User Manual
Parts Of The Camera 1. 2. 3. 4. 5. 6. 7. IR LED Microphone Lens Front motion sensor DC adapter port Side motion sensor Indicator light 8. Memory card slot 9. USB jack 10. Left/playback button 11. ON-TEST-OFF button 12. Down/Capture Button 13. Menu Button 14. OK/Shot button 15. Right button 16. Up/Video Button 17. Speaker 18.
19. Lock hole Power Supply Before using the device, users can choose battery charging or DC power supply according to their needs. If you choose battery power, please insert the batteries first. This device supports 1.5 V AA batteries and 3.7V 18650 lithium batteries. ♦ If you choose to use 1.5 V AA batteries, please open the device and find the battery compartment, insert 4*1.5 V AA batteries. When inserting the battery, make sure that the battery polarity is correct. ♦ If you choose to use 3.
♦When using the power adapter above DC6V1.5A (not provided) to charge, please find the DC adapter port on the bottom of the device and open the rubber, connect one end of the power adapter to the device and the other end to the power supply for supply power. Inserting The Memory Card Please prepare a memory card and insert it into the camera for saving files. Before recording, please format the memory card first. ♦ Support memory card,up to 512GB. Suggest to use class 6 or above high speed card.
short-circuit influenced by environment temperature and humidity. Please notice protection for the camera when using it outdoor. ♦ If the capacity of memory card is full, the camera will stop recording automatically. ♦ Press the edge of the card gently to pop-up the memory card. Basic Operation Turn On And Off The Camera Switch the Mode Button to“Test/On”to turn on the camera.After power on, it will pop up the battery type selection interface: 1.5V alkaline battery/3.
1. Press Menu button to open the setup menu. 2. Press Up/Down button to scan all menu. Then press OK button to enter the options interface. 3. Press Up/Down button to scan all options. And press OK button to confirm options. 4. Press Menu button again to turn back to last menu or exit the setup menu. Setup menu and function as below: Mode Set the working mode. In photo mode,the camera just take pictures. In Video mode,the camera just record video.
[3MP(2304 x 1296P)] /[1MP(1280x720P)]. Photo Series Set the photo number of continuous shooting. In photo mode, the camera will take photos continuously. Options : [1 photo]/[2 photos in series]/[3 photos in series]/[10 photos in series]. Video Resolution Set the video resolution. The higher the resolution, the shorter the video duration that can be stored, and vice versa . Options : [1920x1080P]/[1280x720P]/[848x480P]/[720x480P]/ [640x480P]/[320x240P].
Video Length Set the duration of recording a video clip. The shortest time is 3 seconds and the longest time is 2 minutes. Options:3 seconds~2 minutes. Audio Recording Open this function,the camera will record audio when recording video. Options:[On] /[Off]. Shot Lag Set the time of delay shooting when the camera detects the motion. In the selected time, the camera will not record any image or video. This function can avoid to store too much same event and save more capacity.
huge outdoors. The temperature can also influence the sensor sensitivity. “High Sensitivity”applies to mild environment. ”Low Sensitivity ”applies to cold environment. Options:[Low] /[Middle] /[High]. Settings Target Recording Time Set target recording time Stop: Hr:Min 00 00 Set the target recording time. As shown Start: Hr:Min in below picture, you can set the start 00 00 and stop time. The camera will work just in the stated time slot. In other time, the MENU Back camera will keep in standby state.
Time Lapse In Time lapse menu, there are three options as below. [Normal]: The camera will take pictures automatically as per set time interval. For example,set the interval time to 1 hour, the camera will take a photo each hour. If you want to observe that a plant blooms, the camera will take 24 photos in 24 hours to record the whole process of blooming. [TL Video]: You can set the interval Settings time.The time range is from 1 second to Set time lapse Hr:Min :Sec 24 hours.
