Material Specification Sheets Cold Pour Estimating Guide GATEKEEPER SYSTEMS INC.
Material Specification Sheets SealMaster Cold Pour Sealant GATEKEEPER SYSTEMS INC.
Material Specification Sheets SealMaster Cold Pour (cont.) GATEKEEPER SYSTEMS INC.
Material Specification Sheets CrackMaster Hot Pour Applicator GATEKEEPER SYSTEMS INC.
Material Specification Sheets CrackMaster Hot Pour Sealant GATEKEEPER SYSTEMS INC.
Material Specification Sheets Concrete Sealant for Level Surfaces GATEKEEPER SYSTEMS INC.
Material Specification Sheets Concrete Sealant for Level Surfaces (cont.) GATEKEEPER SYSTEMS INC.
Material Specification Sheets Concrete Sealant for Non-Level Surfaces GATEKEEPER SYSTEMS INC.
Material Specification Sheets Concrete Sealant for Non-Level Surfaces (cont.) GATEKEEPER SYSTEMS INC.
Material Specification Sheets 3M ScotchKote Electrical Coating GATEKEEPER SYSTEMS INC.
Material Specification Sheets 3M ScotchKote Electrical Coating (cont.) GATEKEEPER SYSTEMS INC.
Material Specification Sheets Concrete Saw GATEKEEPER SYSTEMS INC.
Material Specification Sheets Tempo Tracker II, Model 501 GATEKEEPER SYSTEMS INC.
Material Specification Sheets Tempo Tracker II, Model 501 (cont.) GATEKEEPER SYSTEMS INC.
Material Specification Sheets Kleen Sweep 27 GATEKEEPER SYSTEMS INC.
Training Checklist 12 Training Checklist Technician: Training Location: Gatekeeper Cart Containment System Concept and Functionality • System Components (Wheels, Antenna, Transmitter, CartKey, Site Management) • Perimeter Based System – closed loop • Store Personnel Training Date: Completed: Yes No Site Survey and System Layout • Survey Checklist • Site Plan (Key Measurements, Antenna Type, Transmitter Location, Sign Location) • Single Loop Enclosed Perimeter (Sample Site Plans) • Double
Training Checklist System Installation • Saw cut the marked area • Clean the saw cut • Install the 14G locking line and twisted pair (use antenna specified in “Materials”) • Splice the sections of antenna together • Seal the saw cut (use pour pot and sealer specified in “Materials”) • Mount the CentralTransmitter • Measure and document antenna resistance (multi-meter required) • Connect electrical power to the CentralTransmitter • Calibrating the CentralTransmitter • Connecting Alarm Rel
Training Checklist Training Checklist - System Troubleshooting Wheel Troubleshooting • Determine the wheel type by revision code • Potential failure modes and troubleshooting them • Cart out-of-balance Date: Completed: Yes No Central Transmitter Troubleshooting • Potential failure modes (visual alarm indicators) Date: Completed: Yes No Antenna Troubleshooting • Visual inspection of the perimeter line • Use of a Tone Generator (see Tool List) to find the break • Dividing the antenna to
Index A G alarm relays, 30 analog mode, 29 Anixter cable, 77 antenna alert relay, 30 antenna roller, 39 anti tilt bars, 35 audible alarm switch, 24 Gatekeeper hook, 38 GS2 System and Components, 2–5 GS2 wheel description, 3 installing, 35 resetting, 62 B I Belden cable, 78, 79 indoor cart containment systems, 57 information tracker, 30 installation calibrating the CentralTransmitter, 29 cart mounted signs, 36 central transmitter location, 20 connecting alarm relays, 30 connecting power, 28 installing
configurations, 8 cutting trench for, 21 finding defects, 68 installing, 22 locating, 93, 94 marking path for cutting, 20 material specifications, 77 on slopes, 9 splicing, 45 temporary unlock, 24 through an exterior wall, 20 through conduit, 22 through curbs, 41 through pvc, 43 troubleshooting with a tone generator and probe, 69 troubleshooting with the Tracker II, 70 with cart collection system, 9 perimeter striping, 31 sample site plan, 32 pourable crack sealant, 83 power alert relay, 30 Progressive Elec