Specifications

ManualsBrandsGD Midea Air-conditioning Equipment ManualsElectronicsSmart Kit with 802.11b/g/n and Bluetooth Low Energy

Unit

Speciﬁcations

and Features

Page 12

Wireless control Feature

Applicable system: iOS, Android

1) Please ensure your mobile device is connected to Wifi router. Also, the Wifi router has already

connected to Internet before doing user registration and network configuration.

2) Make sure your mobile device has already been connected to the Wifi network which you want to use.

Also, you need to forget other irrelevant wifi network in case it influences your configuration process.

Please keep your APP up to date with the latest version.

Due to special situation may be occurred, we explicitlyclaims below: Not all of the Android

and iOS system are compatible with APP. We will not be responsible for any issue as a

result of the incompatibility.

Wireless safety strategy

Smart kit only support WPA-PSK/WPA2-PSK encryption and none encryption.

WPA-PSK/WPA2-PSK encryption is recommended.

CAUTIONS:

Due to different network situation, control process may return time-out sometimes. If this

situation occurs, the display between board and APP maynot be the same, please do not

feel confused.

Smart Phone camera needs to be 5 million pixelsor above to make sure scan QR code well.

Due to different network situation, sometimes, request time-out could happen, thus, it is

necessary to do network configuration again.

The APP system is subject to update without prior notice for product function improvement.

The actual network configuration process may be slightly differentfrom the manual, the

actual process shall prevail.

Please check the Service Website for more information.

SPECIFICATION:

Wi-Fi module model: EU-SK10, US-SK10

Standard: IEEE 802. 11b/g/n

Antenna Type: Printed PCB Antenna

Frequency Band: 2400-2483.5MHz

Operation Temperature:0 C~45 C/32 F~113 F

Operation Humidity: 10%~85%

Power Input: DC 5V/00mA

Maximum TX Power: <20dBm

PREPARATION:

1. DOWNLOAD AND INSTALL APP

On an app market (Google Play Store, Apple App Store), search for "MSmartHome" and find the

MSmartHome app. Download and install it on your phone, You can also download the app by scanning

the QR code below.

Download the app

& activate product

MSmartHome

Summary of content (6 pages)

PAGE 1
s Wireless control Feature CAUTIONS: Due to different network situation, control process may return time-out sometimes. If this situation occurs, the display between board and APP maynot be the same, please do not feel confused. Smart Phone camera needs to be 5 million pixelsor above to make sure scan QR code well. Due to different network situation, sometimes, request time-out could happen, thus, it is necessary to do network configuration again.
PAGE 2
. NETWORK CONFIGURATION Unit Specifications and Features CAUTIONS: It is necessary to forget any other around network and make sure the Android or iOS device just connect to the Wi-Fi network you want to configure. Make sure the Android or iOS device Wi-Fi function works well and can be connected back to your original Wi-Fi network automatically. Kindly reminder: User must finish all the steps in 8 minutes after powering on air conditioner, otherwise you need to power on it again.
PAGE 3
6). Connect your device to Wi-Fi according to the instructions on app. If the connection fails, please follow the instructions provided by the app to continue with the operation. NOTE: · Make sure your devices are powered on. · Keep your mobile phone close enough to your device when you are connecting network to your device. · Connect your mobile phone to the wireless network at home, and make sure you know the password of the Wi-Fi. · Check if your router supports 2.4 GHz Wi-Fi band and turn it on.
PAGE 4
3. HOW TO USE APP Please ensure both your mobile device and air conditioner are connected to the Internet before using app to control the air conditioner via internet, please follow the next steps: Unit Specifications and Features Login Enter email XXXXXXXXX Enter password Login MSmartHome Login 1 Click " Login " 2 Choose the Air Conditioner. 3 Thus, user can control air conditioners on/off status, operation mode, temperature, fan speed and so on.
PAGE 5
Sleep Users can customize their own comfortable sleep by setting target temperature. Every day Energy Monitor User can simply monitor the electricity consumption of air conditioner by checking the chart and history record. Bill Control User can set parameters to limit the electricity consumption over a period of time. Check User can simply check the air conditioner running status with this function. When finishing this procedure, it can display the normal items, abnormal items, and detail information.
PAGE 6
Unit Specifications and Features 5. APP DECLARATION Hereby, we declare that this Smart kit is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. A copy of the full DoC is attached.