Endless Capture Set the camera to record video in loop. Options:[On]/[Off]. Time & Date Set the date and time of camera. The date format: dd/mm/yyyy, yyyy/mm/dd,mm/dd/yyyy. The time format: 24h,12h. Press Right button to choose the item.Press Up/Down button to adjust the value. And press OK button to confirm. Options:[Set time&date] /[Time format]/[Date format]. Photo Stamp Stamp the date&time on the photos or not. Options:[Time&date] /[Date] /[Off].
parameters will reset to the factory settings. Options:[On]/[Off]. WIFI SSID You can view the WIFI name of the device. WIFI Password Set and change the WIFI password. Beep Sound Open/close the button sound. Options:[On]/[Off]. Format Memory Card Formatting the memory card will delete all data permanently. Before using a new memory card or a card that has been used in another device previously ,please format the memory card. Options:[Yes]/ [No]. Serial NO.
Options:[On]/[Off]. Reset Settings Restore the camera to factory default settings including password,serial number and so on. Options:[On]/[Off]. Version Look up the Firmware information of the camera. Take Photos、Record Video、Playback Switch the Mode Button to “Test”. In this mode,you can take photos, record video and playback files manually. ♦ Take Photos:Press Capture button to switch to photo mode. Press Shot button to take a picture. ♦ Record Video : Press Video button to switch to video mode.
button again to have a pause. Press Menu button to stop playback. Press Playback button again to exit the playback mode. Playback Menu: 1 ) Delete current file : Delete the current photo or video. Options:【Cancel】/【Delete】. 2)Delete all files:Delete all photo and video files in the memory card. Options:【Cancel】/【Delete】. 3)Activate slide show:Playback the photos in slide way. Each photo display 3 seconds. Press OK button to stop playing. 4)Write protect:Lock the file. It can avoid accident deletion.
If the wild animals enter the detection range of the motion sensors , the camera will be activated and detect the motion trail. If the wild animals continue to move to the detection zone of the sensor, the camera will take photos or record video automatically. When the wild animals leave the detection zone of the sensors , the camera will be deactivated and turn back to standby mode. Night Mode In night mode,the pictures just can display white and black.
Components 1.Tripod screw 2. Lock nut 3. Pivot bolts 4. Drill holes 5. Hexagonal screw 6. Wall plugs 7. Screws Mounting the wall bracket Required tools ■ Drill ■ 6 mm masonry/concrete drill bit ■ Phillips head screwdriver Caution ♦ Ensure that there are no electric lines, water or heating pipes installed at the proposed drilling location. ♦ The supplied wall plugs are only suitable for mounting on concrete or stone.
your installation location carefully for its suitability for the plugs. The assembly material used must be suitable for the respective location. If in doubt, consult a professional. Install Steps ♦ Mark the drill holes by holding the foot of the wall bracket at the desired mounting location and marking the hole positions. ♦ Use a drill with a 6 mm drill bit to drill the required holes and insert the plugs and insert the wall plugs flush with the wall.
Remote Control by Mobile App/ Wi-Fi Connecting This camera can be remotely operated almost full functions via a Pad or Smartphone. Before perform remote control of this camera, an APP named “GcamPro” should be downloaded from “Apple App Store” or from “Google Play Store” and installed to your Pad or Smartphone.You can also scan this QR code to download directly. Connect of Camera and Pad/Smartphone via WiFi 1.
a new interface will pop up, please click the device you want to connect and click “+Add” to jump to the Bluetooth list.If you find the Bluetooth hotspot of GcamPro and click it, will pop up"Send bluetooth instructions..." then will pop on "WIFI on please connect" and the WIFI list will pop up automatically.
see this hotspot , please to wait or refresh), then enter the initial password "12345678" to enter the WIFI connection; 5. After WIFI connection is successful, please turn back to APP.Users can operate the corresponding functions in the APP (view files of the memory card, settings, device information preview, albums,etc.
Power button Click the power button will prompt a confirmation:Is the camera turned off? Options:CANCEL/AGREE. If you choice the agree,will exit WIFI connection and exit the APP, the device will enters the sleep hunting mode. Memory card button Click memory card button, user will see the photo and video files stored in the memory card. Click the icon EDIT on the top right corner, then can choose the pictures or videos to download,delete or share the files,you also can select all.
