, frequency was 60Hz, high

efficiency, safety & stability output. Use Bluetooth 4.1 chip technology to realize the

far distance control. Through the APP to control the PWM signal to dim and even

control the switch on & off of the bulb.

Product features:

1. Controlled by Bluetooth 4.1 to realize the far distance control.

2. CCT range is 2000K-7000K, default CCT is 2700K.

3.With advanced chips to make sure the bulb with high efficiency, low consumption

and stability.

4. Internal constant current output to make sure the high power conversion efficiency

and stability output.

Product Name LED LAMP

Brand Name GE

Model No.

CLEDR309S2@

@ rates for package information,

maybe 1P~10P

Working Voltage 120Vac

Bluetooth Specification Version 4.1

Frequency Range 2400- 2483.5MHz

Channel Number 40

Channel Separation 2MHz

Type of Modulation GFSK

Data Rate 1Mbps(GFSK)

Antenna Type PCB Antenna

Peak Antenna Gain 3.93 dBi

PAGE 1
GE Connected A19 CLEDA199S2, input 120Vac, frequency was 60Hz, high efficiency, safety & stability output. Use Bluetooth 4.1 chip technology to realize the far distance control. Through the APP to control the PWM signal to dim and even control the switch on & off of the bulb. Product features: 1. Controlled by Bluetooth 4.1 to realize the far distance control. 2. CCT range is 2000K-7000K, default CCT is 2700K. 3.With advanced chips to make sure the bulb with high efficiency, low consumption and stability.
PAGE 2
For additional help, regulatory and safety Information, please go to: Federal Communications Commission (FCC) Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
PAGE 3
IC Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.