USER MANUAL OF SMART KIT IMPORTANT NOTE: Read the manual carefully before installing or connecting your Smart kit(Wireless module). Make sure to save this manual for future reference.
CONTENTS 1 SPECIFICATION........................................... 2 2 INSTALL THE SMART KIT 3 4 5 6 7 8 9 (wireless module) ........................................3 DOWNLOAD AND INSTALL APP................. 4 PREPARATION ............................................ 4 CREATE ACCOUNT...................................... 5 NETWORK CONFIGURATION..................... 6 HOW TO USE APP........................................ 21 SPECIAL FUNCTIONS................................. 24 APP DECLARATION.............
Cautions Due to different network situation, control process may return time-out sometimes. If this situation occurs, the display between board and App may not be the same, please do not feel confused. Smart Phone camera needs to be 5 million pixels or above to make sure scan QR code well. Due to different network situation, sometimes, request time-out could happen, thus, it is necessary to do network conf iguration again.
2 INSTALL THE SMART KIT(wireless module) 1) Remove the protective cap of the smart kit. 2) Open the front panel and insert the smart kit into the reserved interface. 3) Attach the QR code packed with SMART KIT to the side panel of the machine or other convenient location, ensure it is covenience to be scanned by the mobile phone. Kindly reminder: It is better to reserve the other two QR Code in a safe place or take a picture and save it in your own phone.
3 DOWNLOAD AND INSTALL APP CAUTION: The following QR Code is only available for downloading APP. It is totally different with the QR code packed with SMART KIT. iOS Android Scan QR c ode to do wnload the “ Midea Air ” APP or ge t it fro m G oo gle p lay an d app store by ma nu ally se arching. 4 PREPARATION 1) Please ensure your mobile device is connected to Wifi router. Also, the Wifi router has already conne cted to Internet before do ing us er registration and network configuration.
5 CREATE ACCOUNT Reminder: When you register to use app, you need read and agree the Data Privacy Notice.
6 NETWORK CONFIGURATION Cautions It is necessary to forget any other around network and make sure the Android or i OS device just connect to the Wi-Fi network you want to configure. Make sure the Android or i OS device Wi-Fi function works well and can be connected back to your original Wi-Fi network automatically. Kindly reminder: User must finish all the steps in 8 minutes after powering on AC, otherwise you need to power on it again.
5 Press “ + Add Device ” 7
6 Press “Scan for nearby devices” 7 Wait smart devices to find, then click to add it 8
9 Wait connecting to the network 8 Select home Wi-Fi, enter the password 9
10 Configuration Success,you can see the device on the list, you can also custom the device name.
11 Name setting is successful 11
12 Follow the above steps to enter “AP” mode.
13 Choose the network configuration method. 14 Choose the “Scan the QR code” method.
Or choose the “Manual 16 Please enter password Setup” method.
17 Network configuration is successful 15 18 Configuration Success, you can see the device on the list.
1 2 3 4 Using iOS device to do network configuration Make sure your mobile device has already been connected to the Wi-Fi network which you want to use. Also, you need to forget other irrelevant Wi-Fi network in case it influences your configuration process. Disconnect the power supply of AC(some units). Connect the power supply of AC, and continuously press the “LED DISPLAY” button or “DO NOT DISTURB” button seven times in 10 seconds.
7 Follow the above steps to enter “AP” mode.
8 Connect to the Wi-Fi network.
11 Configuration Success, 10 Network configuration is you can see the device on the list.
NOTE: When finishing network configuration, APP will display success cue words on the screen. Due to different internet environment, it is possible that the device status still display “offline” . If this situation occurs, it is necessary to pull and refresh the device list on the APP and make sure the device status become “online” . Alternatively, user can turn off the AC power and turn on it again, the device status will become “online” after few minutes.
7 HOW TO USE APP Please ensure both your mobile device and air conditioner are connected to the Internet before using app to control the air conditioner via internet, please follow the next steps: cc 2 Choose the air conditioner.
3 Thus, user can control air conditioners on/off status, operation mode, temperature, fan speed and so on.
NOTE: Not all the function of the APP is available on air conditioner. For example: ECO, Turbo, Swing function, please check the user manual to find more information.
8 SPECIAL FUNCTIONS Including: Timer on, Timer off, Sleep curve, Check, Energy Monitor, Bill Control Check. NOTE: No all the unit can use these special function on the APP. Thus, if the air conditioner do not support the above function, the function will be hided f rom the function list.
Timer on/ Timer off Weekly, user can make an appointment to turn on or off AC on specific time. User also can choose circulation to keep the AC under schedule control ev ery week.
Sleep User can cust omize their own comfortable sleep by setting target temperature.
Check User can simply check the AC running status with this func tion. When f inishing this procedure, it can di splay the normal items, abnormal items, and detail information.
Energy Monitor User can simply monitor the el ectrici ty consumption of AC unit by checking the chart and history record.
Bill Control User can set parameters to limit the electricity consumption over a period of time.
Share Device The air conditioner can be controlled by multi-users at the same time by Share Device function.
3 The other users must log 4 Now the others can in " Midea Air " app add the shared device. first, then click "Add Share Device " on their own mobile, then ask them to scan the QR code.
9 APP DECLARATION Hereby, we declare that this Smart kit is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. A copy of the full DoC is attached.(European Union products only) CAUTIONS: For models of US-SK105,EU-SK105, US-OSK105,EU-OSK105: FCC ID: 2ADQOMDNA21 IC: 12575A-MDNA21 T his d evice co mplies with Pa rt 1 5 o f the F CC R ules and In dustry Can ada's lice nce-exemp t RSS standards.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Manufacturer: GD Midea Air-Conditioning Equipment Co,.Ltd. Lingang Road Beijiao Shunde Foshan Guangdong People’s Republic of China 528311 Company will not be liable for any issues and problems caused by Internet, Wireless Router and Smart Devices. Please contact the original provider to get further help.
此页内容无需印刷 技术要求: 铜版纸105克, 74mm*105mm 彩色印刷 基准说明书为单英文版,无欧盟区域DOC内容, 只是兼容了欧盟RED指令信息和北美 FCC指令 等内容。由业务根据销售的区域及客户要求, 通知订单对内容进行修订,欧盟地区需要由业 务添加DoC合规声明文件(建议放在说明书倒 数第二页),将完整说明书电子档提交给制单。