User also can see the see real-time images from the camera. Click the refresh icon, can refresh image and can store the current image to your phone album. Click the Album button to view the photo and video of the memory card.Click on the photo which you want to save to your phone. Click the icon EDIT on the top right corner, then can choose the pictures or videos to download, delete or share the files,you also can select all.
video what have downloaded in the pad or smartphone album. Can zoom in image, playback,choose, delete and share files. 6. After the APP operation is completed, return to the main interface, click the Power off button in the upper right corner to shut down and exit the WIFI connection, the device will enters the sleep-hunting mode. Tips: 1.
enter sleep-hunting mode; 4.When WIFI connection is successful. If there is no information interaction between the camera and the mobile phone, the camera will automatically disconnect after 3 minutes and enter the sleep-hunting mode. 5.After the device has been added to the APP, when opening the APP again, you only need to connect the camera, and then click the device to be connected, no need to add a network.
2. Open [My Computer] or [Windows Explorer] and double-click the removable disk icon that represents the memory card. 3. Copy image or video files from the memory card to your computer. Connecting the Camcorder to a PC by the USB Cable 1. Connect the camera to the computer via USB cable.Turn on the camera,the screen will display”MSDC“. 2. Open [My Computer] or [Windows Explorer]. A"Removable Disk" appears in the drive list. Double-click the "Removable Disk" icon to view its contents.
使用说明书 25
外形结构 1. 红外感应 2. 麦克风 3. 镜头 4. 主传感器 5. 外接电源孔 6. 辅传感器 7. 指示灯 8. TF 卡槽 9. USB 接口 10. 向左键/回放键 11. 开机-测试-关机档位开关 12. 向下/拍照模式键 13. 菜单键 14. 确认/快门键 15. 向右键 16. 向上/录像模式键 17. 扬声器 18.
19. 锁扣 电池充电 使用本产品前,用户可根据需要进行选择电池充电或者 DC 供电。 若选择电池供电,请先插入电池。本机器支持使用 1.5 V AA 电池 和 3.7V 18650 锂电池。 ♦ 若选择使用 1.5 V AA 电池时,请打开打猎机,找到电池仓,装 入 4 节 1.5 V AA 电池。装入电池时候请确保电池极性方向正确。 ♦ 若选择使用 3.7V 18650 锂电池时,请打开打猎机,找到对应电 池仓,可装入 1~2 节 3.7V 18650 锂电池。装入电池时请确保电 池极性方向正确。(可用 DC5V1.5A 以上的 USB 充电器对机器的 3.7V 18650 锂电池进行充电,充电时面壳的指示灯会亮红灯,充 满红灯灭) ♦ 当使用 DC6V1.
插入内存卡 本产品没有内置内存,请在使用前,先准备一张 TF 卡。如果不插入 存储卡,相机将不能保存任何数据。拍摄前,请先将 TF 卡格式化, 可提高电池寿命和快门速度。 ♦ 支持 TF 卡,最大容量为 512 GB。建议用户使用 6 级或以上的 高速卡。 ♦ 为了避免故障,储存卡应远离水源,避免强烈振动、粉尘、热源 和 阳光直射。 ♦ 不要强行插入存储卡,按照产品上标识的方向插入。 ♦ 第一次使用时,应该待存储卡温度达到环境温度后再进行拍摄。 打猎机可能会受到环境温湿度的影响而导致短路,所以在室外使用 时应注意对产品的保护。 ♦ 当存储卡空间已满时,摄像机将会自动停止拍照、录像。 ♦ 拔出 TF 卡时,轻轻按下卡的突出边缘,弹出存储卡。 28
基本操作 开关机 插入电池或者接入电源后,将模式开关拨到“测试”/“开机”档 位,开机。开机后进入电池类型选择界面:1.5V 碱性电池/3.7V 锂电池,按上下键选择对应电池,按 OK 键确认。 将模式开关拨到“关闭”档位,摄像机关机。 系统设置 将模式开关拨到“测试”档位,可对摄像机进行设置操作。 1. 按菜单键打开设置菜单。 2. 按上/下键浏览菜单。按确认键打开选项界面。 3. 按上/下键浏览选项。按确认键确认设置。 4.
照片分辨率 设置静止图片的分辨率。 选项:【20MP(6144x3456P)】/【16MP(5376x3024P)】/ 【12MP(4608x2592P)】/【8MP(3840x2160P)】/【5MP (3072 x1728P)】/【3MP(2304x1296P)】/【1MP(1280x720P)】. 连续拍照 设置相机连续拍照数量。拍照模式下,相机会连续自动拍摄相应张 数的照片。 选项:【拍照 1 张】/【连续拍照 2 张】/【连续拍照 3 张】/【连 续拍照 10 张】。 录像分辨率 设置视频分辨率。分辨率越高,能够存储的视频时长越短,反之越 长。选项:【1920x1080P】/【1280x720P】/【848x480P】/ 【720x480P】/【640x480P】/【320x240P】. 缩时录像分辨率 设置缩时录像的分辨率。 选项:【8MP(3840x2160P)】/【5MP (3072 x1728P)】/ 【3MP(2304x1296P)】.
录像长度 设置录制一段视频的时间长度。最短为 3 秒,最长为 2 分钟。 选项:3 秒~2 分钟。 录音 设置录像时是否同时录制声音。 选项:【开】/【关】。 移动感应推迟 设置相机感应到移动后,延迟拍摄的时间。在选定的时长内,相机 不会记录任何图像或视频。以防止内存卡存储太多同一事件,占用 内存容量。 选项:5 秒~60 分钟。 移动感应灵敏度 设置传感器的灵敏度。在室内所受到的环境影响很小,应选择”高 灵敏度“,在室外时,环境正常情况下选择“中灵敏度”,当外界 环境对拍摄有很大影响时选择”低灵敏度“。温度也会影响到灵敏 度。“高灵敏度”设置适用于温和环境,“低灵敏度”试用于寒冷 31
的环境中。选项:【低】/【中】/【高】。 设定 监控时段设定 监控时段 开始: 结束: 设置摄像机的监控时间,可设置相机录制的 时:分 时:分 具体时间段。如图所示,可以设置摄像机录 00 00 00 00 制的起始时间和结束时间。设置完成后,每 MENU 回车 OK 选择 天摄像机只会在设定的时间段内录制,其他 时间处于待机状态。 选项:【开】/【关】。 监控时段 2 设定 设置摄像机的监控时间,可设置相机录制的 监控时段设定 结束: 具体时间段。如图所示,可以设置摄像机录 开始: 时:分 制的起始时间和结束时间。设置完成后,每 时:分 00 00 00 00 天摄像机只会在设定的时间段内录制,其他 MENU 回车 OK 选择 时间处于待机状态。 选项:【开】/【关】。 定时拍照 此菜单下有三个选项。 32
【标准】:可设置摄像机的定时拍照间隔时间。例如,设置间隔时 间为 1 小时,机器就会在每 1 小时拍摄一张照片。若想观察植物 的开花过程,将机器放置 24 小时,就会有 24 张照片,开花的全 过程即可记录下来。 【缩时录影】:可设置间隔时间。间隔时间可以从 1 秒-24 小时自 行调节设定。例如,设定时间为 1 小时, 设定 机器每隔 1 小时自动定时拍一张照片。如 定时间隔设定 放置 24 小时,即 1*24=24 张照片,最后 机器会将这些照片自动合成一个录像文 件。 时:分 :秒 00 00 30 警告: 将关闭移动感应功能 MENU 回车 OK 选择 【关】:关闭此功能。 语言 设置屏幕显示语言。选项:[English]/[Deutsch]/[Dansk] /[Suomi] /[Svenska]/[Español]/[Français]/[Italiano]/[Nederlands] /[Portugués ]/ [简体中文]/[繁体中文] /[日本语] 33
循环录像 开启循环录像功能,机器将循环录制视频。 选项:【开】/【关】。 日期&时间 设置摄像机的日期和时间。 设置日期格式:日/月/年, 年/月/日,月/日/年。 设置时间格式:24 小时制,12 小时制。 按左/右键选择要修改的位置,按上/下键修改数值的大小,按 OK 键 确认。 选项:【设定时间&日期】/【时间格式】/【日期格式】。 照片标记 设置是否在拍摄照片时,在照片上保留拍摄的日期&时间/日期。 选项:【时间&日期】/【日期】/【关】。 密码保护 设置摄像机的开机密码,密码为 4 位数,每位数可在 0-9 之间和 A-Z 之间选择。 如果忘记开机密码,可对摄像机进行复位操作,恢复到出厂默认设 置。选项:【开】/【关】 34
WIFI 名称 可查看设备的 WIFI 名称。 WIFI 密码 设置和修改 WIFI 密码。由 8 位数组成,每个数在 0-9 和 A-Z 的大小 写字母字母之间选择。 提示音 打开/关闭按键声音。 选项:【开】/【关】。 格式化记忆卡 格式化存储卡将永久删除存储卡内的所有数据。当你使用一个新的 存储卡或使用的存储卡曾被用于另一个设备时,应先将存储卡格式 化。 选项:【是】/【否】。 系列号 为摄像机设置一个唯一的系列号,系列号为 4 位数,每位数可在 0-9 之间和 A-Z 之间选择。 选项:【开】/【关】。 35
恢复设置 将摄像机所有的设置都恢复到出厂时的默认设置。包括设置的密 码、序列号等。 选项:【是】/【否】。 版本 查看摄像机固件版本信息。 拍照、录影、回放 将模式开关拨到“测试”档位。可手动进行拍照、录影以及回放录 制的文件。 ♦ 拍照:按拍照键切换至拍照模式。按快门键拍摄一张照片。 ♦ 录像:按录像键切换至摄像模式。按快门键开始录像,再次按快 门键停止录像。 ♦ 回放:按回放键进入回放界面,按上/下键浏览已保存的照片和 视频。回放视频时,按确认键播放,再次按确认键暂停,按菜单键 停止播放。再次按下回放键退出回放模式。 回放下菜单: 1)删除当前文档:删除当前照片或视频。选项:【取消】/【删除】。 36
2)删除所有文档:删除卡内全部文件。选项:【取消】/【删除】。 3)幻灯片展示:以幻灯片方式自动播放存储卡中的照片,每张照 片显示 3 秒,按确认键停止幻灯片播放。 4)写入保护:锁定文件,以防文件被意外删除。选项:【当前文 档防写】/【所有文档防写】/【解除当前文档防写】/【解除所有 文档防写】。 工作模式 将模式开关拨到“开机”档位。机器开机后,屏幕上显示倒计时 15 秒后,屏幕将会熄灭,摄像机开始独立运作并进入待机模式。 此时若有动物进入了传感器的检测范围,摄像机将被激活并检测运 动轨迹。如果物体继续向传感器检测的区域移动,摄像机将自动进 行拍照或摄像。如果物体离开了传感器检测的区域,摄像机回到待 机模式。 夜间模式 在夜间模式下,所拍摄的画面只能显示黑色或白色。当长时间记录 37
视频时,低电压可能对机器的稳定性有很大的影响。所以在夜间低 电压情况下,不要录制视频。 安装支架 你可以使用附带的支架将摄像机安装在墙上或树上。安装时要确保 所有的螺丝被拧紧,安装的最佳高度为离地面 1 米左右。 元件 1. 三脚架螺杆 2. 锁紧螺母 3. 枢轴螺栓 4. 固定孔 5. 六角螺栓 6. 墙式插座 7.
工具 ■ 钻孔机 ■ 6 毫米钻头 ■ 十字螺丝刀 警告 ♦ 确保安装位置没有电缆,水或暖气管等经过。 ♦ 提供的墙式插座只适合安装在混凝土或石头墙上。在开始安装之 前,请检查安装位置是否适用此插座。如果有疑问,请咨询专业人 员。 安装步骤 ♦ 使用钻孔机在所需的安装位置打出安装孔。 ♦ 用 6 毫米钻头钻出合适的洞,并插入墙式插座。 ♦ 用螺丝固定支架。 ♦ 拧紧三脚架螺杆和枢轴螺栓。 ♦ 调整摄像机的方向,并用螺母锁定。 ♦ 移动摄像机到最终位置,稍微拧松枢轴螺栓,将摄像机的位置调 39
整好后,再次拧紧枢轴螺栓固定。 通过手机 App/ Wi-Fi 连接远程控制 这款相机可以通过平板电脑或者智能手机远程 操作几乎所有功能。在远程控制本设备之前,需 要从“Apple APP Store”或“谷歌 Play Store” 下载一个名为“GcamPro”的应用程序,并安装到您的 Pad 或智 能手机上。也可以直接扫描二维码下载。 通过蓝牙启动 WiFi 连接相机和 Pad/智能手机 1.在应用商店中下载并安装“ GcamPro” APP 到手机/Pad 上,并开启手机上的蓝牙和 WIFI 功能。 2.将相机的按钮从“ OFF”切换到“ ON”。 3.倒计时 15 秒后,照相机进入睡眠工作模式。(如果照相机 已经处于工作模式,则可以忽略步骤 2 和步骤 3)。 4.打开“ GcamPro” APP,然后点击击“添加相机”按钮。 将弹出新界面跳到蓝牙列表,找到 GcamPro_XXXX 的蓝牙热点并 40
点击添加,会出现提示输入密码,然后输入原始密码“12345678” 进入连接中,机器屏幕亮一下,当跳出如下界面点击连接后进入 WIFI 连接; 41
5.WIFI 热点连接成功后,返回到 APP 界面,可进行 APP 内 的相应功能操作(查看 TF 卡内的文件、设置、设备信息预览、相 册等); 关机 内存卡 设置 内存卡 设置 主页 信息查看键 预览 本地相册 42 关于
关机 点击关机键会出现一个确认提示:是否关闭相机?选项:取消/确 认。若点击确认,进行关机(退出 WIFI 连接),退出 APP,产品 进入睡眠打猎模式。 内存卡 点击内存卡键,用户将看到以下界面显示存储在 TF 卡的照片和视 频文件。点击右上角的图标可进行编辑,可选择图片或视频下载或 删除文件,也可以全选。 设置 点击设置键,用户可以看到相机设置菜单列表。可以在 APP 上设 置摄像头参数。 预览 点击预览即信息查看键,用户将看到下面界面显示的相机存储信 息,文件数量和电量。用户还可以看到当前的图像观看相机。 43
点击刷新图标,可以刷新图像,并将当前 图像存储在手机相册中。 点击图片键可以查看内存卡的图片和视 频,点击想保存到手机相册的图片就可以 保存到手机。点击设置图片,用户可以看 到相机设置菜单列表。可以在 APP 上设 置摄像头参数。 本地相册 用户可以查看 pad 或手机相册中下载的 照片和视频文件。可以放大图像,回放、 选择、删除、共享文件。 6.APP 操作设定完成后,返回到主界 面,点击右上角的关机按钮进行关机(退 刷新 相册 出 WIFI 连接),退出 APP,产品进入睡眠打猎模式。 44 设置
温馨提示 1.连接 WIFI 时,若手机与产品的距离越近,WIFI 信号会越强, 稳定性会越好,下载速度会越快; 2.如 APP 操作完毕,建议点击右上角的关机按钮进行关机,产 品进入睡眠打猎模式,节省电池电量; 3.当产品进入 WIFI 模式,如手机在 3 分钟后没有去连接 WIFI, 产品会自动进入睡眠打猎模式; 4.当 WIFI 连接成功,如产品与手机没有任何信息交互, 3 分钟 后产品自动断开连接,进入睡眠打猎模式。 5.APP 已添加设备后,重新打开 APP 时,只需链接相机,然后 点击需要链接的机器,无需再添加网络。 下载文件到电脑 有两种方法可以将图像从摄像机的存储卡下载到计算机中: • 将 TF 卡插入闪存读卡器中 • 用附带的 USB 线将摄像机和电脑相连。 45
使用读卡器 1. 从摄像机中弹出存储卡然后将其插入到电脑的读卡器中。 2. 打开[我的电脑]或 windows 资源管理器,然后双击代表存储卡 的可移动图标。 3. 将图像从存储卡上复制到计算机中你选择的目录下。 通过 USB 线将摄像机连接到计算机 1. 通过 USB 线将摄像机连接到计算机,开启摄像机。液晶屏上显 示 ”MSDC“。 2. 打开[我的电脑]或 windows 资源管理器,然后双击代表存储卡 的可移动图标。所有文件存储在一个名为 “DCIM”的文件夹中。 3.
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.